Jump to content
SAU Community

Recommended Posts

As topic states im trying to sell some gear due to upgrading. All parts were working fine when removed from R33 GTS-T SERIES 1

1: Apexi Power FC with hand controller suits r33 series 1 & 2: $1250

2: Z32 afm with plug: $170

3: Stock Turbo, good condition, only went to 10psi with this: $150

4: rb25 fuel injectors, (can come with rail if needed and injector wiring and o-rings for $150): $100

5: Stock coilpacks RB25det series 1 (fine before removed): $100

6: Standard RB25 exhaust manifold: $20

7: R33 fuel pump: $30

8: Charcoal Canister: $20

9: Top half of intake manifold: $30

10: Intake manifold bottom half (will sell top and bottom for $50): $30

11: Brand new gasket for joining manifold together: $20

12: Turbosmart boost controller 1 way manual tee: $40

13: Apexi pod filter, bolts to standard afm (not sure about the z32 though, never tried): $40

14: Stock blow off valve: $20

15: Stock throttle body (without tps sensor): $30

16: Coil pack harness to ignitor for R33 series 1: $15

17: Front mount cooler piping 2 and a half inch: $80

18: 80mm to Standard size throttle bottle adapter: $30

19: Speco mechanical water temp gauge with sensor: $20

20: Standard boost controller solenoid with connector plug :$30

21: Standard Rotors front(29mm) and rear(17mm) bit of surface rust: $100

free pads with rotors if wanted, fronts not the best, rears are bendix ulimate(pretty much brand new): $20

22: Standear bolt on engine parts i havent listed i should have, just ask, eg: rubber intake hose

Will get pictures if needed but all parts are pretty coming and you should know what they look like

Can email pics straight away, just to lazy to resize them and upload them on here atm.

Pick Up is from North Brisbane, Caboolture.

i think prices are fair but willing to negotiate on some things

I will post if serious about parts, due to no transport atm though only ask if your serious please, i will only charge whatever it costs to send.

not willing to seperate at this stage mate, but if i do i'll let you know.

Power Fc and z32 will sell for $1350 together.

Forgot some things

Standard ECU rb25det SERIES 1 manual: $50

Kicker L7 sub in box: $400 ono

This sub took up the whole boot in the 33 coupe. Sounds awesome. A few scuff marks on the back of the box only on the outside...

sitting on top of 18 inch tyres to give you an idea of the size

post-29115-1276494556_thumb.jpgpost-29115-1276494534_thumb.jpg

Edited by mattis96

Hello, please let me know if your willing to sell the power fc ecu, dont need hand controller. thanks, :D

As topic states im trying to sell some gear due to upgrading. All parts were working fine when removed from R33 GTS-T SERIES 1

1: Apexi Power FC with hand controller suits r33 series 1 & 2: $1250

2: Z32 afm with plug: $170

3: Stock Turbo, good condition, only went to 10psi with this: $150

4: rb25 fuel injectors, (can come with rail if needed and injector wiring and o-rings for $150): $100

5: Stock coilpacks RB25det series 1 (fine before removed): $100

6: Standard RB25 exhaust manifold: $20

7: R33 fuel pump: $30

8: Charcoal Canister: $20

9: Top half of intake manifold: $30

10: Intake manifold bottom half (will sell top and bottom for $50): $30

11: Brand new gasket for joining manifold together: $20

12: Turbosmart boost controller 1 way manual tee: $40

13: Apexi pod filter, bolts to standard afm (not sure about the z32 though, never tried): $40

14: Stock blow off valve: $20

15: Stock throttle body (without tps sensor): $30

16: Coil pack harness to ignitor for R33 series 1: $15

17: Front mount cooler piping 2 and a half inch: $80

18: 80mm to Standard size throttle bottle adapter: $30

19: Speco mechanical water temp gauge with sensor: $20

20: Standard boost controller solenoid with connector plug :$30

21: Standard Rotors front(29mm) and rear(17mm) bit of surface rust: $100

free pads with rotors if wanted, fronts not the best, rears are bendix ulimate(pretty much brand new): $20

22: Standear bolt on engine parts i havent listed i should have, just ask, eg: rubber intake hose

Will get pictures if needed but all parts are pretty coming and you should know what they look like

Can email pics straight away, just to lazy to resize them and upload them on here atm.

