Jump to content
SAU Community

Fuel Regulator And A Yellow

Romain

By Romain,
in Western Australia

 Share

Recommended Posts

Romain Rookie

Romain

Posted
Posted

Hello everyone

I have got a yellow last Sunday and this week I have been searching for all relevant info about passing the pits. Some problems came across.. any1 could tell me what to do about this?

Currently the fuel regulator is leaking. I did made sure the hoses are tighten, and noticed that the petrol is leaking from the spot (in red circle) Does that mean the regulator is broken? It is a sard one btw.

post-69413-1277037770_thumb.jpg

And this is the further look of the fuel regulator

post-69413-1277037859_thumb.jpg

Other mods on my car

custom stainless intake

K+N pod

Tein super street suspension (The ride height is pretty low now, and I gonna ask the work shop to adjust for me)

blitz boost gauge mounted in a mearcat pillar ( this gauge will hide )

greddy profec b electronic boost controller ( this is already hide )

nismo 740cc injectors

sard fuel reg

tomei fuel pump

tomei poncams

Trust TD06 -25g turbo

Trust oil cooler(braided hoses + earls fittings)

Front mount intercooler ( without chopping the reo bar )

Wolf3d v4 ecu

Turbosmart Bov ( I think have to replace the standard one?)

Tial 38mm wastegate ( It is plum back to the exhaust )

Nismo Clutch

Custom exhaust with high flow cat ( read about the forum and confirm the highflow cat is illegal? )

and picture of the engine bay

post-69413-1277038257_thumb.jpg

I have no idea what to do at the moment. Seems like lot of parts have to change back to Original.

Just want to gain more opinions before I send my car to work shop and do it up.

and a silly question. Do I have 10 days to prepare for pit since my car defected? does it include Saturday and Sunday?

Cheers

Romain :P

Link to comment
https://www.sau.com.au/forums/topic/325678-fuel-regulator-and-a-yellow/
Share on other sites
Hanaldo Grand Master

Hanaldo

Posted
Posted
answer ur question abt the sard reg.. i would say just re-tape with teflon tape and tighten it up..... and i think in general coilovers are illegal??

Adjustable coilovers are illegal if they are threaded.

ossie_21 Grand Master

ossie_21

Posted
Posted

10 consecutive days yes lol

Coilovers technically are illegal, but as long as they aren't too soft most inspectors are fine with them...but it all depends, they aren't consistent. Your engine bay looks pretty clean & tidy so they should be happy with it, the bov you will have to take off, the cat should also be ok, at least I don't think any rules have been changed with that except for the emissions part they might ask you to get done. The IM240 test is still on hold at least....but if you have access to a stock cat you may as well put it on anyway

3LGODZILA Proficient

3LGODZILA

Posted
Posted

hey man if its not too hard do u mind posting up some pics of how your fpr is all hooked up? ive got what looks like an identical sard one but with only 1 airline fitting and 2 fuel fittings (purchased 2nd hand). and i always thought an adjustable fpr would replace the standard one it looks like yours is running in series with it.

cheers bud

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Help Understand GTT Boost Setup

      By joshuaho96 · Posted

      Save yourself the headache of an alarm. Immobilizer on the signal side of the main EFI relays so it won't start is good enough. DIY killswitch is the same thing except instead of a nice passive system you need to remember to switch it on and off.
    • GTSBoy
      Help Understand GTT Boost Setup

      By GTSBoy · Posted

      Yeah, the advent of canbus was supposed to cut down on wiring weight, then some bright marketing wonk says "oh, look at all these wonderful tech gadgets we can cram in here now that we have this wonderous technology" and some arsehole safety legislator says "oh, look at all the wonderful surveillance and tracking gadgets we can cram in here now that we have this wonderous technology" and some dipshit young engineer who has grown up thinking that an extra 500000 lines of code is not a problem because storage is cheap these days says "oh look at all this wonderful shit I can do to one up those dipshit arsholes over at VW" and the Karens of the world all go "oh look at all these fancy things I can do on my screen (so long as I am not driving on a bumpy road wherein touch screens immediately become the single most stupid shit idea ever shoveled into a car) and my 19 zone airconditioning keeps my sweaty fat folds a bit less damp and the windows close themselves because I'm too fat and lazy to wind them up for myself and these reversing sensors would have been great if I'd paid attention to them instead of smashing them on the bollard while I was reversing and staring fixedly forward that day I went to pick up little Charlize from ballet" and the sweaty mongoloids who say "oh this wonderful collision avoidance technology with these 45 excellent radar antennae scattered across the front of my car mean I can tailgate like a methed up tradie at full speed with no fear because the car and the 35 airbags will protect me if it all goes wrong" ...... </shallistopranting?>
    • Dose Pipe Sutututu
      Help Understand GTT Boost Setup

      By Dose Pipe Sutututu · Posted

      There's a post from a member (can't recall who), went down the path of a twin scroll G30-660 and it's doing over 300kW+ AND comes on about the same as a high flow RB25DET turbo. Have your cake and eat it too in this case. TBH, if I had a 2nd chance of building my car again (i.e. someone gave me what I wanted for my shit box, but the deal was I had to re-build another R33 and keep the change) I would just pop in a stock NEO motor (with new seals, rod bearings, ARP studs, head gasket, sump, Nitto pump), get a smaller twin scroll turbo, modify the stock low mount (keep the divider in place), and make a solid 300kW on 98RON and call it a day. 
    • MBS206
      Help Understand GTT Boost Setup

      By MBS206 · Posted

      It's all the sound deadening, and extra shit piled into them, plus all the extra (even though it's thinner) material for crumple zones. I can't fathom in modern cars why they need canbus to the headlights, and why the headlights must be vin coded on some cars to the ECU, BCM, and security module! Especially when they claim it's for security, yet, the canbus at the headlights let's thieves steal the car in minutes, so even more cars are being stolen! The Mercedes Sprinter 907 vans. They're a huge van, but a "basic" van. Yet they have that many canbus networks, plus two Lin networks, AND an Ethernet network. Logging a single network alone of 8 byte data frames, and they will generate a 20mb log file in 5 minutes. That's one network, and I can't remember the exact amount, but there's over 10 full CAN2.0B networks in them. I'm not a fan of modern cars, oddly, more and more I hate DBW, and all the bullshittery the cars try and interfere with. But all that bullshittery adds weight, plus crazy regulations on crumple zones, plus, ever picked a modern seat up, half of them have like 4 electric motors in them and will weigh 30+kg each. Then all the motors for things like adjustable steering columns blah blah blah. And did I mention the sound deadening so you can even hear an ambulance right behind you even if you 7.2surround sound is off?
    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      Ah ok, yeah it should be flat, I believe the r34 battery tray has these 3 bumps in them they makes it line up and everything is flat, don't see how it would tilt if everything is secured.
×
×
  • Create New...