Jump to content
SAU Community

Recommended Posts

No, Not true, Lt12s is newer than the Ltx12, only real difference is the lt12 doesnt have inbuilt ignitors where the ltx does, just means you will need to use the standard rb20 ignitor or an x6 box.

What have you modded to fit the cams? BTW they arent drop in.

i bought a worked engine and i have an a4 page of stuff done to it, not to keen on posting as i dont want to type it out, is there anything in particular that you want to know???.

i have spoken to the tuner again and he said an lt12s with x6 box is fine but i should buy coils as the stardard coils are not the best way of going about it, im not sure about that there seems to be a lot of people running standard coils

You need a new tuner.

yeah tell me about it i think he just wants me to give him more money, so what do you reckon use lt12s and x6 box to run my rb20 with rb26 cams, and not worry about the standard coils as they will be fine. or should i go in another direction???

Just use the standard ignitor, I am on an rb25 and its fine.

i see you are on the coast, go see Matty Spry at PITS or Gavin wood

cool, i can get an lt12s for cheap as with a plug n play loom, if i can use the standard igniter and coils this will be great, i am on the coast and can i grab this guys number. so the fact that i have different cams (rb26 ones) in my rb20 doesn't mean i have to get the crazy ignition set up. Cheers, Jonno.

i bought a worked engine and i have an a4 page of stuff done to it, not to keen on posting as i dont want to type it out, is there anything in particular that you want to know???.

i have spoken to the tuner again and he said an lt12s with x6 box is fine but i should buy coils as the stardard coils are not the best way of going about it, im not sure about that there seems to be a lot of people running standard coils

Are you running solid lfters, because gtr cams dont work with rb20 hydraulic lifters.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • BOVs do have a purpose, if you ever log pressure before and after the throttle body, you will see a spike pre throttle on lift off from a WOT condition. Enough to bend throttle blades / damage e-throttle motors or simple assist in blowing off cooler pipes. FWIW, the above on really applies to those running at least 2 bar of boost. OP shouldn't have an issue, on the other hand, here are some videos of my shit box over a decade ago with some succulent dose with the airbox on and off. That shit box is unrecognisable these days 🫠    
    • I've tried all different combinations of BOVs/ no BOV and stock bypass valves over the years, on gear changes the stock bypass valve seems to get the car back on boost quicker because in part the turbos wheel speed isn't being slowed down by reversion, although they have issues holding boost much over the stock setting. Most aftermarket BOVs you can adjust the spring, tighter will make it open later and close sooner, but in my experience it'll cause a bit of flutter at low load/rpm anyway. I've also got some input into this whole no bov causing turbo wear, never had an issue on any on my turbos HOWEVER, I got my R33 GTST with 200k kms on it, with from what I can see still has the original turbo, no lateral shaft play but has about 4-5mm of play in and out which to me seems like a worn thrust bearing from years (100-150k kms?) of turbo flutter running no bov, so maybe there is some truth to it in the long run. But that'll never stop me loving the Stutututu while I have the car.   OP just wants to know if he can run a atmo vented BOV with no major issues and the answer is YES, plenty of people do it, there's no harm in installing it and seeing how it runs before spending $$$ on an aftermarket ecu, last time I bought a Nistune it was $2400 for install and a tune , unsure of todays prices but you get me. Crazy money to spend just to fix the minor inconvenience of stalling that can be overcome by letting the revs come down to near idle before putting the clutch in or a little bit of throttle to avoid it. You're better off leaving the ecu and tune for after a bigger turbo/injectors have been installed to take full advantage of the tune and get your moneys worth.   Let OP have his Whoosh sound without trying to break his bank haha
    • I see you missed the rest of the conversation where they have benefits, but nothing to do with avoiding breaking turbos, which is what the aftermarket BOV made all the fan boys, tuners, and modders believe was the only purpose for them...
    • But they do so for the other reasons to have a compressor bypass. It's in the name.
×
×
  • Create New...