Jump to content
SAU Community

Nismo Lmgt4 Wheels With Bridgestone Re55 Semi Slicks

Nasti
 Share

Recommended Posts

Nasti Contributor

Nasti

Posted
Posted (edited)

I have decided to sell my much loved Nismo Lmgt4s with Bridgestone Re55s that I have only owned for a couple of weeks as I unexpectedly have to go overseas and need to $$$$$, this is an extremely regretful sale and I know when I'm overseas I am going to be kicking myself to know that I will be coming home to stockies with standard passenger tyres :D , but, unfortunately for me this is my only option, 1 mans loss is another mans gain.

4x Authentic Nismo Lmgt4s made by Rays

Wheel diameter = 17"

Wheel width = 9.5"

Wheel offset = +12

4x Authentic Bridgestone Re55 semi slicks

Tyre size = 255/40/17

This package is in very good condition with some minor light marks on the outside edges of the rim.

1 piece Forged Monobloc - extremely light. - Tyres have plenty of tread left

This wheel and tyre combo is arguably the best in its category and is the perfect GTR offset.

I am asking $2300 for the lot and will consider offers.

Shoot me a pm or sms with any questions

Josh - 0404 252 695

Edited by Nasti

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      Is the 650rpm idle on the rb25det neo for stock cars only? I've never had my car before and after tuning it to idle at 650rpm when cold. Always idle's cold around 1100rpm, and then drops to about 900-950rpm. I've heard the r33 gtst's idle there. 
    • redzed
      RB25DET 5 speed gearbox, Cusco Super Single clutch, RB26DETT standard cams in/ex, HDI GT2 intercooler

      By redzed · Posted

      Series 1 RB25DET 5 speed gearbox, push type, 1st and 2nd gear syncros worn, may need bearings. Comes with quick shift, Tomei gear knob, release fork, bearing carrier, master and slave cylinder. $850. Cusco Super Single clutch,assembly, 225mm, used, comes with a Direct Clutch solid centre 5 puck ceramic clutch plate. $290. RB26 cams used, excellent condition. $280. HDI GT2 intercooler, excellent condition, has 3 inch piping welded to inlet and outlet. $250. All items located in South Eastern Melbourne. Please PM me if interested.
    • Sleepergm
      Changing to titanium muffler tips

      By Sleepergm · Posted

      Hi all, I’m currently running a str pipe hi low hks exhaust and downpipe. Was wondering if I change out muffler to a titanium one will it change the sound of the exhaust? Plus I have always liked the look of the titanium pipes … anyone have recommendations to one?    side note already have titanium intake pipes. 
    • Skip33
      Series 2 R33 GTS25T?

      By Skip33 · Posted

      I looked up my other car that is a R33 GTST series 1.5. Anyone able to confirm what a Aero Form Bumper is?     (1G) 2 Door Coupe; (2GK + 11V) RB25DET; (4B) 2WD HICAS; (7F) 5 Speed Manual; (14G) Super Fine Hard Coat; (15U) Large Rear Spoiler + Aero Form Bumper + Rear Wiper (Aero Selection)
    • Shoota_77
      Car Rotisserie

      By Shoota_77 · Posted

      Ha ha, all good! I've almost caved in and realised I'm buying one.  I know myself well enough by now that I will start chasing ADHD butterflies half way through building it and not finish it so I'm better off spending the extra money buying one instead of making one just so I can get into straight away.  I would very much enjoy making one as fabrication is probably a strength and definitely a passion but I don't want that to be at the detriment to the car I'm ultimately building it for! There's some pretty good ones around for ~$1100 at the moment so I think I'll just go that way.  At the end I sell it or as mentioned, get another project to make further use of it! Thanks gents.  
×
×
  • Create New...