M35's Wheels. What Wheels Do You Like On Your M35?

[sr_1600]

Yes they do , I think 20s would be the best to fill guards ,

Or 40 profileon the 19s and more low,

Nope it's a full kenstyle kit

[Daleo]

http://photos-f.ak.fbcdn.net/hphotos-ak-snc6/190611_1943516947317_1224295443_4398956_8279466_n.jpg

This is my Gf stagea as it sits at the moment

There weds kranze cerberus ii in 19s

Width I'm unsure as the same as ofset ,

Tires are 19/235 35 on the front

And 19/265 35 on rear , tires are also look fairly stretched,

Looking the goods there!

I'd be willing to bet those staggered tyre sizes are the root of you driveline shudder.

They're a no go on these cars...

[sr_1600]

Oh really?? Ahhhhh

What is a good preferred size?

[Daleo]

Size is up to you, but they have to be the same sizes front and rear.

Even theoretically perfectly matched rolling dia staggered sets seem to cause issues with the ATESSA system.

If you can; fit a set of matching dia wheels/tyres, and see what happens.

[impul535w]

Size is up to you, but they have to be the same sizes front and rear.

Even theoretically perfectly matched rolling dia staggered sets seem to cause issues with the ATESSA system.

If you can; fit a set of matching dia wheels/tyres, and see what happens.

I always found this a little strange, by this reasoning adjusting the camber on a car, even if its not by choice (lowering) would change the amount of tyre contacting the road and thus change the width and more than likely the rolling diameter ever so slightly...

I have also seen plenty of GTR's running staggered widths in the past, is there something about our cars that makes this an impossibility?

Mike.

[jasevr4]

I always found this a little strange, by this reasoning adjusting the camber on a car, even if its not by choice (lowering) would change the amount of tyre contacting the road and thus change the width and more than likely the rolling diameter ever so slightly...

I have also seen plenty of GTR's running staggered widths in the past, is there something about our cars that makes this an impossibility?

Mike.

I have to say I agree. GTR's seem to get away with it fine, I've even seen Evos with 9.5" wide rims front, and 9" rear, albeit with the same size tyres (apparently gives better grip through corners), but when I had slightly different tyres on my C34 Stagea, it "bucked" from the get go. I won't be trying it on my M35..

[sr_1600]

So looks like she will have to get some new wheels then,

She loves the weds too,

Hmmm what to suggest her to get???

[sr_1600]

Will test another set before hand tho, but doing a lil googling has come to this conclusion

[jidge]

Here's my new wheels

20X8.5" not sure of the offset LOL

Hey Wagon boy, looking nice! Did you get the wing fitted after or was it already there?

[Daleo]

Hey Wagon boy, looking nice! Did you get the wing fitted after or was it already there?

He already had it; but he's just minding for me until Sunday...

Bloody Nismo; why can't they just make something that I DON'T want?

[jidge]

Most wings are "not suitable for ARX" is this correct?

[bigkevracer]

I can't see why it would. My Nismo wing just screws into the back hatch, where the two black tabs are.

[jasevr4]

I can't see why it would. My Nismo wing just screws into the back hatch, where the two black tabs are.

Yours painted yet? $150 at All Type Crash...

[iamhe77]

Most wings are "not suitable for ARX" is this correct?

No.

All Nismo add-ons state "not suitable for ARX" for some reason, even though you can fit the speedo, suspension, exhaust, wing etc just the same as with an RS or RX.

Where there is a bit of a problem is with front and rear bumpers and side skirts due to the ARX and Axis flares.

[jidge]

Sweet, so I CAN get one.

I will add it to the list of things I have to convince the Mrs I need more than a bigger house!

[stagman]

Will the M35 spit the dummy if i run 8 inch front and 9 inch rears, both 19 inch? Plan on running run the same size tyre all round.

Cheers

[joshm35]

If rolling diameter is the same I dont see why not

[joshm35]

I like koya inox black with chrome lip in 19 x 9.5 +25

[PN-Mad]

Is the rolling diameter the same? It's a question I have heard debated back and forward several times.

Someone with a tape and this type of setup care to share?

[gleeson]

I'm about to get my ox111 in silver 20 x 8.5+35 in the next 2 weeks.Very excite!