Gts4 Running Rwd

[kyle tha kiwi]

hey guys need some help my mate blew up his engine in his r32 gts4 and to get the car running we have put a rwd rb20det in and i need to block the output for the front drivshaft as i am using the 4wd gbox, the atessa system has the switch in for running rwd or 4wd so theres no problem for having the power go all to the front

my thort is i can pull apart the driveshaft and just put the spline and half the uni joint in but am not too sure how well this will seal and if it could fall out

any assistance on this will be greatly appreciated cheers guys

[KiwiRS4T]

hey guys need some help my mate blew up his engine in his r32 gts4 and to get the car running we have put a rwd rb20det in and i need to block the output for the front drivshaft as i am using the 4wd gbox, the atessa system has the switch in for running rwd or 4wd so theres no problem for having the power go all to the front

my thort is i can pull apart the driveshaft and just put the spline and half the uni joint in but am not too sure how well this will seal and if it could fall out

any assistance on this will be greatly appreciated cheers guys

You can run without the front driveshaft it won't pour oil out.

[lotsalag]

it wont leak if u pull it out and leave it out

why cant u just swap the complete 4wd sump/front diff to the new motor?

[blind_elk]

why cant u just swap the complete 4wd sump/front diff to the new motor?

Because they are different blocks (the skirt, where the sump bolts to, is different), and the sumps don't just swap over.