Jump to content
SAU Community

Recommended Posts

Hi guys,

Well I inspected a r32 gts-t sedan today which was in good condition with a standard rb20det and 5stud but auto.. Anyway nothing was said about the car being a gts-4 until i saw the 4wd light on the dash (even had a gts-t badge).. I was pritty unsure about the car after that only cause i want a rwd, can this be taken out? is it worth having a defuser switch? how much more extra weight is it?....

Basically I need some awnsers on the disadvantages and advantages about it gts-ts and gts-4s, any advice would be great..

Thanks..

Link to comment
https://www.sau.com.au/forums/topic/326303-need-help-with-gts-t-or-gts-4/
Share on other sites

r32 gts4 is the 'baby' gtr, the production got axed in r33 because it puts the r33 gts4 too close to the gtr, and so on r33 it is only given an NA engine...

based on that, I'll leave it to you to judge whether you've found a rare gem or a fat pig

I own a gts4 4 door, from memory it weighs about 50kgs more than a gts-t. Seems a bit strange that it is labelled a gts-t. I would check under the car to see if there is a transfer case next to the gearbox, on the right side. Also if the 4wd light is constantly on, that means there is something wrong with the 4wd system. You can read the error codes from the attessa ecu in the boot of the car. If it is a gts4 it should also have the attessa bottle in the right hand side of the boot.

Advantages? Well it does give a bit more traction when you are flooring it, as torque is being diverted to the front wheels and it's not all going to the back.

Making it a bit safer

Disadvantages? More stuff to go wrong and fix.

I own a gts4 4 door, from memory it weighs about 50kgs more than a gts-t. Seems a bit strange that it is labelled a gts-t. I would check under the car to see if there is a transfer case next to the gearbox, on the right side. Also if the 4wd light is constantly on, that means there is something wrong with the 4wd system. You can read the error codes from the attessa ecu in the boot of the car. If it is a gts4 it should also have the attessa bottle in the right hand side of the boot.

Advantages? Well it does give a bit more traction when you are flooring it, as torque is being diverted to the front wheels and it's not all going to the back.

Making it a bit safer

Disadvantages? More stuff to go wrong and fix.

Yepp it had the transfer case next to the box also had the attessa bottle where u said it would be, and i asked why the light comes on, he said when the defuser is off its telling u theirs a prob with the 4wd meaning its switched over to 2wd.. which is a good thing all n all butt like u said about the disadvantages thats the only thing stopping me as im coming from a s12 and s13 and still want a rwd car not that i hate 4wd but i just prefer a rwd car..

This guy should let you read the codes. I don't know what he means about defuser.

If you are still interested in the car, stick your head in the boot and there should be a silver box under the parcel shelf. It has a red led which should be flashing codes in a loop. From memory it will just repeated flash small dashes, and will leave a gap between each code. Probably best to grab a pen and paper for this. You'll know once it's looped.

This should at least tell you what errors the 4wd system is throwing up. Multiples things can go wrong, G sensor, speed sensor, ETS pressure switch etc etc.

The good thing with the 32 4wd system is you can just keep it in 2wd mode by pulling the fuse, so it's no constant 4wd like a 33 or 34.

And if you really want you could probably get a shop to convert the car to rwd, or do that yourself. Just depends on if you think the car is a good deal for what it is.

I'd also check the rear of the car out if it has a gts-t badge on it, might of been in a rear ender and they bought a gts-t boot to replace the stuffed one.

I bought a 4-door gts-t from japan with an RB26 and it turned out to be a gts-4 :P.

I thought it was always a GTS-4? Not sure myself what would need to be done to convert to rwd Best to ask a shop. I think it's mainly change the sump, pull the driveshafts, change the gearbox.

Your 4 door gives me Inspiration Sarumatix ;)

Frankly, if you don't want a car with AWD, then don't buy a car with AWD. Simple as that!

The good thing with the 32 4wd system is you can just keep it in 2wd mode by pulling the fuse, so it's no constant 4wd like a 33 or 34.
Nissan AWD is NOT constant AWD - it is an intelligent AWD system, that runs as RWD until the computer detects a particular condition and switches to AWD mode.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...