Jump to content
SAU Community

How are stock GTR BOVs?

Merli

By Merli,
in Engines & Forced Induction

 Share

Recommended Posts

whatsisname Grand Master

whatsisname

Posted
Posted

Andrew,

A good mate of mine up your way (his nick is 'third' on SAU) has been researching this exact topic recently! He has a '97 GT-R with a quite a few mods (311awkw SAS dyno) & at times runs 20+psi.

As you can imagine he's had a wide range of responses on the stock BOV topic. Jim from CRD seemed to think the stock BOV's weren't a problem even at mid 300kw levels (at wheels). We asked a few local Adelaide tuners & one of them said straight away that above 15psi & they "can" leak.

He is planning on doing a bench level pressure test to see exactly what psi his BOV's open, may have already done it?

whatsisname Grand Master

whatsisname

Posted
Posted

No prob's mate. It 'may' take a little while for him to reply as he's not a frequent SAU user (posted twice in total) Tell you what, I'll give him a ring tonight & see what he's got to say.

Amaru Veteran

Amaru

Posted
Posted
Do they leak easily?

I'll be running upto 1.5  bar... Will the stock BOVs be okay? Or will they be leaking causing me to stress the turbos out unnecessarily to make 1.5 bar at the plenum?

Theyre crap, want to sell them to me or trade for Blitz DD setup? :):D

Being serious though, ive been told by many a shop they can hold decent amounts of boost without leaking (upwards of 1 bar). If you do take them off, send me a PM as ill be extremely interested in buying them. The Blitz ones are cool and all, but nothing compares to the woosh noise the stock ones make.

Merli Grand Master

Merli

Posted
  • Author
Posted

Hey, thanks heaps for the help guys!

Amaru: I'll probably end up replacing them with a single Trust Type-R BOV in a few months time... If I do, I'll send you a PM...

YRL05S: That would be great, but does your compressor have variable psi? If not, how will you know what pressure it takes before they open? Let me know how you go :)

  • 2 months later...
N/A® Experienced

N/A®

Posted
Posted

Merli,

I have used Blitz ones and they make the car run terrible. Boost isnt responsive and idle is horrible. On recommendation from HKS Japan, I have returned to the standard GTR ones. Even HKS do not recommend replacing the bov. Even if using a hks item.

Quote: "BOV changea.. noo good.." "Original good"

FYI: this was for a gtr running 2530's.

Merli Grand Master

Merli

Posted
  • Author
Posted

Whoa... this is an old thread! :D

Butthead: I'm not going back to stock BOVs, I have them on there at the moment, and I was worried that they would open prematurely and leak, causing my turbos to spin extra hard to make the 1.5-1.6 bar I want at the plenum... So I started this thread to see if I would need to change to a Trust Type-R or something like that... Seems like the stockies will work just fine!

Thanks N/A... Sounds like the stock bovs are going to stay! :(

Kamikaze: Not sure whether they're spring or diaphragm-type bovs... In fact I don't even know if there's a difference :)

Guest INASNT

Guest INASNT

Posted
Posted
we should ask leewah how they are as he still uses them on the 500rwkw plus gtr

the ice supra which has 400+rwkws runs these aswell aparently

niges supra is putting down 500rwkw with 2 bar boost now and still using stock GTR bovs just like Leewah, so i guess they aint that bad.

I got some in my car now as well and its holding 19psi and 280rwkw easily

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      V36 wreck (edited from V37 by mod)

      By GTSBoy · Posted

      That's it. Too rich for me. I'm out. If it does start to sell in pieces, I'll probably register an interest in the diff & axles, gearbox & tailshaft, and maybe the brakes.
    • MBS206
      V36 wreck (edited from V37 by mod)

      By MBS206 · Posted

      I tried my best, well I see how it is though... It's time to be ruthless! I'll up my bid with a JVC sub and an amp to run it, 8 stainless steel drink coasters with a rubber backing, and a photo of Tom Cruise. Oh, I can increase the cash portion by 20 cents if that helps. 
    • MBS206
      Blue/grey smoke after idle

      By MBS206 · Posted

      Or if it's grey, is it watery? Does it do it after you've been for like an hour long drive it will still do it, or just near the start of the trip? As GTS said, does it seem like oil (blue), water (white/grey) or fuel (black)? Sometimes the colour can be hard to see clearly too for what it is, as GTS says, what's it smell like?
    • MBS206
      ugently need expert / experienced opinion

      By MBS206 · Posted

      I wonder if part of it has to do with when you've each bought the kits. I honestly have the feeling that the silicon joiners in the 2000s were actually better quality than most of what you can find these days. Even in the same brands. Everyone racing to the cheapest price while still trying to make profit means lower quality parts. For coolant, I personally would be going with rubber, OR, converting the radiator and engine to use the huge AN fittings hose for radiators.
    • dbm7
      Shifting questions

      By dbm7 · Posted

      If shift solenoid A is bad, that explains limp mode --- now you're in the same position as I mentioned previously, in that the next step is to confirm loom/wiring integrity from TCU to gearbox connector with a multimeter (the TCU cannot detect a broken wire, which can happen ..ie; rodent damage, loom rubbed through)...and then finally measure resistance (at the gearbox connector) for shift solenoid A ... ...once you confirm shift solenoid A is bad (open circuit, really low or greater than 40ohm resistance), then it's a job ; you have buy a complete solenoid set, get under the car and drop transmission oil pan, and remove valvebody assembly (the solenoids sit on top), replace solenoid set, and reassemble....it's not exactly a fun task, but readily doable.
×
×
  • Create New...