Jump to content
SAU Community

Recommended Posts

Found this. Not sure if you have already seen it but i'm just spreading the love.

Queensland residents draw to the attention of the House the Government's proposal to double the cost of Queensland Drivers Licences to more than $150, making Queensland licences the most expensive in the Nation. These changes, along with hikes in vehicle registration costs, the new State fuel tax, and above CPI increases for tolls make Queensland the most expensive State in Australia to be a motorist.

Your petitioners, therefore, request the House to oppose this massive increase in Queensland Drivers Licence charges.

Here's the link to the petition.

$150 licence cost NO WAY

Apparently it is open to only Queensland drivers. So Karn you good things and get behind it!

Its all tax deductable. :banana::(:)
If its tax deductable, does it matter?

ALSO, how many years does $150 get you?

I think its only tax deductable if you are a b*stard like Tony and get to deduct all your car expenses (depends on your occupation).

$150 is for 5 years AFAIK.

politicians, they lie, they cheat, they suck, they take your money...

/end lesson in life

Truth.

NSW licence for 5 years is around $151... sucks that QLD is raising the price on everything motor related... that's what happens when state governments get the taste of money and become greedy!

I just renewed mine for 5 years.. perfect timing before moving back to NSW in a few months lol

Anywho, while I'm still an official QLD Resident, petition signed!

Found this. Not sure if you have already seen it but i'm just spreading the love.

Queensland residents draw to the attention of the House the Government's proposal to double the cost of Queensland Drivers Licences to more than $150, making Queensland licences the most expensive in the Nation. These changes, along with hikes in vehicle registration costs, the new State fuel tax, and above CPI increases for tolls make Queensland the most expensive State in Australia to be a motorist.

Your petitioners, therefore, request the House to oppose this massive increase in Queensland Drivers Licence charges.

Here's the link to the petition.

$150 licence cost NO WAY

Apparently it is open to only Queensland drivers. So Karn you good things and get behind it!

this is incorrect as someone pointed out below. we will be on par with some other states. NSW is $151 (as posted earlier), and from what i could find SA is also $150 a year.

the way things are going they will have to rename this state to the whinging state. i'm not going to bother signing because like anything involving the government (any government, not just QLD's), it doesn't matter whether we like it or not they will do what they want. also because i refuse to sign a petition where the person starting it doesn't even do the research to see if what they are saying is correct (saying that qld will be the most expensive when it isn't).

I'm also not signing.. only cause it's $30.00 a year.. not a great deal of money really.. Especially when you look at what our cars cost to run..

And most importantly, if they didn't take it from one source, they'll just get our money through another means..

I'm also not signing.. only cause it's $30.00 a year.. not a great deal of money really.. Especially when you look at what our cars cost to run..

And most importantly, if they didn't take it from one source, they'll just get our money through another means..

exactly. that's like how people say that they should get rid of the tax on fuel. well if they did then there's a few hundred million dollars less tax that they would then have to get off us by increasing the tax on something else, so at the end of the day you'd still be paying out just as much in tax.

So for those who dont have a house;

* rates up

* water up

* elec up

* insurance up (big time)

* foxtel up (bastards)

* interwebs (steady, yee haa)

* hot dogs up

* frozen fish fillets up (by like 40cents)

* 70 year old men taking Vigria up

* 6 miners killed in the congo up on last year

Its life i guess, everything's going up...

Sory to high jack thread and make it silly, but i felt silly this morning... :P

So for those who dont have a house;

* rates up

* water up

* elec up

* insurance up (big time)

* foxtel up (bastards)

* interwebs (steady, yee haa)

* hot dogs up

* frozen fish fillets up (by like 40cents)

* 70 year old men taking Vigria up

* 6 miners killed in the congo up on last year

Its life i guess, everything's going up...

Sory to high jack thread and make it silly, but i felt silly this morning... :cool:

Mine went up today. Checked this morning. 120GB - 60/60.

checked 20 min ago, 140gb - 70/70

i <3 iinet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wouldn't be concerned at all, other than to suggest having them flow tested when you receive them to confirm they are reasonably similar, and then put the highest to lowest flowing ones in cylinder 6,1,5,2,4,3
    • I’m only posting this cause I thought I had seen a bad review on these somewhere before. Any feedback? Would you guys recommend that if I do buy these I send em to RC to have em checked before installing. Or any other suggestions?   https://www.ebay.com/itm/114009965865?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=JDl-15yLQ8C&sssrc=4429486&ssuid=QTzlFXB1S-S&var=&widget_ver=artemis&media=COPY
    • They see me rollin' they hatin'....... Took me most of the day to make the necessary mods to the mounts to make them fit the car.  Fortunately I was able to just use the mounts that came with the rotisserie. The rear ones are really secure, the front I feel i might reinforce a bit more as it doesn't seem like enough attachment to the vehicle. I'm sure it's fine but better to be safe than (extremely...) sorry.  I drilled and tapped thread into additional M12 holes to each car mount where it attaches to the rotisserie as an extra fail-safe. Without them the side to side movement is just restricted by the allen head pinch bolts, nothing actually goes though the beam. Does now! I still need to adjust the rotisserie to get the car centred in terms of centre of gravity. If it's too high or too low relative to the rotational centre line of the car, it will be like a turtle and roll onto its back or as it currently sits, I dont think I'd be able to rotate it as it sits as it needs to lift the whole car up as it rotates. Ain't happening... I'm going to be nervous as hell the first time I go to spin it on its side...    
    • Oh yes done this when the window started flopping around.  Turns out the guides that run along the rail chanel had crumbed way. Took off the door card and pulled out the window mech, then the window, which you have to pull out through the top. As said unbolt the guide rail and don't spend 30 minutes getting frustrated trying to find a way to slide it out upwards cause that don't frigging work. Drop it down and out through the door hole. All I did to repair it was slice some 10mm clear plastic tube, vertically, then screw it to the guide rail both sides. This tubing rolls inward on both sides and leaves a gap wide enough to hold the window. To finish all I did was lube the plastic tube with olive oil and Bob's your uncle . . . well if he has the operation he can be your Aunt ! !  10 bucks in plastic tube and another 5 minute job done again . . . . YEH BULLSH#T ! My love for Skylines knows no bounds !
    • So was there a solution to this problem? I’m having this issue now. 
×
×
  • Create New...