Jump to content
SAU Community

Got My Tune Done On A New Highflow - Very Happy

geraus

By geraus,
in Engines & Forced Induction

 Share

Recommended Posts

geraus Mentor

geraus

Posted
Posted

Hi guys well i got my tune done and im very very very very impressed! This turbo pulls so hard im always stuck to my bloody seat, I got what i wanted, i wanted 251kws at 18psi that was my goal for drifting at the track. This turbo is capable of doing 280kws, Toa from hypegear has the same mods as me with this turbo and he got 300kws+, but i didnt want that! my mods are the usual... Power FC,FMIC,Pod,Stock BOV,splirtfires coils,etc... Thanks to Tao from hypegears and Trent for tunning my car!!

here are some graphs.

geraus1.th.jpg

Uploaded with ImageShack.us

gerausboost.th.jpg

Uploaded with ImageShack.us

geraus Mentor

geraus

Posted
  • Author
Posted

its and adjustable actuator 1.4bar one i think, but my greddy profec spec b-II is connected to it... its not doing much.. lol.

With this highflow, it can do 280+ .... .63 raear housing.

boostn0199 Grand Master

boostn0199

Posted
Posted

Good result there should have some fun now, and yes you will get sick of it and want more ahaha im on 270 for a couple of weeks and am bored now.

300+ from a highflow? with what housings?

good result, looks a little late onto boost tho, what b/c you using?

Its not late onto boost thats just how it is because its a 3576 hi flow, its about right from the estimation Stao gave before on when it hits full boost.

R31Nismoid Grand Master

R31Nismoid

Posted
Posted
300+ from a highflow? with what housings?

good result, looks a little late onto boost tho, what b/c you using?

Agreed, even with a .63 it should be earlier. GT30's with .82's are on about that (and make 280rwkw/17-18psi)

Not sure how it's going to crack 300rwkw if its 18psi/250rwkw... It's clearly showing a fair bit of restriction.

Good result either way, just need to ensure you keep the RPM's up a bit higher.

Keep that motor serviced well and a sane rev limits :whistling:

geraus Mentor

geraus

Posted
  • Author
Posted
Agreed, even with a .63 it should be earlier. GT30's with .82's are on about that (and make 280rwkw/17-18psi)

Not sure how it's going to crack 300rwkw if its 18psi/250rwkw... It's clearly showing a fair bit of restriction.

Good result either way, just need to ensure you keep the RPM's up a bit higher.

Keep that motor serviced well and a sane rev limits :thumbsup:

heheh thanks, its always serviced by me with all the good stuff :whistling:

urtwhistle Proficient

urtwhistle

Posted
Posted

ahhh sweet thanks for your graphs, i got the same turbo but in .82 and on a RB30. you have just inspired me to finally pull my finger out and put my cam gears on and fix the timing issues because yours is coming on a fair bit earlier even with the RB25. But damn the bang for buck you get with these turbo's is friggen awsome. did you use a VBAND setup also?? I think 1 suggestion for stao would be for them to use a 3" VBAND instead of the 2.5".

Chris

STATUS Grand Master

STATUS

Posted
Posted
id be playing with your boost control man, my cheapy kkr430 /dsr430 makes 14psi @ 3500rpm , actuator setup to open @ 9psi, gain @ 50%, alot of preload on the internal wastegate.

different turbo, this high flow has a very open rear wheel so the 0.63 does'nt choke it. There is no more respone to be had with a controller or preload... we tried. This turbo with around 20psi will crack the 280-295 rkw no issues.

That should be obvious just looking at the boost graph, any more preload and it will spike too much.

urtwhistle Proficient

urtwhistle

Posted
Posted

ah sorry mate I just re read that yours has been put into a highflow. Thats awsome, mine is a complete new turbo that Stao made up for me. V band is like a pipe clamp flange on the exhasut housing, instead of using a 6 bolt flange like nissan use on the turbo.

regards

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a huge reason manufacturers are tuning in dead flat torque curves... Make them reliable (and more drive able)
    • GTSBoy
      AC not coming from top vents

      By GTSBoy · Posted

      What HVAC actuator is under the steering wheel? Do you mean on the RHS of the centre console, immediately to the left of your shin? If so, then yes, it is probably that one, because that is the mode door actuator, and from what I know, it's still a pain in the arse to replace. I don't know about whole dash out, but you certainly have to rip into the centre console section. I don't know if it's covered in the workshop manual, as I haven't spent much time looking at those parts of it. (and by "the workshop manual, I mean the R32 GTR one, which is the most comprehensive one we have, and it should be similar enough between that and later cars to serve as a guide).
    • dbm7
      Shifting questions

      By dbm7 · Posted

      ...oops. forgot the TCU end...
    • Sleepergm
      Custom titanium intake

      By Sleepergm · Posted

      No I got mine from a friend that had fabricated one … but I had to fit it to my setup which was a hks turbo setup. His was a Garrett -7. So one of my turbos was not a flange for one side … then I had a leak in the welds I had to find a weld shut … in the end the setup was decent priced but I spent a lot to get it fitted. A couple companies I checked would make it but you’re talking 7-9k aud with titanium. No joke mine was 6-7k even second hand after I had to fit it in Hong Kong … labour is expensive here. 
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I'd just like to restate that I don't think anyone here is actually hating I recently sold a car part to a guy who was building a forged auto R34, with MV stall and aiming at ~450kw. I told him that I'm him, from the future and to stop after it explodes once. I told him I knew he won't listen the first time, and that's fine. But if my predictions do come true - Change direction faster than I did. I also said it's probably no coincidence that the dyno plot of a reliable turbo engine starts to look a lot like a N/A motor. :p
×
×
  • Create New...