Jump to content
SAU Community

Recommended Posts

A while ago someone posted up Teng Tools 14mm sump plug removal socket. Went into Supercheap on Sunday and they are selling a full kit of every sump plug socket you could ever need made from chrome vandium steel in a metal box for $30. The brand is Protool.

PS: the Teng one is on backorder, they have run out of stock. S

Again? The were out of stock when it was being discussed before (so around 23rd Sept), but mine got delivered in pretty quick time anyway. Maybe a week, two weeks tops.

Again? The were out of stock when it was being discussed before (so around 23rd Sept), but mine got delivered in pretty quick time anyway. Maybe a week, two weeks tops.

Teng on backorder roughly two weeks wait atm. I already ordered before finding excellent set in Supercheap.

*drools.

The Bursons rep dropped passed the workshop the other day and convinced us to grab one of these. Apparently fully rebuildable and rated to 600Nm. Its good for getting into those tight spots. For a couple hundered dollars, you can't go wrong.

post-30549-13825716319272_thumb.jpg

*drools.

The Bursons rep dropped passed the workshop the other day and convinced us to grab one of these. Apparently fully rebuildable and rated to 600Nm. Its good for getting into those tight spots. For a couple hundered dollars, you can't go wrong.

enough clearance for rb crank bolts?

Hmm I can't comment on RB's specifically, but the majority of work its done, has been on crank pulley bolts. I'd measure it up on mine but I have a 52mm KoyoRad, so I'm not sure that'd qualify. Rad out, I would say yes.

Hmm I can't comment on RB's specifically, but the majority of work its done, has been on crank pulley bolts. I'd measure it up on mine but I have a 52mm KoyoRad, so I'm not sure that'd qualify. Rad out, I would say yes.

Awesome news. that's good enough for me to purchase on. Thanks.

  • Like 1
  • 3 weeks later...

Perhaps not something that's up everyones ally, but i've found this quite handy. It's a test light that displays voltage on a lcd screen. It shows reverse polarity with bright led's, red for positive and green for negative/earth. The lcd is crisp and easy to read. There's plently of length too. The only drawback is that it inly does 12v. So I still have to use my older style test light when working on trucks etc. Although not everyone would require this.

Posted Image

Posted Image

Posted Image

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So many people don't notice it, as batteries decay slowly over time. Two big reasons people end up noticing and needing to replace batteries: 1) The cold weather. The cold not only makes it harder to turn the engine for a few reasons, but it also increases the batteries internal resistance. So this means you need MORE power to turn a colder engine, AND the battery has a lower limit on how much current it can provide. 2) Something gets modified/altered/added in the wiring, typically an aftermarket accessory, like a dash camera, or an alarm etc, and this adds a small amount extra onto the battery, and pushes it over the edge in its failing days. But if you hadn't have read this thread, and just pushed through, chances are you might have made it through this winter, just. But come next winter, it would have been kapoot. But the fact you changed it out now, means you've instantly noticed how much nicer it is for starting, and will be less worry for you that the engine won't start now.
    • Holy shit, I'm glad you brought up the battery issue and I'm glad I asked about measuring it. Old battery was at a healthy 12.82V in the morning with the car turned off. Removed the fuel pump fuse, clamped the multimeter on at min/max/average and cranked for ~3 seconds. It dropped down to 8.30V. So yeah, not surprising it struggled that much. Picked up a fresh battery from supercheap and it's ridiculous. Haven't done a cold start yet, but man, even with a warm start the difference is night and day. I can't believe I lived with this for so long. Just blamed it on it being an old modified car. Went with Century because convenient. If they are shit it'll be a future me problem. But just in case I set up a reminder for 30 months - 8 weeks to check on the battery state and get a warranty replacement if necessary. 
    • There's another sensor that sits inside the evaporator, that's a C U N T to get to, but can be done without removing the entire unit. Usually it's not the sensor that dies but the actual capacitor in the circuit (part of the plug that dies).  
    • Putting the climate control CU into diagnostic mode is independent of the ECU. You just have to do the dance prescribed in the manual. No, I do not know what the dance is. I have an R32, so use the dance in the R32 manual. On older cars, I would have said "no, the ECU should not affect whether the A/C works".... but for an R34 that might be wrong. I don't recall the detail, but there was extra mods required to make my R32 A/C work against the R34 ECU. The R34 ECU apparently gets involved in the running of the A/C more than earlier cars did. Theoretically, if the PFC is a true plug in, then it should just work the way that the original ECU does - wrt A/C. But there's always scope for them to have not cared. Nope. Pressure switch out = getting the fridgey out to pump the gas out before pulling the switch. The switch really cannot sense gas pressure unless it is up against the gas.
×
×
  • Create New...