Jump to content
SAU Community

Recommended Posts

Hi folks, I have a fairly mild R33. Mods are limited to a full 3inch catback exhaust, std airbox with custom ram air scoop and BMC filter as well as an R34 intercooler.

I plan to doing the free boost mod in the short term to get 7-8psi the whole time. (maybe 9-10 given my supporting mods?)

Will the std fuel pump flow enough for this setup or will it need to be upgraded? If so what is the reommended part numbers?

My current fuel pump appears in good nick, not noisy, and the car does not appear to be running out of fiel up top, pulls strong and no missing or running issues.

Thanks

Jason

it will be fine to around 230rwkw from memory.... you could/should replace it if you want piece of mind as fuel is very very important and it will be 15 years old by now

If it ain't broke don't fix it doesn't apply to old fuel pumps. If it leans out or fails at high revs bang goes your motor. There is a Walbro with the skyline fitting kit:

http://www.nzperformance.co.nz/store/walbr...mp/prod_80.html

or the Bosch 040 in tank.

i had a strange miss at idle one day so it put a new Walbro fuel pump in and has been great fixed up the miss at idle i was pretty sure it was on its way out :)

there are a lot of fake walbros though so be careful but for $180 bucks its cheap upgreade knowing your not going to run out of fuel

If it ain't broke don't fix it doesn't apply to old fuel pumps. If it leans out or fails at high revs bang goes your motor. There is a Walbro with the skyline fitting kit:

http://www.nzperformance.co.nz/store/walbr...mp/prod_80.html

or the Bosch 040 in tank.

Had it 4 years like this

Any part on a car can fail at any time be it new or old

Edited by jjskyline79

The problem with fuel pumps is if they go from working to failure instantly while driving around normally it's usually fine as the car will usually just stall on you or simply won't start as others have said. It's when they slowly begin to fail and it gradually leans out more and more due to a loss in fuel pressure or when you start giving the car a bit of a thrashing, that's when it can take an engine with it.

PM-R33 is spot on. if it fails this is OK as the engine stalls

its only when you are pushing power out of it, and it cant keep enough

the engine has enough fuel to run, but not enough to be safe, so it leans out

your engine goes bang

we've seen a GTR R34 do this with a pump that couldn't keep up, costly rebuild and dangerous fire

i have basically the same mods as you and my pump is fine.

even though it is still working ok i am going to change it very soon.

i figure for $150-$180 it is a very cheap assurance.

and going by the recommendation of well known skyline mechanic, the walbro is fine to use.

there is one guy in this country who has gone through 4 engines in the last 3 months. he kept rebuilding the engine and was not interested in searching for the reason it is happening.

He is now asking for my help. Pump will be replaced and AFR's will be checked now ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Small update, it's been slow moving over the Christmas period with money having to go everywhere thats not my car 😅. I got myself a little present to myself from "santa" in the form of some tidy radiator mounts from fitmint automotive to get rid of the stock ones that look like they have been in an accident before and then straightened by a caveman. I know I should've replaced the rubber bush at the same time but I had no idea how bad they were until I was replacing the mounts. Decided to order their dash mat while I was at it as I feel like I am lucky enough to have a pretty decent condition dash and I don't want to risk it being ruined while it's parked in the aussie sun while I'm at work. I have found another electrical fault to add to the evergrowing list to eventually chase down. Every time I replace my taillight globe it blows within a day of use, I'm starting to think my life would be easier if I took a few minutes to learn how to use  a multimeter 😂.   Had some luck with finding a series 2 drivers headlight on marketplace to replace my mismatched series 1 headlight, a subtle difference but it's nice to have a matching set of lights now.   I returned to the air con problem due to being sick of this summer heat, found a good condition condenser to replace my leaking one! I got it in the car and was happy when I got the thumbs up that the system was now holding gas. Sadly the compressor is not kicking in for some reason, we even tried branching the relay in the fuse box. I have tried to do some research on the issue with no clear understanding of what the fix is, so for now it will be placed on the backburner until I can be bothered to look into the wiring to the compressor. The last small mods I have done was cutting the horizontal vents out of the front bar, not really in a functional airflow sense but I just think it looks better as I am not a fan of the series 2 bar. I also switched the shift knob out for a hosoboyo aluminium grex style one, it has a really nice more direct driving feel than the outdated rubbery oem one. Thirdly, I chucked on one of the ebay bonnet strut kits. The fitment is decent and they seem to work fairly well. They have only given out once while the car was parked facing downhill, I think if I was working under the bonnet I would still put the oem hood stay up to be precautionary as to avoid getting a speedy concussion.
    • Got pneumonia, haven’t played with her in a while, but I’m back now. Previous owners cut bonnet pins into the bonnet. My choice try find a replacement or spend $15 get some pins myself to cover up. Now only one small hole to cover. looks shit now, but when the bonnet is red again. Be good 🤞
    • No R32 GTSt had 15" wheels. 205/55-16 was standard GTSt fare. 4.36:1 is standard R32 turbo auto diff. I think the manual was too, not 4.11. 4.11 and 4.08 were R33 namual and auto respectively.
    • Well found out it’s a 60th anniversary gtst from that it came with 205-55r15
×
×
  • Create New...