Jump to content
SAU Community

Engine Runs On 5 Cylinders After Overhaul

Iceman22

By Iceman22,
in Engines & Forced Induction

 Share

Recommended Posts

tridentt150v Grand Master

tridentt150v

Posted
Posted

Try setting No. 5 to BDC and then turn it and see if there is compression, then do the same test with No. 5 on TDC.

This will tell you if you have a stuck lifter etc, because if you set it to BDC on the firing stroke and then screw in a spark plug you have a full chamber of air. You can't get compression if no valves are opening, it doesn't suck in any air to compress.

Iceman22 Contributor

Iceman22

Posted
  • Author
Posted (edited)

I found what the problem was today. One valve on the intake side is not sealing properly, probably because it's bent, even though it's not visible when looking on it.

I added some fuel on the intake side and it went through the valve when it was "closed", while the other valves were not letting through any fuel.

So hopefully someone can fix the bent valve tomorow, looks like buying new valves are quite uncommon.

Edited by Iceman22
  • 2 weeks later...
Iceman22 Contributor

Iceman22

Posted
  • Author
Posted (edited)

The problem is now finnaly solved. After installing new valve on the 5th cyl, all the six cylinder were running.

At first I took it for a long run, and the day after drifted with it on the track for a hour. Today morning I checked the oil and it barely used any :D

So I hope all the cylinders will last for many years in the future without needing to rebuilding it again (CP forged pistons)

Thanks for all the help everyone..

Edited by Iceman22

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ozdavroz
      New to R32 ownership

      By Ozdavroz · Posted

      Very nice - I also have a 92 GTST and hardly see any others around these days
    • xmanz
      Video Edit Programs

      By xmanz · Posted

      When I need something else to edit, I use Movavi. A friend who does video editing on a daily basis recommended me) it's an easy video cutter to use for beginners
    • Skidmore
      Video Edit Programs

      By Skidmore · Posted

      I need to edit some videos for work but I'm not good at all this. Which video editor can you recommend?
    • GTSBoy
      HY51 Fuga Hybrid

      By GTSBoy · Posted

      I think you're really missing the point. The spec is just the minimum spec that the fuel has to meet. The additive packages can, and do, go above that minimum if the fuel brand feels they need/want to. And so you get BP Ultimate or Shell Ultra (or whatever they call it) making promises to clean your engine better than the standard stuff....simply because they do actually put better additive packages in there. They do not waste special sauce on the plebian fuel if they can avoid it. I didn't say "energy density". I just said "density". That's right, the specific gravity (if you want to use a really shit old imperial description for mass per unit volume). The density being higher indicates a number of things, from reduces oxygen content, to increased numbers of double bonds or cyclic components. That then just happens to flow on to the calorific value on a volume basis being correspondingly higher. The calorific value on a mass basis barely changes, because almost all hydrocarbon materials have a very similar CV per kg. But whatever - the end result is that you do get a bit more energy per litre, which helps to offset some of the sting of the massive price bump over 91. I can go you one better than "I used to work at a fuel station". I had uni lecturers who worked at the Pt Stanvac refinery (at the time they were lecturing, as industry specialist lecturers) who were quite candid about the business. And granted, that was 30+ years ago, and you might note that I have stated above that I think the industry has since collected together near the bottom (quite like ISPs, when you think about it). Oh, did I mention that I am quite literally a combustion engineer? I'm designing (well, actually, trying to avoid designing and trying to make the junior engineer do it) a heavy fuel oil firing system for a cement plant in fricking Iraq, this week. Last week it was natural gas fired this-that. The week before it was LPG fired anode furnaces for a copper smelter (well, the burners for them, not the actual furnaces, which are just big dumb steel). I'm kinda all over fuels.
    • LjB123
      RB25 Crankshaft Differences

      By LjB123 · Posted

      Well my freshly rebuilt RB25DET Neo went bang 1000kms in, completely fried big end bearing in cylinder 1 so bad my engine seized. No knocking or oil pressure issue prior to this happening, all happened within less than a second. Had Nitto oil pump, 8L baffled sump, head drain, oil restrictors, the lot put in to prevent me spinning a bearing like i did to need the rebuild. Mechanic that looked after the works has no idea what caused it. Reckoned it may have been bearing clearance wrong in cylinder 1 we have no idea. Machinist who did the work reckoned it was something on the mechanic. Anyway thats between them, i had no part in it, just paid the money Curiosity question, does the oil system on RB’s go sump > oil pump > filter > around engine? If so, if you had a leak on an oil filter relocation plate, say sump > oil pump > filter > LEAK > around engine would this cause a low oil pressure reading if the sensors was before the filter?   TIA
×
×
  • Create New...