Jump to content
SAU Community

Recommended Posts

234787rwhp@1psi, comes on hard at 75,000RPM

Haha pretty sure it would be a low rpm diesel turbo or something similar, so probably 4 of those bad boys strapped to an engine making 182821hp @ 600rpm, full boost by 200rpm lol. Pity it would take like 5 hours to rev that high :bunny:

So i think the answer he was looking for was you can get anything as long as you get it engineered and then pasted the said emissions test and then the pits. But what i think he ment was whats the largest snail he can put in his engine and have it look stock, if thats correct i think somethign along the lines of a garrett 3076 can mount low i believe, but there are probably others and it all depends on what you are looking for horsepower wise etc. etc.

A GT30R, lowmounted, isn't going to look stock.. especially with all the custom piping etc.

A highflowed Neo turbo is the biggest "stock looking" turbo setup you could go.. I think they're good for 240-260wkw depending.

A GT30R, lowmounted, isn't going to look stock.. especially with all the custom piping etc.

A highflowed Neo turbo is the biggest "stock looking" turbo setup you could go.. I think they're good for 240-260wkw depending.

290rwkw for a high power one from Hypergear. 260rwkw if you want responsive.

you can get away with a low mount GT30...

had a 3071R in my old car and never got done for it... cops just thought it was the standard turbo... they arent that savy

Wrong state mate :rofl:

290rwkw for a high power one from Hypergear. 260rwkw if you want responsive.

Nice.. I need to fix my VCT because my highflow really isn't very responsive :thumbsup:

Yea I wanted to know what the biggest stock looking one without going on pits, nice replies though haha

If you change your turbo at all then it will need to go over the pits and pass emissions tests. High-flows are your only chance of going over with a chance of passing because they retain the stock housings, and hence they look stock.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...