Pick Up is from North Brisbane, Caboolture.

i think prices are fair but willing to negotiate on some things

I will post if serious about parts, due to no transport atm though only ask if your serious please, i will only charge whatever it costs to send.

ill give you a call tonight before qld starts kicking ass or tomorrow? let us know what time suits you as i work night shift and dont my mobi is playing up, so will call you off home phone which is private number what ever time suits you... if buying multiple parts will do cheaper to...

As topic states im trying to sell some gear due to upgrading. All parts were working fine when removed from R33 GTS-T SERIES 1

1: Apexi Power FC with hand controller suits r33 series 1 & 2: $1250

2: Z32 afm with plug: $170

3: Stock Turbo, good condition, only went to 10psi with this: $150

4: rb25 fuel injectors, (can come with rail if needed and injector wiring and o-rings for $150): $100

5: Stock coilpacks RB25det series 1 (fine before removed): $100

6: Standard RB25 exhaust manifold: $20

7: R33 fuel pump: $30

8: Charcoal Canister: $20

9: Top half of intake manifold: $30

10: Intake manifold bottom half (will sell top and bottom for $50): $30

11: Brand new gasket for joining manifold together: $20

12: Turbosmart boost controller 1 way manual tee: $40

13: Apexi pod filter, bolts to standard afm (not sure about the z32 though, never tried): $40

14: Stock blow off valve: $20

15: Stock throttle body (without tps sensor): $30

16: Coil pack harness to ignitor for R33 series 1: $15

17: Front mount cooler piping 2 and a half inch: $80

18: 80mm to Standard size throttle bottle adapter: $30

19: Speco mechanical water temp gauge with sensor: $20

20: Standard boost controller solenoid with connector plug :$30

21: Standard Rotors front(29mm) and rear(17mm) bit of surface rust: $100

free pads with rotors if wanted, fronts not the best, rears are bendix ulimate(pretty much brand new): $20

22: Standear bolt on engine parts i havent listed i should have, just ask, eg: rubber intake hose

Will get pictures if needed but all parts are pretty coming and you should know what they look like

Can email pics straight away, just to lazy to resize them and upload them on here atm.

Pick Up is from North Brisbane, Caboolture.

i think prices are fair but willing to negotiate on some things

I will post if serious about parts, due to no transport atm though only ask if your serious please, i will only charge whatever it costs to send.

hey mate is the z32 still up for grabs and wat size and condition is it in ? pm me back im in syd if your interested in shippin if the condition is right :D thanks mate

tried calling this morning no answer and no voicemail so couldnt leave a message. had interest but no buyers yet. am negotiable on some things...

Dont know how to edit original post.

PRICE DROP on POWER FC: $1200 Delivered

PRICE DROP on Z32: $160 Delivered

TOGETHER: $1320 Delivered

Edited by mattis96
Dont know how to edit original post.

PRICE DROP on POWER FC: $1200 Delivered

PRICE DROP on Z32: $160 Delivered

TOGETHER: $1320 Delivered

hey m8 sory about late reply but yes i am still very interested ive just been trying to track down a NAB send me a pm and i will do a deposit at 11:00am wednesday morning

hey m8 sory about late reply but yes i am still very interested ive just been trying to track down a NAB send me a pm and i will do a deposit at 11:00am wednesday morning

very interested pm me if not already sold

hey buddy, deposit recieved thanks, will send out first thing thursday morning, do you want it express or registered?

update on whats sold.

power fc

front mount piping kit

turbosmart boost controller

standard blow off valve

z32 afm pending payment / collection

coilpacks

hey buddy, deposit recieved thanks, will send out first thing thursday morning, do you want it express or registered?

update on whats sold.

power fc

front mount piping kit

turbosmart boost controller

standard blow off valve

z32 afm pending payment / collection

coilpacks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...