Jump to content
SAU Community

Recommended Posts

selling all this gear for my brother he cant be bothered with finishing his car anymore, pm me for more details.. prices are in item details.

If there is no picture for the item you are after pm me and i will get on asap.

anything you see for that looks new is new, maybe only taken out for test fitting..

PM ME LOCATED IN BRISBANE

ITEMS

APEXI - rx6 rb20/25 complete turbo kit

-comes with everything; dump pipe, intercooler pipes including crossover, intake and hot pipe, screamer pipe, wastegate, vacuum lines, manifold, silicone, hoseclamps, z32 afm plug, apexi filter, thermal tape, thermal ducting

unspeakable quality.

price - $5650

tomei type a rb20/25 valve springs - $390

long motor - rb20det - tomei poncams, tomei cam gears, cp pistons, spool rods,

tomei mhg, brand new oem water pump, brand new oem oil pump, gates high performance timing belt

$3000 - pm for more info

Greddy type r bov - $300

plazmaman rb20 plenum and 72mm throttlebody - $1300

6x 800cc power enterprise top feed injectors - $800

TL800AC-C - PE 800cc Low impediance, Twin hole, Yellow greenish (Connector included)

rb20 splitfires - $500

s14 d2 coilovers - $750

s14 Front/rear slotted rotors + calipers - bit of corrosion from sitting around for nearly a year now,

still plenty of meat left on both the pads and the rotors - $700

Autronic smc ecu + autronic cdi 500 - $1650 - has tune for 3071r, 850cc power enterprise injectors, step 1 hks 256 cams

comes with all necessary plugs and patch loom to suit s14 s2

Blitz i-color boost controller kit - $650

s14 complete boot trim - $200

cusco s14 strut braces - front = $150 rear = $100

turbosmart vee port bov - $90

carbon fibre wing - comes with mounts and is adjustable - $200

NPC 5 puk clutch for rb20/25 - $500

s14 spoiler - not sure of make.. needs a paint - $100

rb20 head, no caps/bare - $150

sard red fuel reg - $120

s14 s2 cluster - 151thousand k's - vgc - $125

r32 rb20 crossmember - $150

s14 manual tailshaft - $130

r32 diff - $200

ABS system for s14 - $350 - lines included

rb20 bottom end - $150

rb20 alternator - $85

rb20/25 cas mount - $60

rb20 fuel rail - $60

rb20 cas - $120

rb20 throttle body x 2 - $65 each

rb20 tps x2, half moon imput - $60 each

rb20 stock rockercover crossover pipe - $40

rb20 cam gears x 4 - $15 each

rb20 rocker covers - $100

rb20 timing belt covers full set including backing plate - $125

rb20 water pump - $40

rb20 coilpack mounts - $35

rb20 water pump pulley - $25

rb20 idle valve - $35

rb20 intake manifold runners - $65

hks bov - ssqv flange - $30

pfi fuel rail - $25

s13 rear reo - $70

s13 rear tail lights + bulb holders - $120

s13 rear garnish satin black - $50

s13 rear bar black vgc - $100

s13 - t25g - $100

ALL DIRTY PARTS IE TURBO AND ROTORS WILL BE CLEANED BEFORE POST OR LOCAL SALE

P6140042.jpg

P6140043.jpg

P6140045.jpg

P6140046.jpg

P6140051.jpg

P6140052.jpg

P6140055.jpg

P6140056.jpg

P6140057.jpg

P6140058.jpg

P6140060.jpg

P6140061.jpg

P6140063.jpg

P6140065.jpg

P6140066.jpg

P6140074.jpg

P6140075.jpg

P6140077.jpg

P6140078.jpg

P6140085.jpg

P6140086.jpg

P6140087.jpg

P6140092.jpg

P6140096.jpg

P6140098.jpg

P6140100.jpg

How old is fuel reg and will u post????

fuel reg has probably seen less than 500kms in its life.. sat in garage for nearly 2 years now though..

yes i will post.. $7 express for that one.

Interested in FRONT coilovers (pair) for s14!!! + rear brace! PM me If you will seperate!!!

sorry man, wont be keen to seperate those either..

and cusco front and rear strut braces have been sold..

What would you describe the condition of the coil overs? I might be interested if they are pretty good

pm sent.. coilovers are in vgc, just very dirty as they have been sitting for nearly 1.5 years.

  • 3 weeks later...
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • If doing that ^, I'd take the idle up valve out and plug the hole in the pump.
    • You can try capping the power steering idle up valve at both ends if it's old. The valve and the intake manifold. That is something that is known to fail in Toyotas with age and it will suck power steering fluid into the intake and burn it in the engine which can cause issues. Then bleed it again with engine off first. Do like 30+ lock to lock turns with the front wheels off the ground.
    • Hi Brent, I am wondering if you ever worked this out? I have upgraded this unit to a newer one and everything works bar the reverse camera, so i really want to know what plugs are what so I can patch the camera through. many thanks in advance Mike
    • Once you have to get up in the morning and be useful, you suddenly value sleep it turns out :p
    • Update:   smoke test all pipes no issues cleaned reservoir   fluid put in ( dexron 3 atf)   steering turn side to side and could hearing  gurgling from steering rack which I assumed was air lock, opened one of the steering rack connections and could see loads of air getting pushed out( not sure if you meant to do that / whether it will re introduce air into system)   anyways, loads of side to side sound was gone. Turned car on, pump was slightly ( barely) wining so turned side to side few more turns and fluid level when car on was almost none in resorvoir which I guess is normal if car is one. Turned car of and fluid was gushing out. Almost 200-300cc was pushed out. Repeated engine off side to side followed  by engine on and same result       going mad now. It seems system is either sucking air in whilst on or there is tons of air which I am not giving it enough time to bleed. Thoughts?   would it work like brake caliper if I open steering rack copper pipes and let gravity pull all air out?   or maybe have a restriction somewhere? What is the red circled item, could that be blocked? It i
×
×
  • Create New...