Jump to content
SAU Community

Recommended Posts

hey,

i just bought an R32 GTST type-M with Hicas.

The vehicle drives and handles quite well untill you hit approx 80km/h then it developes a really bad shaking through the steering wheel. Sometimes it is fine untill i hit a bump and then it starts. Also when you are braking you can feel it through the pedal.

I have been underneath the car and had a look to see if any of the bushes have any obvious wear out of them, but all appears fine. I know the shocks were shagged so i have changed them and put coilovers in and it still happens.

I have rotated rims front to back. Still happens.

Im thinking the tie rod ends may be knackered? But any input would be greatly appreciated.

cheers Ben

Link to comment
https://www.sau.com.au/forums/topic/324307-wheel-shake/
Share on other sites

Get the suspension checked out, could be tie rods, or your wheel alignment could be totally fuba, amongst other things. I had wheels shake on my front at around 100kms/hr. Turns out both from wheels were out 30gs each. Balanced problem solved.

Link to comment
https://www.sau.com.au/forums/topic/324307-wheel-shake/#findComment-5286067
Share on other sites

Have you got hub locator rings or do the wheels fit the hob correctly?

Have you taken your wheels to a tyre place to check that they are all balanced correctly?

How is your tyre ware, all even

It could be your tie rod ends, ball joints or wheel bearings?

I would suggest taking it to a tyre/suspension place to get it checked it out

Link to comment
https://www.sau.com.au/forums/topic/324307-wheel-shake/#findComment-5286081
Share on other sites

  • 2 weeks later...

mate if you can feel it through braking

your discs may be warped

i had the same problem, and i replaced my rotors and pads and the problem was gone

if you cant afford to replace rotors n pads then, ask a shop to machine the rotors, its much cheaper

let us know how it goes

Link to comment
https://www.sau.com.au/forums/topic/324307-wheel-shake/#findComment-5307997
Share on other sites

hey,

i just bought an R32 GTST type-M with Hicas.

The vehicle drives and handles quite well untill you hit approx 80km/h then it developes a really bad shaking through the steering wheel. Sometimes it is fine untill i hit a bump and then it starts. Also when you are braking you can feel it through the pedal.

I have been underneath the car and had a look to see if any of the bushes have any obvious wear out of them, but all appears fine. I know the shocks were shagged so i have changed them and put coilovers in and it still happens.

I have rotated rims front to back. Still happens.

Im thinking the tie rod ends may be knackered? But any input would be greatly appreciated.

cheers Ben

i had a very similar problem on my 34, checked all the same things - turned out to be that one of my front brakes were sticking (seized) on and often wouldnt start to shake until it got up to speed, jack the front up and see if its difficult to turn the wheel by hand

Link to comment
https://www.sau.com.au/forums/topic/324307-wheel-shake/#findComment-5315389
Share on other sites

i got a wheel alignment done today, and the shake is still there ay 80km/h now but i can accelarate through it and now it doesnt do it under brakes.

I think im going to change the tie rod ends anyway as they are quite old, so ill see what happens when i do this. I checked the steering arms and these are all straight and the wheels all turn freely.

Also i just chucked in a Hicas lock bar which instantly made it better even without the alignment. So next im going to get the wheels balanced.

Link to comment
https://www.sau.com.au/forums/topic/324307-wheel-shake/#findComment-5317405
Share on other sites

  • 3 weeks later...
i got a wheel alignment done today, and the shake is still there ay 80km/h now but i can accelarate through it and now it doesnt do it under brakes.

I think im going to change the tie rod ends anyway as they are quite old, so ill see what happens when i do this. I checked the steering arms and these are all straight and the wheels all turn freely.

Also i just chucked in a Hicas lock bar which instantly made it better even without the alignment. So next im going to get the wheels balanced.

Get the wheels balanced. Also get them to check for any deformity in the rim (slight buckle) that a wheel alignment may not pick up too well.

Doesn't sound like tie rods, as you'll get it shaking under heavy braking.

:woot:

Link to comment
https://www.sau.com.au/forums/topic/324307-wheel-shake/#findComment-5352009
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • GTSBoy on your suggestion on another thread I had a look at those injectors and ended up getting them because of the quality.  Got the expensive ones.  
    • Hey guys been looking everywhere to try and find the correct gtr hood latch support part number but only found the first half and when I search with that number it sends me to an r34. The first part I found was 62515. If anyone could help me with the rest then I’d really appreciate it. Or if there’s some alternative hood latch support that would work even better cause I can’t find any for sale. (Searched on upgarage, partsouq,buyee,rhdjapan) 
    • If you've only done the upper control arms on the rear, AND you have changed their length (by more than about 1mm) to set the camber you want, then you will definitely need/want to install traction arms also. Adjusting the camber arms on their own WILL introduce bump steer and make the car unpleasant to drive. Most owners have no idea that their car could behave infinitely better than what they put up with. I'm not entirely sure what the Stageas need, but I am thinking that unless you have massive front spring rates and pretty soft rear springs, you have waaaay too much rear bar. Oversteer city, in my estimation. Combined with possible excessive bump steer from maladjusted arms, that could be a recipe for nastiness. ATR43SS2 is not a highflow. It is an outright replacement turbo. It's a little bit bigger than the largest highflow profile that Tao does. Probably a solid 300rwkW turbo where the bigger highflows will be about 30-40rwkW less. Nevertheless, we're only talking about ~300 rwkW, which is well within the abilities of the stock ECu to run with a Nistune on board. I would do so without hesitation - and I will be doing so when I get my finger out and actually get the injectors and AFM installed. But, if you would prefer to drop a whole lot more money on the ECU side, then I suspect you're looking at Haltech. The Haltech fanbois here will all spout on about all the available engine protection you can have, that you can't have with the Nistune option. And they're right. But it doesn't really come for free either. You will spend more money on extra sensors and the like, plus the work to install them. If the engine was built and therefore represented a big investment to protect, then I'd say definitely do it. If you view the current (and forever into the future) shortage of replacement engines as something to prompt similar protection, then also, do it. If you see a destroyed RB25 as an opportunity to put in a Mercedes or other V12 (like I kinda do)... then your perception of the risk/reward might differ. These are good injectors. You can also get a "better" set of the same with more flow matching, for more $$. 1000cc is where you will want to be. You will need an R35 AFM and adapter tube if you want to stay with Nistuned stock ECU. Otherwise, if going Haltech, you can ignore. As for intercooler. Just about anything will do. You're only talking about ~300rwkW. Just put a big core in there. Be aware that return flows do add significant pressure drop and will cost power and will make the turbo work harder to achieve the same goals. If you can manage a proper crossflow, do it. I'm keeping my very good return flow because I'm only expecting to be in the ~250rwkW range, and will live with whatever outcome I get.
    • I have a heap that i have collected if you want some authentic ones still. Pm me if your interested!
×
×
  • Create New...