Jump to content
SAU Community

Recommended Posts

Hi all,

Ever since I got a sound system installed, my car has troubles starting. It sounds like it's struggles to ignite. After 2-3 seconds trying to start and seems to work as usual. I have this inline fuse and volt meter that sits near the car battery to the boot reading at 12.6V.

What could be the problem?

Link to comment
https://www.sau.com.au/forums/topic/324600-car-starting-problems/
Share on other sites

I ended up buying a new battery as the old one from Japan died. It appears that the Blue 12V antenna booster wire had been spliced to the amp. I think this is the problem, however, the sub and amp seems to turn off when ignition is off. I'll re-wire that one to Blue/White and see what happens. Other than that, I can't see anything out of the ordinary. I also removed that inline volt meter/fuse box under the bonnet with a standard fuse box with 100A fuse.

Edited by theponyremark

step away from the car, you really don't have a clue , who install the stuff ? you void warranty on install by hacking someone elses work?

the volt gauge on the battery has to be wired to shut off with the car,

the factory jap battery is worthless

the extra current from amps kills the little battery quickly

and a bigger fuse doesn't fix problems with wiring.

and last but not least the colder weather reduces the amount of AMPS the battery can provide, "CCA" Cold cranking amps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's right, simple but works. Run out of load? Rescale the table lol. Want to be lazy and not rescale? Drag the K
    • @DraftySquash @Duncan he's not talking about the part that sits against the radiator support, he’s talking about the lip that sits towards the front outside of the car. anyway I had a look at other cooling panels and came across this one https://justjap.com/products/carbing-radiator-cooling-panel-plate-nissan-skyline-r34-gt-t?variant=37829684134087&currency=AUD&utm_source=google&utm_medium=organic&utm_campaign=Advanced feed&utm_content=Carbing Radiator Cooling Panel Plate fits Nissan Skyline R34 GT-T (Coupe)&srsltid=AfmBOoonzPDKqe9NgKi5U0AkFc2XvbXETGmNWvfNcyBT5DUZagMYHg9DZ70 if you take notice it’s the same shape.  well thankfully the justjap listing has a description and it says : - Nissan Skyline R34 GT-T Coupe (M/T -07/2000) this means it’s specifically for a s2. S2’s have different front bars to s1 so that lip with the 3 holes are *probably* mounting points for the s2 bar. im not 100% sure but im almost certain it will still fit a s1 bar       
    • Everyone is too used to learning from places like HPA "how to tune" and what to expect at what point, rather than being able to see "The computer says I'm in cell with Row = 8, column =4, and I can see my fuel is lean, so lets add more" Everyone wants "real units", which helps for someone picking it up for the first time and seeing how bad the tune is if they're not used to touching it.   However, I think for most of us who want to play with it, you're 100% right, we're only needing to learn about it for OUR CAR. Which makes it great, and we don't need to care what the real values are, we just need to know which cell it is, that's causing the lean or rich point, or that we want more ignition timing or less. But again, everyone wants everything super you beaut and nearly self tuning, with VE maps, and a billion compensations...   Though then there's me over here when I'm doing reverse engineering work just reading data in hex format that most people couldn't work anything out from. Yet I can see what's going on.
×
×
  • Create New...