Jump to content
SAU Community

Recommended Posts

Hi rob and welcome to SAU. A few little details. Please ALWAYS use the search function (top right corner of the page) and see if your topic has been covered before. In almost all cases it has. Please DO NOT just make up new topics willy, nilly - we have enough trouble with important information topics being kicked off the front page in no time for the forums to be filled with redundant threads that have been answered before.

So, I suggest you go do a search and check the stickied 'workshop information' thread in the sticked thread section at the top of the SA forum.

i had my alarm installed by GT Autosound......they did an awesome work.....also had dealings with Auto Perfection and loved the service and quality of work from there too mate.....how far down south are you talking and if your willing to drive up a bit north as well :D

or save money....get a viper alarm and you wont regret it.....loads of functions and pretty cheap as well......then get it installed :P

Also one of the easiest alarms to get past if you know what youre doing :D

But in saying that, no alarm is good enough to stop someone from taking your car that knows what theyre doing anyways...

Edited by SkyHi_33
if someone is going to take my car then they are going to do whatever it takes to get it......regardless of what i do mate.....but a viper is a good enough investment for me

Also probably a good idea to not let people know what alarm you have ;P

I know its unlikely that any SAU member will be considering stealing a car but even car crims in lizbef have net access nowadays

-D

Troy you don't even need an alarm to be covered by insurance unless they absolutely made it clear that they wouldn't insure you without one.......if that was the case, they would tell you exactly what to install.

Having said that, best to always air on the side of caution and check with your insurance company as Troy stated....it's only a phone call.

I have no problem whatsoever with a dirty big blue VIPER symbol flashing on my dash window .... and it would seem the crooks do respect it, as I haven't had anyone touch my car (except for one small testing incident) and I park it everywhere. They also don't know it is the black wired version, I have 2 kill switches, and I have 4 of the loudest piezo screamers you have ever heard .... if their ears can take 30-90 seconds of those things going off in their ears while they hotwire the car, then they can have it.

well I've had Just Cars and Shannons and they both require alarms with proper immobilization points for agree coverage on my car

in case you want a real scare on car theft go here

CARSAFE theft stats per car

good old Adelaide, at least they can come first at something..lol

they must meet these regulations

AS/NZS 4601:1999 certified system include:

➜ Automatic immobilisation within 40 seconds

of ignition switch off;

➜ 2 independent points of immobilisation;

➜ Connections enclosed in security housing;

➜ All black security wiring;

➜ Flashing dashboard LED to indicate that the system

is armed; and

➜ Secure owner PIN override.

the alarm is only as good as the install, and the 100% use of it, even when it's in your garage

and there isn't any alarms that can't be cracked by a pro. if they want your car it's gone.

but it will prevent 95% of the other idiots from taking your car

multi layer security is best and common sense, don't leave your car in the hood..lol

in case you want a real scare on car theft go here

CARSAFE theft stats per car

good old Adelaide, at least they can come first at something..lol

Lol:

YOUR POSTCODE

With 5 or more thefts reported each week, postcode 5108 is one of the highest theft risk locations. We recommend that you read these simple precautions you can take to protect your vehicle from theft.

YOUR CAR

The NISSAN SKYLINE 1998 was not fitted with an immobiliser when it was manufactured and unless it has been fitted with an Australian Standards approved immobiliser since then it is at risk of theft.

New passenger cars sold in Australia are required to have an immobiliser but before 2001 many cars weren't fitted with them. As a result these cars are targets for opportunists to 'hotwire' using something as simple as a screwdriver.

Engine immobilisers provide the most effective barrier available between a thief and your car, as long as you keep your keys safe. Click here for more information.

I am with Just Cars Troy and all they wanted was any alarm with 2 point immobilisation. The original version of my alarm didn't come with black wiring and they didn't give a toss about it when I told them. I even gave them my alarm model number and they looked it up and said it was fine.

so what does an insurance company do when it comes to a pay out if the car is never recovered or burnt to the ground (unable to confirm proper alarm installation if any)........they payout regardless of policy

Well respected insurance companies - such as Shannons - specify a particular standard of alarm system (as per AS/NZS certification) and required documentation to prove installation by an accredited installer - I have both documents noted on my Shannons policy. As for insurance companies such as JC... if one doesn't have anything nice to say, best not to say anything at all.

When I crashed my S15 (my fault) JC were awesome in letting me choose repairer, varying the amount of work done (I added a fg bodykit in leiu of the standard bars they had allowed for). I really can't complain at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's the thing....the basics of fuel and ignition are deceptively simple.....getting it to behave like factory in all conditions after airflow mods is way more complex. Newer cars like the V37 are all about modifying the standard ECU which is about a billion times more complex than they were 20 years ago, with a bunch of parameters affecting others
    • The larger TB I had on the SS was a pain to get to idle right, but, that was cable In the end they just raised the idle up a couple of hundred RPM so it was happy idling away either in gear or in park (slush box life) I'm curious on how my NC will idle with the new intake, larger TB, and cams that are currently going in/on, but I have faith that MX5 Mania will sort this "electronical" "black magic" out the best they can in the tune with a electronic TB Sometimes I wish I knew more about the intricacies of tuning, but most of the time I don't because I know it would hurt my brain 🤣
    • That's the thing. Cam is smaller than before.. though the old cam was +6 degrees advanced. We're talking huge changes here, the narrowbands want to trim out 20% of fuel and pull the (wideband) idle to like 16.0 AFR or such. One side is a little more trimmy than the other. Think along the lines of ~20% to ~15-18%. Unfortunately my scouring of the internet hasn't really found anyone with this issue. People either just disable NB's or have them wildly different, where one is -20% and the other is +20 or 0 (i.e a sensor is just dead/wiring is just busted). Turning them off and relying on the base map only results in the wideband reporting at about 14.0 with the Varex closed. It'd be a little leaner (closer to 14.7ish) with the Varex open. I know I can just change the switch points so that the narrowbands agree with the wideband, but it's still odd. Both of them are reading voltage, it's just that they're reading quite high mv, in the ~800 region. It's just odd. This was with the IAT fudged to report it was about ~22 degrees which is my guesstimation of the temperature in the room. I have an OEM sensor ready to try tonight, which is slow and crap - but .. worked last time I used it. Sadly I am aware that idle tuning with the big TB is going to be a PITA and I look 'forward' to many hours spent stalling or stumbling idle or delving into drivability things.
    • The GTR strut brace clears the new manifold.. by about 0.5mm. So this means I need to buy an OEM GTT Strut brace (again), which will clear the new manifold, but not the bonnet vents. I guess I can sell the GTR Strut brace with the bonnet with the vents as a package deal as someone will need this one day. So my choices are vented bonnet but no strut brace, or GTR Bonnet with OEM brace (which I have to buy) but is bright red instead of the same colour as the rest of the car, which means the entire front end of the car will just be red until it goes back to paint jail. In other news the engine starts and doesn't leak. Why both O2 narrowband sensors think the tune is rich AF I do not know. The idle is also pretty shitty and my expensive IAT sensor from the USA is dead. The car sounds awful. But I assume or at least hope this is due to the many exhaust leaks, and the concrete garage it is in, sitting there with 0 intake bolted to it, and no bonnet or panels or anything to stop the induction/intake sound which is about 200db.
×
×
  • Create New...