Checking Fault Codes On An R33?

[TUF250]

Hi all,

I have searched on this and Im sure its here I must just be blind?? wondering if someone has a link they can send me to a thread that im sure exists or tll me what the thread is called.

Basically I want to know if you can DIY check ECU fault codes on an R33 GTS-T series 2?

I made up a lflashing led for my old XR8 which you plugged into the diagnostic port and referenced the flashes against the manual to give the fault codes.

I would like to know if there is a similar process in the 33 and how it can be done or at least if there is a thread about this.

thanks!

[yumcha33]

http://www.skylinesaustralia.com/forums/EC...198-t35733.html

That's how you do it on a RB20DET...

It's the same on an RB25DET except there is two lights.

The first light is the first digit the second light is the second digit.

ie. Light 1 (Blink = 1) Light 2 )Blink, Blink +2). So therefore you have 12 which is AFM.

[TUF250]

thanks mate! where is the screew that they are talking about? is it on the ecu or under the dash?

[mad082]

the slightly more expensive way, but it is much easier to check the codes, as well as other things is with a consult cable. google ecutalk or contact newkleer on here. will set you back about $70 but it is simple and you can use the software to monitor things like o2 sensor, afm voltage, etc anytime you are having an issue. i have one and i love it. rarely use it but when i do it makes life much easier.

[Shazza24]

^^^

+1 Consult cable, is the way to go!!

[Galois]

or if you can't be bothered with the leds

http://www.skylinesaustralia.com/forums/Re...de-t266512.html

really, really easy way to check for fault codes and reset the ecu, which should be done every now and then

[TUF250]

swesome info, thanks guys!