Jump to content
SAU Community

Recommended Posts

Hey guys sorry if this question has been asked before i have been doing some research on HID's iv been wanting to get Bi-Xenons (Hi/Low Beam) installed on my Skyline but my headlights don't contain any type of projectors or reflectors they are just standard S1 R33 headlights.

My question is how many of you are running HID's on your Skyline without Projectors / Reflectors ? etc... and have you had any problems with oncoming traffic (other road users) flashing there lights at you or Cops (defects). I was looking at getting 6000k but a lot of people on this and other forums say that without proper headlights the HID's create glare into oncoming traffic which makes them Illegal to have installed.

Cheers guys any help on the issue is appreciated if this question has been answered directly before link me to the thread i have tried searching but i don't believe it has been asked before.

Edit: i have also read about retrofitting projectors it seems like a decent size job to do but i am not really that committed to getting HID's if that's the only option i have.

Edited by DarkRyda
  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

i hate all cars with HIDs, they do blind people and if you have HIDs on in the rual areas, i don't turn off my high beams (cuz i cant see shit).

HIDs = too bright.

out of every mod you can do, this is really one of the few mods i would actually complain about, simply because it affects me.

edit: it might depend on the HID but all too often they blind me and you really can tell the difference between normal and HIDs. headlights are designed to be short ranged, i don't understand this whole phase of super bright headlights, its the exact opposite of what they are designed for.

Edited by Peter89

Thanks for the input buddy my headlights are using Phillips Crystal Vision Ultra's atm but they just aren't doing it for me i am not looking to upgrade my headlights to HID for the look or just to add another mod to my car its mainly for distance/vision/visibility reasons hence the choice of 6000k HID's.

if you want a light that gets you better/further vision, ditch the crystal vision. for starters they aren't ADR approved, secondly, the more white/blue the light the duller it is. so if you go back to something like the phillips blue vision or even the power 2night bulbs you will get more light, however it won't be as ricey.

There's no point in switching to Blue Visions because they have the exact same output as my current bulbs 4000k i have Crystal Vision Ultra's (only sold in the US) the Australian version of the Crystal Visions are 4300k anyway i don't think switching to another halogen bulb will make a difference, my current ones don't look ricey at all there a soft white.

don't do HIDs on an R33. reflector headlights designed for halogens spill too much light, I haven't seen an R33 with HIDs whose owner doesn't deserve a backhander for the glare it causes other road users.

There's no point in switching to Blue Visions because they have the exact same output as my current bulbs 4000k i have Crystal Vision Ultra's (only sold in the US) the Australian version of the Crystal Visions are 4300k anyway i don't think switching to another halogen bulb will make a difference, my current ones don't look ricey at all there a soft white.

i recently fitted blue visions (4000k) in mine. theyre very white. they give a nice clean light, fairly bright. no complaints from me.

I thought so previous posts are talking as if the normal globes are just as good as HID's they simply aren't : ( have you had any troubles with other road users ? or do you have projectors fitted? also what Kelvin temp did you select.

Edited by DarkRyda

Mine are 6000K, standard series II headlights. I have them pointed a bit down so it doesn't blind people. They are bright and my mates don't like driving in front of me but they say it isn't as bad as some peoples, their problem not mine :D

Sweet thanks for all the reply's : ) much appropriated SAU members are always here to lend a hand thanks guys. Im just wondering whats a good set of HID's besides the Phillips ones because i don't wanna spend $500 on a set of HID's looking at anything $250ish or under ill be sure to get them properly installed : )

Hey guys sorry if this question has been asked before i have been doing some research on HID's iv been wanting to get Bi-Xenons (Hi/Low Beam) installed on my Skyline but my headlights don't contain any type of projectors or reflectors they are just standard S1 R33 headlights.

My question is how many of you are running HID's on your Skyline without Projectors / Reflectors ? etc... and have you had any problems with oncoming traffic (other road users) flashing there lights at you or Cops (defects). I was looking at getting 6000k but a lot of people on this and other forums say that without proper headlights the HID's create glare into oncoming traffic which makes them Illegal to have installed.

Cheers guys any help on the issue is appreciated if this question has been answered directly before link me to the thread i have tried searching but i don't believe it has been asked before.

Edit: i have also read about retrofitting projectors it seems like a decent size job to do but i am not really that committed to getting HID's if that's the only option i have.

Don't do it bro. Read this

http://www.danielsternlighting.com/tech/bu...onversions.html

I've been reading about HID's too. One day when I have an oven that actually works I'm going to open up my headlights and put in those FX-R HID retrofit ones from 'theretrofitsource'. All up including projectors they are going for less than $500 currently.

Google it, there's a guide on how to do it from one of those UK skyline forums.

Either that... or i'll buy cheapass $80 HID projector kits off ebay and retrofit since the car is getting old and is a real moneypit haha

My previous car was a mazda astina I had ebay $60 HID's in it with the stock projectors and it was perfect :P

I would not recommend HID's in a reflector type headlight, glare like anything.

Thanks for the Info Dan iv read a lot of pros/cons about HID's its a pain i just want some decent lighting at night and halogen globes are just not producing that for me! : (

Just get a set of bulbs for like $100 and chuck them in. Yep they are illegal and not perfect in our headlights, so is 90% of the shit on our cars, who cares. Adjust the headlights a bit so they don't blind people as much and you'll be fine. They are so much better than a normal globe and Skyline lights to begin with are pretty crap at brightness. The first thing i did to my motorbike was to put a HID bulb into it as the stock bulb was like holding a candle in front of the bike and was down right dangerous. Best bloody thing I did to the bike.

Edited by PM-R33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...