Jump to content
SAU Community

Recommended Posts

I'm parting out my GTST, most parts have only recently been installed and are basically new. I just don't have the time and patience for the car anymore so its all gotta go.

The long motor was purchased stock from a local import wrecker and has good compression on all cylinders, no leaks and ran well 2 weeks ago when i started it but i've got no idea how many k's are on it im guessing just over 100,000 since the timing belt i replaced looked fairly new. Cams, headgasket, timing gear was all done recently the bottom end hasnt been touched but the bores and pistons looked schmick when i had the head off.

GT35R .82 rear housing, 6Boost Manfold with black ceramic coating, Synapse 40mm Syncronic Wastegate, Water/Oil lines and HKS Bellmouth (no dump or cooler piping, only test run on the motor for 10mins tops) - $3000

RB25 Long motor with tomei pon-cams, acl race series mls head gasket, gates racing timing belt and new tensioner, greddy knock off plenum and VH45 Throttle Body (will include top feed injector setup with 650cc siemens deka injectors and aeromotive a1000 fpr for an extra $500, no ac or ps pump) - $2500

RB25 Complete Manual conversion (has exedy heavy duty clutch thats fairly worn although it didn't slip with the old motor at ~350rwhp) - $1250

BC BR Coilovers, HI-CAS Lock bar and Rear camber adjustment bars (only just been installed in the car haven't driven the car with them yet) - $1400

Haltech Platinum pro r32/r33 plugin ecu with extension harness, couple of marks on case but barely used - $1700

Clear side repeaters - $20

18" 350Z Touring V2 Rims, small marks on 3 rims and decent gutter rash on 1, 1 new tyre and the rest would have over 75% tread. - $500

Bosch 044 and 2.5L surge tank - $200

600x300x100 Intercooler, 3" inlet and outlet - $70

ASI 50mm Alloy rad and twin 12" Thermos - $250

VH45 Throttle Body - $100

Pics:

p7220067jy5.th.jpg

p7220068ru1.th.jpg

17052010006.th.jpg

17052010005.th.jpg

Everything is currently still on the car (if anyone is interested in the whole car lemme know) so if you want pics of certain things ask. The whole car is being parted (except the nitrous gear atm) so if you need something just ask everything has gotta go and i wanna get rid of it all asap so feel free to make sensible offers. Will separate items if i have buyers for everything.

Will add more later this week and get more pics.

Edited by slo_sprint
Link to comment
https://www.sau.com.au/forums/topic/325760-qld-parting-out-black-s15-r33-gts-t/
Share on other sites

I'm parting out my GTST, most parts have only recently been installed and are basically new. I just don't have the time and patience for the car anymore so its all gotta go.

The long motor was purchased stock from a local import wrecker and has good compression on all cylinders, no leaks and ran well 2 weeks ago when i started it but i've got no idea how many k's are on it im guessing just over 100,000 since the timing belt i replaced looked fairly new. Cams, headgasket, timing gear was all done recently the bottom end hasnt been touched but the bores and pistons looked schmick when i had the head off.

GT35R .82 rear housing, 6Boost Manfold with black ceramic coating, Synapse 40mm Syncronic Wastegate, Water/Oil lines and HKS Bellmouth (no dump or cooler piping, only test run on the motor for 10mins tops) - $3000

RB25 Long motor with tomei pon-cams, acl race series mls head gasket, gates racing timing belt and new tensioner, greddy knock off plenum and VH45 Throttle Body (will include top feed injector setup with 650cc siemens deka injectors and aeromotive a1000 fpr for an extra $500, no ac or ps pump) - $2500

RB25 Complete Manual conversion (has exedy heavy duty clutch thats fairly worn although it didn't slip with the old motor at ~350rwhp) - $1250

BC BR Coilovers, HI-CAS Lock bar and Rear camber adjustment bars (only just been installed in the car haven't driven the car with them yet) - $1400

Haltech Platinum pro r32/r33 plugin ecu with extension harness, couple of marks on case but barely used - $1700

Clear side repeaters - $20

18" 350Z Touring V2 Rims, small marks on 3 rims and decent gutter rash on 1, 1 new tyre and the rest would have over 75% tread. - $500

Bosch 044 and 2.5L surge tank - $200

600x300x100 Intercooler, 3" inlet and outlet - $70

ASI 50mm Alloy rad and twin 12" Thermos - $250

VH45 Throttle Body - $100

Pics:

p7220067jy5.th.jpg

p7220068ru1.th.jpg

17052010006.th.jpg

17052010005.th.jpg

Everything is currently still on the car (if anyone is interested in the whole car lemme know) so if you want pics of certain things ask. The whole car is being parted (except the nitrous gear atm) so if you need something just ask everything has gotta go and i wanna get rid of it all asap so feel free to make sensible offers. Will separate items if i have buyers for everything.

Will add more later this week and get more pics.

interested in the 6boost manifold

fuel pump and surge tank

front facing plenum with throttle body

injectors and fpr

intercooler

pm me with best price for the lot

interested in the 6boost manifold

fuel pump and surge tank

front facing plenum with throttle body

injectors and fpr

intercooler

pm me with best price for the lot

Can't PM yet man, just so ya know the manifold has a Tial 2 bolt wastegate flange.

Can do it for $2200 but id like to sell the manifold with the turbo gear together or at least have buyers for all the stuff so i'll let ya know.

Anychance posting to 5173 Adelaide for $30

cheers

Can do

how old are the coilovers any leaks or knocks and spring rates etc?

cheers

Basically brand new, installed them and thats it so no knocks or leaks. Pretty sure the spring rates are 8kg front and 6kg rear.

Fuel pump and surge tank sold!

Better pics of engine in this gallery http://yfrog.com/0aimg0885hjx

pics of throttle body? will you send to wa?

Pics in the link above, will send to w.a. no dramas if you pay postage.

350Z Touring V2 Rims got pics of "decent gutter rash " one? how much to get it to melb?

Pics of all wheels in the link, no idea how much itll cost it'd be too heavy for aus post so i'll leave it up to you to organise shipping.

Edited by slo_sprint
Hi mate,

How much for the greddy plenum and 6boost manifold?

Thanks,

Pete

I'd looking for around $1200 for the manifold and ill take $200 for the plenum but im not willing to separate them yet.

Where abouts are you located? Im interested in the gearbox conversion and radiator?

I'm in Sheldon in QLD man.

One VH45 Throttle body and clear repeaters sold.

C'mon people im wrecking a whole car here, panels, interior, lights, sunroof, suspension everything is up for grabs i need space for the new car.

Engine, turbo kit, ecu and manual conversion listed on ebay and will add more during the week

hey man how much do you want for your front bar and front left lower control arm? and do you still have the intercooler?

Front bar you can have for $30 but its in need of paint pretty bad the lca i dunno like $20?

im keen on the conversion kit.how much to post to melb? how many k's has it done? gimme ur number n i'll give u a buzz. cheers

PM Sent

Long motor with plenum and vh45 tb, turbo gear, intercooler, wheels, fpr injectors and rail all sold

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...