Jump to content
SAU Community

Recommended Posts

yo

I’m importing a 97 gts-t skyline spec II type m, I wonder if anyone who has imported before had any problems and/or know of anything I should watch out for? Some of my friends have said the stereo will probably go missing? Seems like some sort of urban myth to me, could the wharf guys really get away with that sort of behavior? Also is it likely it will get dented or scratched while on the ship?

Yeah so any advice, opinion or experience would be greatly appreciated.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/32637-im-importing/
Share on other sites

If it is a good stereo they usually put this anti-theft tape across it. I imported my own car and it had guages and stuff - nothing went missing at all. But other people have had stuff go missing. Your car isnt likely to be dented to scratched - they pack the cars in super tight on the ship, but they are careful. Your car will be pretty dirty as well when is comes in. I have only ever heard of the stuff going missing on the Japan end of things, not from when it arrives in Australia.

As with anything - this is a risk you're taking. I didnt have any problems but other people did... you can look at insurance on the ship... but I am not sure about how that works

Link to comment
https://www.sau.com.au/forums/topic/32637-im-importing/#findComment-654388
Share on other sites

Mine was in a container too....

Good idea if you dont want little stuff to go missing, be prepared for some things like scratches and parts a little different than was you originally thought, some of my stuff was different brands to that I was told and had a few niggling mechanical probs not mentioned

Link to comment
https://www.sau.com.au/forums/topic/32637-im-importing/#findComment-655682
Share on other sites

personal experience:

had car broken into on wharf in japan - door locks ****ed, doors scratched.

needed to get it on a boat - due to the old scheme expiring, and it was sent with no door locks or handles, but the wharf insurance covered the repairs.

locks and handles posted to me from nissan.

somewhere along the way, my car drove an extra 1000km. it had the drivers side floor mat, and gear knob (small but frustrating items) go missing, and the front right 1/4 panel graunched.

on the upside, i found it had an obscure but expensive jap brand exhaust on it and an HKS AFR (budgo version of the afc). plus the rims on it which I thought were nice turned out to be VERY nice.

oh, I also found the car had a bown gasket at the turbo. very expensive OR time consuming job to fix. this could have happenned in between buying the car and shipping it, but eh, I dunno.

at the end of the day it was probably still worth it vs. buying a car from a yard here. would be even more so at the moment with the Aus vs. Yen.

the fact is that, if you're like me, you will probably end up very frustrated and angry at the process and the waiting. just remember the savings and why you're going through it, otherwise you'll be over the car before it gets here.

oh, yeah, having said that, once it's on the road and rolling, all the hassles that spanned over 4 months will roll away into about 10 seconds of memories and you'll love it.

Link to comment
https://www.sau.com.au/forums/topic/32637-im-importing/#findComment-656312
Share on other sites

personal experience:

had car broken into on wharf in japan - door locks ****ed, doors scratched.  

needed to get it on a boat - due to the old scheme expiring, and it was sent with no door locks or handles, but the wharf insurance covered the repairs.

locks and handles posted to me from nissan.

somewhere along the way, my car drove an extra 1000km. it had the drivers side floor mat, and gear knob (small but frustrating items) go missing, and the front right 1/4 panel graunched.

Zanda, Just a FYI.

The only driving that takes place here in Perth is from the Container to the Quarantine wash area and then the yard.

The yard is pretty busy but after having spent some time down there waiting for family to finish work I doubt that extra KM's occured here in Freo.

Link to comment
https://www.sau.com.au/forums/topic/32637-im-importing/#findComment-657064
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha thanks everyone, I'll take everyone's suggestions into consideration. If I do eventually choose a car ill post it here update on the mods I do.
    • I found the ingredients at larger amounts from a Coffee Shop. 1kg Citric Acid for €8.50 500g Baking Soda for €2.50 I tried it out tonight distilled water (I got from my ACs) and dish soap. It does get bubbly with dish soap. In just two hours the hanger has improved significantly and rubbing against any remaining rust seems to flake it off. I'm going to leave it a little bit longer and see how it goes. I have read that someone even used this solution in an ultrasonic cleaner to clean a seized water pump which brought it back to life.
    • If you like more modern stuff than the R series, you should check out a V37 400R, they are pretty mod friendly
    • Haha luckily we don't have emissions, inspections, or any laws against power adders here. They only thing they somewhat keep an eye out for are ridiculously loud exhausts. 
    • Just wanted to pop in an update on my setup. The CD swap has been great, I love the mazworks housing for the overall simplicity. I ended up sealing my trans tunnel with a thin sheet of aluminum reused some of the holes on the trans tunnel, and laid some window sealing EPS foam around the edges. Works great, really quieted things down and sealed up the car.  As for the power comment. Right now I am also running about 650whp. with the way the bell housing is attached to the face of the transmission I have zero doubts it would be fine, mainly because the input shaft and main shaft bearings are seated into the bell housing adapter. This means the load is NOT on the bolts to maintain the power, rather into he casing of the bell housing; Yes the bolts are doing some work there, but with both shafts locked in zero worries.  End of the day, the Mazworks solution is the easiest and safest. no need to take your trans to a shop to get milled perfectly, it fits with minimal clearancing, and you can use all your existing clutch and flywheel.  Driving wise the CD has been great compared to the big box, I'll probably swap my final drive at some point. The serial 9 shifter is gooooood, my only qualm is how tight it is, it takes a fair bit to get use to, 5th and 6th are a bit eh/hard to find at times, but maybe I need re-adjusting, and I think my clutch master is very tired and needs a rebuild. 
×
×
  • Create New...