Jump to content
SAU Community

Recommended Posts

Anyone had experience with these...they are basically a nismo speed + odo

which directly replaces ur original speedo + odo

I installed one in my r33...but the speedo isnt reading properly (im doing wot feels like 60-70..but speedo shows only 20kph)..

Is there any special tricks involved..like re-calibration etc?

thankx

Link to comment
https://www.sau.com.au/forums/topic/32665-nismo-300kph-dash-cluster-problem/
Share on other sites

really? thankx dOOd...but the thing was...this speedo wasnt fresh outta the box..it had previously been on another r33..

so would i really need to recalibrate again?! that part didnt make sense to me...

unless the calibration got knocked out..?

wots it cost to calibrate neways?!

I'm not sure how much it costs, I had mine done under warranty through the car yard because it was not reading correctly when I purchased the car. Mine was not new either and had previously been on another car.

Any guage place should be able to do it for you though. Just do a search on www.yellowpages.com.au for 'gauge'. There are pages of places listed that should be able to help.

I have that instrument cluster, all the wireing seems to be printed circuit stuff how could it "decalibrate", Mine is actually a Nismo GTR cluster...no boost gauge... but it still worked perfectly in my GTS25T

yeah! i agree wit him hehee i pull out just the speedo part...and umm it is all printed IC stuff... there is a small motor or sum sort there tho..couuld that kinda get stuck a bit and jam??

51jay: uve got the entire Nismo GTR cluster right? ive just got the 300kph speedo section installed into a standard GTS cluster..

On the PCB of the factory R33 speedo you will see a series of solder pads/jumpers, this calibrates the unit. Ie an automatic uses double the signal pulses of a manual, so take a automatic speedo (or one setup for it) and it will read half of the true speed if fitted in a manual. Don't have one in front of me, but its just a series of jumper connections on the upper left I think, each jumper is so much %, ie one jumper will add in 20kph (at what whetver hz your feeding the signal at), and the next one down will add in 10kph and next 5kph and you just jumper till its right. I assume the Nismo is the same as its basically just a new face plate and possibly geared differently, only seen a couple and that was early last year...

So you can do it yourself, or pay a few $$ get someone else to do it, will only a few minutes if they know what they're doing (plus time to remove and refit if you take the car)...

REALLY! damn cuz ive returned the damn unit to the ppl i bought it from...but when i had it..i yanked out the speedo section of the cluster but cant rememebr seeing any jumpers...

wot do the jumpers look like?? (they arent like PC motherboard jumpers are they??)

I'm not 100% sure, but I think the speed signal might get split from the cluster and goes to the relevent ecu's (engine, auto, hicas or powersteering modual for non-hicas cars).

I know when a GTS4 lost its hicas/4wd it was the speed signal that was missing, but I never actually found its source, I ended up piggy backing off ecu pin 53.

R34's are definately from the ecu, but change the signal thats output from what I've heard.

The speed signal from my microtech ltx-12 ecu which goes to my auto computer may need to be altered in some way in that case.

I reset the auto ecu by disconnecting the battery and reconnecting it which seemed to fix everything, but the next morning once the car got hot the same trouble came back with the gearbox failing to drop into a lower gear under full throttle at 70kph it stays in 4th.

So I am assuming the speed signal is not right going through from the LTX-12 to the auto computer.

Where is a good place to get the auto computer looked at in Sydney?

Wonder why it only seems to be an issue when the car gets hot.

Other symptoms are the overdrive button stopped working and the oeverdrive light flicks on and off by itself when its bumpy or I hold the gearstick in first under hard acceleleration the light comes on (o/d off), then goes off again once I move the stick to second.

I am getting the front castor rods fixed up this week - front left one has split - wondering whether this affecting ABS may affect the gearbox like this?

Once I go to full stop the next accelleration is normal but if then cruise for a few moments it won't drop a gear again when I plant the accellerator.

Maybe the ecu needs to put out a normal signal to the auto computer

while the double hz frequency goes into the ltx-12 it might need to convert back to half rate Hz to go to the auto ecu?

Anyone know what is supposed to happen for R33 series 2 auto?

edge: just outta curiosity right...LTX-12 = 6cyl ECU...???

wots the diff with LTX-8? cuz i think thats a 6cyl ecu as well?

oh and has anyone actually seen how the "signal" is sent into the speedo?

the 4 screws that actually hold it in place..conduct the signel thru the cluster to the speedo..a fren showed me that..cool stuff! heeh

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Late to this party but here is your go to shop in perth - https://www.facebook.com/gsautoworksau GTSBOY is on the money cost wise, drive in and out will cost you 15-30k or more.    Some items that will save you money  - plug in link ecu g4x is much cheaper than haltech.   -Pulsar turbo, seem to be "OK" now, never used one myself You really don't have to build the motor, E85, headgasket, studs and a good RB26 will live for ever.    Swapping over the twins won't save much as you still need ecu, tune, fuel system etc.          
    • Welcome back to the scene! Godzilla Motorsports were well regarded back in the day.  My GT-R had work done there prior to my ownership.   SRS (Street Race Solutions) in Toowoomba worth a look.  They've built some pretty wild Skylines. Their YouTube channel is comedic to watch!  I'm sure they're all on the glass BBQ but they get shit done! 🤣
    • Hard to say what the extra connector is, it looks a bit like a coax type connector, so possibly a separate radio/GPS antenna, or even another camera input?  The V37 series (including the Q50), did go through a model refresh in 2020, since Australia didn't get any Q50s newer than 2019, we didn't get any of the refreshed models, so there could also be other unexpected problems to overcome to swap an older Q50 head unit into a new model V37. There probably aren't too many people around that have made these sorts of changes to a Q50/V37, so you might end up being the first if you do decide to go ahead. ACP is Apple Car Play and AA is Android Auto, they are roughly the same thing for the 2 major phone operating systems (Apple's iOS and Android), it allows you to connect your phone and access a number of your phone applications on your car system.  With Nav apps included, so you could use google maps/Waze or whatever your favourite navigation app is, instead of using the built in navi system.  I think this would be a better solution if it is only Navigation that you are looking as swapping the head unit for. GPS signals are the same around the globe as the GPS satellites continuously circle the globe, but it is the head unit that doesn't allow you to load Australian maps, or at least no-one had made an Australian map that will load up on the JDM head unit. Regarding the TV standards, I assume you are referring to the AV inputs?  I haven't ever tried to use them, Japan used a slightly modified version of the US NTSC system, and Australia uses PAL for composite video, that said, I wouldn't be surprised if a video input could work with either system.  That is mostly irrelevant here though, unless you plan to use those inputs for something?
    • If you've got bucket loads of $. Go single. If not, just upgrade the twins, Garrett -9's or whatever the current equivalent is for a healthy 350awkw and leave it at that. Will probably still cost you 10k to do in this day and age.
    • When you looking to buy injectors?? I could possibly sell you my 1d1700s for decent price. Done little work I just need bigger again 😫 
×
×
  • Create New...