Jump to content
SAU Community

Recommended Posts

HEY GUYS,

i have an r32 gtr a while ago the alternator died by over charging, now the wipers seem to stay on or blow the fuse?? as well as the aircon/heater only works on flat out and demister?? and passager side door stays lock 24/7?? any help would be great i did search but found nothing

thanks

Link to comment
https://www.sau.com.au/forums/topic/325999-weird-electrical-problems/
Share on other sites

Rus

I'd start by checking All fuses (3 lots), the fuseable links (best done with a multimeter),

I fear if the overcharging was bad some of the 'black' boxes throughout the car might have issues though

OR

you may have some melted wires under the dash (check round the firewall where space is tight and the heat gets traped, behind the stereo/aircon may be worth a look to)

couple of Q's

does the car run OK, ie is the ECU OK

is there anything you can do to make the wipers either:- come on, or blow the fuse. Or is it random

cheers bundy

checked all the fuseable links i could find pulled out dash and it all looks fine

car runs fine no problems at all

as for the wipers the stay on constantly as soon as you start the car and will blow the fuse after 2 or so minutes

thanks

Edited by RUSSMUSS

Did you change the alternator yourself? Or did you use an autoelec?

If you used a sparkie, and all this happened straight afterwards, then...... !!!

ECUs can get touchy like bundy said.

This is a remote chance, but the same thing happened to a guy's car in Canada. When winter cold set in, the mice started to eat not just the birdseed that was stored in his garage, but also the wiring that fed his central heating + his car. No mice in your garage?

Nah! See the sparkie! Although time = $$$, so a mate who's an autoelec?

And when it's all fixed, check out the Event, "R32 GT-R 21st Birthday" and come along eh?

Rus

I'd start with the wipers (cheaper) and swap the brain (black box), I think its under the dash

if that works replace the aircon controls in the dash

sounds like it might be an $$$ journey though

bundy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...