Jump to content
SAU Community

Timing Belt

JAS-25T

By JAS-25T,
in General Maintenance

 Share

Recommended Posts

predator Grand Master

predator

Posted
Posted

The TRust one is meant to be stronger and last longer - it could make sense if they make the belt thicker and use better quality rubber. At $150 or so compared to $110 or so for the nissan, I'm going to give that a try..

Also going to get a "no-name" water pump for like $90 instead of $150..

JimX Grand Master

JimX

Posted
Posted

Why does a timing belt need to be stronger? It's not under and great deal of stress. If it was harder wearing or longer lasting, that would be more important I would have thought. But even the factory belt will do over 100k km, and it's sensible to change it at 100k no matter what the brand. So I can't see any point in paying double for a timing belt that's "10% stronger".

predator Grand Master

predator

Posted
Posted

"stronger" as is in it lasts longer, thats what i meant.. anyhow, that is only their claim, but its not much more in price, and its blue ;)

As the timing belt gets older it can stretch, meaning it can throw out your timing .. one that doesn't stretch as much as in gets on in life would be better therefore I'd imagine. And the 100,000km "replace" interval is for the genuine nissan item.. don't mean there can't be an aftermarket that lasts longer and exceeds manufactur specifications. I would see it no different to the pricipal that: you can take thick rubber band and stretch it a lot and it will remain its elacity and less risk of snapping for longer than a thinner rubber band subjected to the same.

RiGo Community Regular

RiGo

Posted
Posted

A stronger timing belt is a good idea with higher horsepower applications. Higher HP engines accelerate more quickly and thus put more strain on the timing belt. More strain = faster wear, more stretching, more prone to snapping, etc.

But yeah... on normal cars I don't think the extra $$$ is worth it.

Why does a timing belt need to be stronger? It's not under and great deal of stress. If it was harder wearing or longer lasting, that would be more important I would have thought. But even the factory belt will do over 100k km, and it's sensible to change it at 100k no matter what the brand. So I can't see any point in paying double for a timing belt that's "10% stronger".
supra Community Regular

supra

Posted
Posted
I am getting my Major service done next tuesday for just over 600, with all parts and labour.

Genuine Nissan water pump was $123, getting all 3 belts done and the usual stuff.

Flaps, where are you getting it done.

both Unique and Hills Motorsport charge over $1000, I am going to do it soon! is it worth it, can you please check if the $600 you paid for covered the things they mention on their website? how long did it take? the mechanic said it's 8 hrs long!

Flaps Rising Star

Flaps

Posted
Posted
Flaps, where are you getting it done.

both Unique and Hills Motorsport charge over $1000, I am going to do it soon! is it worth it, can you please check if the $600 you paid for covered the things they mention on their website? how long did it take? the mechanic said it's 8 hrs long!

Supra : I am getting it done at ProConcept, in west ryde, next Tuesday. As far as ive heard he does a good job and always does it right the first time. It is an all day service.

Unique said $1300 for a major service, haha i laughed. Who needs the door hinges oiled? Anyone can do that themselves.

I didnt ask hills, because i heard they only did nissans and when i drove past there were 2 WRX's on the stands, also they stuffed my mates 200sx.

RiGo Community Regular

RiGo

Posted
Posted

I have another question...

Is it possible to replace the idler pulley with a non-Nissan item. I ask this, because the cheapest idler pulley I found was $282. RIP OFF!!!!!

I know the tensioner is the same as the one in VL Commodores so I'm wondering if the idler can be sourced from elsewhere...

;)

supra Community Regular

supra

Posted
Posted
I have to correct my previous posts, there was a communication brake down between me and mechanic.

Major service is $700 and Water Pump and belts $600 :mad:

It's cool mate! so are you still getting it done there? I might stick with hills... or unique.

ALOT of money spent on my Nissan Skyline already! I don't have supra... it's just a funny name i've made up for this "Skyline" forum. lol :wassup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      The Evolution Of "night Fury"

      By Murray_Calavera · Posted

      Price seems pretty good to me. Also seems a hell of a lot cheaper then buying another vehicle that only ever gets used for towing.  I'm a long way from you mate, I'm a couple of hours out of Brizzy. 
    • niZmO_Man
      Dumb rich kid tries modding for the first time

      By niZmO_Man · Posted

      New [400]Z, they're available in manual and you don't have to worry about parts scarcity. 
    • turbo76lx
      Torana Lx Gtr Hatch, Lots Of Pictures

      By turbo76lx · Posted

      Just planning to have the wiring neat and hide as much as possible.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      The sodium acetate, mixed with citric acid, doesn't actually buffer each other. Interestingly though, if you used Sodium Acetate, and acetic acid, THAT becomes a buffer solution. Additionally, a weak acid that can attack a metal, is still a weak acid that can attack a metal. If you don't neutralise it, and wash it off, it's going to be able to keep attacking. It works the same way when battery acid dries, get that stuff somewhere, and then it gets wet, and off it goes again breaking things down. There's a reason why people prefer a weak acid, and it's because they want TIME to be able to be on their side. IE, DIY guys are happy to leave some mild steel in vinegar for 24 hours to get mill scale off. However, if you want to do it chemically in industry, you grab the muriatic acid. If you want to do it quicker at home, go for the acetic acid if you don't want muriatic around. At the end of the day, look at the above thumbnail, as it proves what I said in the earlier post, you can clean that fuel tank up all you want with the solution, but the rust that has now been removed was once the metal of the fuel tank. So how thin in spots is your fuel tank getting? If the magazine on the left, is the actual same magazine as on the right, you'll notice it even introduces more holes... Well, rust removal in general actually does that. The fuel tank isn't very thick. So, I'll state again, look to replace the tank, replace the fuel hanger, and pump, work out how the rust and shit is making it past the fuel filter, and getting into the injectors. That is the real problem. If the fuel filter were doing its job, the injectors wouldn't be blocked.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      Despite having minimal clothing because of the hot weather right now, I did have rubber gloves and safety glasses on just in-case for most of the time. Yes, I was scrubbing with my gloves on before, but brushing with a brush removes the remaining rust. To neutralize, I was thinking distilled water and baking soda, or do you think that would be overkill?
×
×
  • Create New...