Jump to content
SAU Community

Recommended Posts

Hey guys, My cig lighter has been causing problems i think, Before the lighter would only work if the headlights were turned on, which i found weird but never used it so i left it. Then the other day my cig lighter became loose from its socket so i tried to see if there was any loose wiring but could not see anything wrong, but i dont know what the heck im lookin at anyway.

Now after the cig lighter became loose from its socket the parkers, tail lights, dash lights stopped working. I replaced the lighter fuse which was buggered but it did not fix my problem. I replaced a burnt out tail fuse and the dash lights came back on, when i went to see if my cig lighter was working (which it wasnt) the dash lights/parkers did not come back on. The tail fuse that i just replaced blew immediately, I replaced it again but this time i didnt touch the cig lighter, i only switched the dash lights/parkers on and u betcha the same new tail fuse blew again.

Does anyone with an ounce of electrical knowledge better than mine know what might be the problem?

I supplied a pic in case theres something obvious im missing, the arrow shows the fuse that keeps blowing. Im thinking i might need a auto electrician to maybe fix my cig lighter thats fkn things up??

post-43914-1277700455_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/326638-my-r34gtt-fuse-blows/
Share on other sites

The cig lighter is a common place to draw power from for boost controllers, boost gauges etc, might be worth looking to see if a previous owner has done this and messed with the wiring somehow.

does your cig lighter have a white ring around it that illuminates when lights turned on?? that wire might have come off. otherwise if it only worked when lights turned on, prob wired up wrong. prob still need to just pull that panel out and will be visually obvious.

i work at delta autospark in redcliffe, if ur free during the day we can check it out but it'll prob be much much cheaper if i did a cash job for ya, im busy 2mro i can have a look wednesday afta work. ive gota drive to alexander heights to get home so im onli realy SOR after work (round 5ish).

the cig lighter will have an acc feed and and earth going into the back of it and a park light feed going into the side of it.

i cant tell you why it was only working when ur headlights were on that sounds really strange unless some retard gave it a headlight power feed (cant understand why)

the actual element might be all loose right inside the socket and shorting out, and cigarette lighters are usualy all pretty universal and cheap (atleast it'll rule that out)

or theres a short in the wiring the first place to look would be behind the cigarette lighter.

pm me if u want me to have a look at it

  • 2 weeks later...

All dependant interior light (dash cluster, dash switches, climate control, glovebox, auto shifter) are all on the same circuit as running lights/park lights.

This is why it would only work when you're headlights were working (power is meant to be independant to illumination, read below)

its possible that the power for the cigarrette lighter is feeding off the illumination for the ciggarette lighter.

An intermittent breach in the circuit would explain fuse blowing only in specific circumstances. Brake lights will work, as the brake light circuit lights up both filaments anyway, headlights will work, but no park lights, and you wouldn't have interior lighting.

there are two harnesses going into the cig ligher.

the one in the middle is actually for illumination, and the smaller one beneath it (which you would THINK is for illumination) is actually for power) its common for connectors for either of those to snap easily. Check the wires within say...one metre, or if you can, trace them all the way to the fuse box, and see if they've been crossed over.

Edited by Nic_A31

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would paint match the whole thing to avoid unwanted attention  I had a similar bonnet, paint matched, on my old R33 GTST, but mine was a fibreglass jobbie made by Blitz in QLD, they work extremely well for radiator efficiency and under bonnet temps
    • Does anyone run this kit with factory plenum? Does the adapter and bosch tb fit under factory strut brace? I wanted to get this setup before going forward facing manifold. Thanks
    • small update time, after always wanting a "cool" looking bonnet for my car and always struggling to find one for the series 2 that i liked and wasn't an insane amount of money. Saw one i liked on RHDjapan from D-speed in Japan the price was very good for a carbon bonnet so good infact i was a little unsure how much i trusted it, decided to bite the bullet and with the help of jesse streeter in not long at all it was at my door. Once it was delivered i ran in from work and quickly unboxed it and to my surprise the quality was actually pretty good i quickly removed the old bonnet and placed on the new one to test it out and even the fitment wasnt too bad at all. Then decided to paint the little grille in the bonnet black to stop it sticking out so much.   I decided to not mess around with the hood latch and just install some aero catch hood pins, having never installed them before did some YouTube university classes and i was good to go. fair to say it is not a fun job at all from making brackets so the pins sit nicely and actually cutting through the bonnet but also being very scared of cutting the holes too big it took wayyyy longer than i would like to admit but finally got it there. Then it was time for a quick test drive to ensure the latches actually worked and thankfully the bonnet looked very stable. I still think paint matching the bonnet and leaving just the part that sticks up as carbon would help make it all look alot neater as im not sure how i feel about all that carbon on a very fridge white car but will leave it as is and see how i feel with time.  
    • I think it's bound to happen, you finally get it all perfect, and bam, something will happen. I took a while to get a Commodore rear quarter repaired where a P Plater clipped it. Two days after getting it back, Sarah wiped it out on a concrete pillar in an underground car park... This is why I take forever to repair them, it stretches how long until it gets bent again... 😛
    • Nah, not really responsible for that little fiasco, but I'm still pissed at myself for writing off my 86, or when I reversed my VX into a pole just before selling it, but, meh, 5hit happens to stuff, all it takes is a slight distraction, and life is full of distractions, and "dooh" moments   
×
×
  • Create New...