Jump to content
SAU Community

Recommended Posts

I have joined the yellow sticker club :Oops:

Went through a booze bus in Williams Rd, Toorak - was asked to wait at the end of the queue by the blue XR6 TMU candy-car. I blew a big fat 0 on the breath-test BTW.

They did inspection (I was the only car to be stopped). Pods OK as they are caged and secure. Intercooler OK as it is standard. Blow-offs OK as they are standard. Ride-height, rim size, gauge mounting, exhaust noise... all OK.

EPA letter coming as I have an EBC. Thanks for that.

Better check my cat is working OK :rolleyes:

But oh. What's this...

My new tyres (Sumitomos - less than 5,00km old) have a weight compliance index of 93. The ADR compliance for a GTR says they need to be 94. That and my steering wheel doesn't have a padded centre.

I went to Bob Jane this morning (who recommended, supplied and fitted the tyres) who were very apologetic - and hadn't EVER had this come up before. A look on their catalogue showed all 265/35/18 tyres are rated at 93. Even $750 a corner P-Zeros.

While we were looking, the officer who booked me popped in to check and see if he was correct in his findings? Seems that the 93 rating is very high - why the car required 94 he wasn't sure. Too late for me though - got my defect sticker.

Seems that the only way to get 94 or greater rated tyres is to change sizes, which then compromises the factory-stated rolling diameter, which could lead to rubbing on the guards at full-lock - DEFECT, or not complying to the vehicle standard (upsetting speedo readout etc) - DEFECT. Glad to see these laws have been well and truly thought out.

So... Bob Jane have admitted fault and are going to replace my tyres as soon as they find something suitable. Either way - my car has to be off the road after Friday arvo (they only gave me 3-days to fix). So I'm a bit annoyed.

Something to be aware of I guess...

Oh - and my Momo Millenium wheel never came with a centre-pad and is ADR compliant. I have a legal notice from Auto-Tek (Momo distrubutor) stating so. They also have NEVER had this come up before.

What a waste of time.

Out of interest - what weight rating do people have on their tyres? What does the sticker (drivers door-jamb) say is required. Am I just using an unlucky rim size?

Worth noting too - that I still recommend Bob Jane in Prahran. They've been very good about this. Even the cop was surprised - that's where they take their cars.

Link to comment
https://www.sau.com.au/forums/topic/32555-a-defect-for-defects-sake/
Share on other sites

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Yeah, its about time a few of these common things are thrown out, because most of the time they're not actually illegal - and therefore invalid defect which you *shouldn't* be paying.

When you get it all cleared Jamez, you should write a note to the police superintendant or something. Clearly you have *evidence* to suggest ADR items are being defected and that it neeeds to be passed down the chain of command that "padded steering wheel" and the good old "h pattern not displayed" are complete rubbish and NOBODY should be getting defected for these items.

Weight rating? ha, i barely know what it even is! and i don't think i *have* any stickers on my door jambs anymore, funny that..

FYI James mine are 65 - but they are 265/45/18 not 35's. No idea of what the requirement is.

Sounds like you got someone that had just finished reading the complete rule book on legal requirements and wanted to impress someone with his knowledge!

i drove past that boose station going the opposite direction going home after a yarra blvd run....

i crapped my dacks as all the cops followed my car with their eyes, one of em radioing something into his mic

just hope he wasnt taking my details down for an EPA letter :) i was going "suspciously" slow and whats worse is it was uphill :rolleyes:

Cheers guys.

Snowman: Thanks for that. What brand are yours? Not sure if a 45 profile will be too tall though.

GTT-R: Mine are 650kg. Every other 265/35/18 is 650kg. So silly.

James: Was I there when you went past? Was about 9.00pm

I asked him about how to get the defect removed for the steering wheel - he said to show the Momo catalogue to VicRoads to show it never was padded, and I'll be fine. So why defect me on it in the first place? To prove what? Such a waste of time.

Worst thing is the sticker. So embarrasing having it on the car - especially for something I didn't really do. I bought new tyres - even had an alignment last week. I would have assumed they were OK...

  Quote
Worst thing is the sticker. So embarrasing having it on the car

With the rate the tmu cops hand out these things you usually see a few car with the yellow sticker around the street so everyone is used to seing them on imports and know its usually for bs anyway

  Quote
Oh - and my Momo Millenium wheel never came with a centre-pad and is ADR compliant. I have a legal notice from Auto-Tek (Momo distrubutor) stating so.

They may be referring to the fact that yor car is supposed to have an airbag in the steering wheel.

  Quote
EPA letter coming as I have an EBC. Thanks for that.  

Better check my cat is working OK

Hopefully it will just for the noise and not for the emissions.

FYI, a full factory exhaust doesn't pass the EPA niose test.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • my catch can is pretty easy to empty but it overflows due to the blowby/crank case pressure etc. max I have drained is ~600ml even with a ~2.3L capacity. So it is not just about having to drain it out its the mess it makes down the firewall and under the car and rear passenger tyre from the overflow oil being blasted by screamer + air in general. Ending up on the ground cleaning the oil up and having oil on your arms when everyone else can chill and watch the other sessions gets old fast
    • Yeah - the secret learned a long time ago is that the RB likes to belch oil out the covers, and/or starve the pump because it drowns the head in oil, because the upflow of crankcase gases from piston blowby comes up through the oil drain holes in the block and prevents the oil from flowing back down. The external vents from sump are about creating an alternative path/much more XS area for gas flow to decrease the gas velocity up through the oil drains and allow the oil to get back down. So, it's not about pressure at all. It is about flows - gas up and oil down - or when it's not working, gas up and oil not going where it is supposed to after it arrives at the top, except out through the cam cover vents. And regardless of whether the catch can is vented to air or vented to the turbo inlet, it must still be vented because a sealed system would blow out the crank seals, or something equally bad.
    • I just used a can that's easy to empty after every session and pour it back into the fill hole. Takes about 40 seconds when you have 40 minutes between runs :p I don't see how changing any catch can stuff will reduce pressure if the system is sealed. And if it's vented - Does it matter where it's vented with regards to overall pressure?
    • Welp, too late already committed to the cam cover breathers to be welded on. I did think about adding a catch can in line with the drivers side sump breather as a phase 2 along with a drain to the sump on the original catch can but with an inline ball valve so I can have it closed if needed.    Likely a single breather would have been enough but I think I’m overcompensating to hopefully not have to empty my catch can and clean up oil over flow every session.    out of curiosity has anyone actually measured crank case pressure before and after various mods? I’m considering adding a sensor for science 
    • Is it a dog or synchro box? I guess either way, if it is new and crunching in one gear only, it has to come out and go back to the shop to check/measure as there is either an assembly or manufacturing issue
×
×
  • Create New...