Putting Back Stock Airbox

[Taxi_This]

Firstly, I hope this is the correct section AND i have searched high and low in the DIY section for something of photos or of help.

Purchased a stock airbox for my 33 so I can make the pod redundant. (also I have none of the stock intake piping etc etc.)

BUT

I cant actually put the box in snug and seem to line it up with more than 1 hole. also the bottom two holes (to be cloestest to the headlight) seem like they wouldnt touch.

I'm lost can anyone help or provide photos of a stock airbox fitted from the underside?

[G0DZLR]

is your 33 turbo or non-turbo. there are a few crucial differences with each

[Taxi_This]

my one goes vootoo tuuuu vuuot tutututu and i am 99% sure the airbox I bought was from a turbo one too :-/ or I hope it was.

What are the differences between the two so I can have a looksie

[G0DZLR]

non-turbo ones wont have the correct portions taken out of them to allow the intercooler piping to pass next to them. still running a stock intercooler piping or have you changed that/the turbo? they should line up no worries....

[Taxi_This]

no the piping isnt a hassle hard to explain, will post photos

[lachlanw]

they have a bracket that bolts to the guard . most people remove it along with the air box becaus ewith a pod the bracket is ugly and iseless

[Taxi_This]

ah huh, that would make sense, does anyone have a photo of said bracket so I can buy/fab one up

[Taxi_This]

bumb?