Jump to content
SAU Community

Recommended Posts

Hey guys,

Anyone here had any experience with K-Sport coilovers?

Im looking at getting new suspension and i came across some of the K-Sport height adjustable coilovers?

Are they worth getting or are they crap?

cheers

Link to comment
https://www.sau.com.au/forums/topic/326957-k-sport-coilovers/
Share on other sites

Hey guys,

Anyone here had any experience with K-Sport coilovers?

Im looking at getting new suspension and i came across some of the K-Sport height adjustable coilovers?

Are they worth getting or are they crap?

cheers

Have you thought about contacting Ryan from ISC Performance. He sells the N1 coilovers and they're noice for the price. :rofl2:

He's also a club sponsor with 10% discount ... just show your membership card. And he's local, so he's quick with service and answering you questions.

I've had a set of these coilovers on my Stag for over 18 months now and no complaints.

http://www.isc-warehouse.com/index.php?mai...ff5534bfc0b60be

:D

i have ISC coilovers my only complaint is there too stiff BUT you can choose the spring rates however i bought mine 2nd hand so had to put up with what the previous owner got

that being said when i got them the end caps didn't fit my application and Ryan changed them to suit without even thinking

EDIT

Ryan is this what the new N1's look like or are they still blue

isc_strut2.jpg

Yeah steve that's what they look like now, they are pretty stiff for standard coiloves spring rates (8/6), consider bc coils if it's used mostly as a daily. Cheap and comfy while Doing the same as othe base level coils

I work as an Automotive engineer, and certify coil overs as for road use required by transports SA. Of all the ones I have Seen K-sport were the worst. The vehicle was a Z32 Fairlady (300ZX) the total suspension stroke was 70 mm approximately 1/2 of that was droop travel so from normal ride height to fully compressed there was about 35mm travel before the shock bottomed out and 30mm of that was taken up by bump rubbers.

so awesome 5mm of suspension travel before hitting bump rubbers.

And wouldn't you know it all 4 shocks had blown seals and were leaking and from memory he had them in for less than a year. Not surprising that they were all blown seens as they were bottoming out all the time

I work as an Automotive engineer, and certify coil overs as for road use required by transports SA. Of all the ones I have Seen K-sport were the worst. The vehicle was a Z32 Fairlady (300ZX) the total suspension stroke was 70 mm approximately 1/2 of that was droop travel so from normal ride height to fully compressed there was about 35mm travel before the shock bottomed out and 30mm of that was taken up by bump rubbers.

so awesome 5mm of suspension travel before hitting bump rubbers.

And wouldn't you know it all 4 shocks had blown seals and were leaking and from memory he had them in for less than a year. Not surprising that they were all blown seens as they were bottoming out all the time

So when you say you work for dtei do you engineer cars for the general public?

Yes that is the new version of the ISC N1. They are also valaved approx 10-15% softer then the older blue N1 spec coilovers, this along with a suitable spring rate and 32 steps of damper adjust will see a reasonably comftable ride on the street whilst still being firm enough to head out to your local track days etc.

I bought a new set of K-sport coilovers for my 2006 STI , they lasted about 25000km of road driving and the odd track . both rears started spitting out fluid and started cluncking - shit themselves , performance and ride was average as well . i will never buy anything K-sport again .....

i think its a bit shit how people rate their coilovers. They are only as stiff as the chosen spring rates allow?

With local support and parts heaven forbid anything breaks, ISC!

Too true.......there so many half decent shocks out there that are ruined with nasty springs.......even my beloved Bilsteins can feel like crap if mated them with the wrong springs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • From when I was looking at getting the 86 engineered for the turbo, the joint said to put in a few euro 5 or 6 cats, then tune the car on a nice clean E85 tune When I was looking at a turbo for the MX5, it was basically the same thing, a couple of cats and a nice clean tune Although, it will depend on the year of the Jeep IRT emmisions standards required, and what mods are done, especially if it has a newer engine installed that requires a higher Euro
    • Yeah - but it's not actually that easy. There are limits for HC, CO, NOx and particulates. Particulates shouldn't be a concern in any petrol engine unless trying to comply to the very latest Euro standard. But getting a tune right so that all the others stay within limits AT THE SAME TIME is not a trivial exercise. You couldn't possibly get it right by just guessing at the tuner's dyno, unless he had a 4 gas analyser up the pipe, which is not often the case these days. It used to be. Every decent shop that did "tune ups" (as opposed to tuning) would have a 4 gas analsyer. Perhaps there's still quite a few of them around these days. But most "tuners" are only watching O2 and power readings.
    • Slight segway but the most expensive part of the whole thing which I would have thought would only be required for an engine size/type swap, not a VIV test, is emissions testing.  That's when you get into the big bucks.  I can't remember the exact price now but I got quotes for the GT-R based on swapping to RB30 (not that anyone bothers doing it legally anymore...) and it was around $4500 just for that alone.  The guy that does them manipulates the tune on the vehicle to make sure it passes.  The cheaper option is to book into Kangan Batman Tafe (I think that's where it was) and hire their tester.  Allegedly you're not allowed in there with the car though so not in a position to tweak anything to make sure the vehicle passes.  I'm sure in this day and age of ultra tuneable ECU's you could get the tuner to program a special efficiency (clean) tune that emits the lowest amount of particulates possible that would pass the test.  It might only make 50kW's but as long as it passed who cares!
    • I'm sure he has left signs, or, he is looking down, laughing That's my cunning plan for when I leave, lots of half finished projects, with no rhyme or reason of where I was actually up to, just to keep everyone on their toes
    • Does that price include the rack time to straighten the frame and body and replacement of parts and paint, as well as the noise and emmisions testing  The last engineering certificate I had done, albeit about 15 years ago, was around $1000 for a few inspections and the certificate 
×
×
  • Create New...