Jump to content
SAU Community

Fs: 2003 White 350gt 6spd Manual - Adelaide

hiroe
 Share

Recommended Posts

hiroe Rookie

hiroe

Posted
Posted

Hi there,

For sale is my white 2003 Nissan 350gt

I have only just imported this car some 2 months ago, and have finally received it back from compliance... It is unregistered, but has compliance documents ready to simply go to transport SA and register under the new owners name. (the reason I have not registered myself is to save money on stamp duty and as a result am offering the car cheaper than I would have otherwise). Though I wouldn't like to reveal too much personal information, the reason for selling is mainly financial, though please be aware the car is unencumbered and will be sold free of finance. I am happy to provide the VIN number to anyone concerned. Due to the car not yet being registered, no Australian finance company would allow the car to be used as security on a loan anyway.

The car is as close to immaculate as I have seen. The only imperfection I have spotted is where someone with dirty hands has handled the passenger sun visor and smudged the roof lining a little. I will list below all features that I am aware of...

Pearl white

6 Speed manual

52,xxx kms

Aftermarket stainless steel exhaust with "small" tips (stock exhaust included in sale if the buyer wishes)

Bilstein suspension (stock suspension also included in sale)

Pioneer and Kenwood Head units - Pioneer is the bottom unit for music/cd, Kenwood is the top unit - appears to have been used for tv and sat nav in Japan. Kenwood unit is in Japanese.

Momo factory steering wheel - from all reports on here this wheel is somewhat uncommon and is a little meatier than the stock wheel.

BBS RS 18" Rims - Approximately 60% tread left on the Dunlop SP Sport Maxx tyres (front and rear), rims themselves are immaculate, 9.5" front, 10.5" rear (I think!)

Car will come with 2 sets of keys and valet key

Apologies if I have left anything out, please feel free to ask questions here or in a phonecall/pm.

I am chasing $27,000 for the car which includes stock parts as mentioned. If the buyer wishes, I can exclude the BBS rims and swap them for stockies, at a reduced price. This obviously means that the BBS rims will potentially be up for sale following the sale of the car, so feel free to send me a pm if you would be interested in these if they became available.

I would prefer to be contacted by phone on 0403527398 but feel free to pm me, I do check regularly.

Cheers, James

post-73501-1278060827_thumb.jpg

post-73501-1278060840_thumb.jpg

post-73501-1278060847_thumb.jpg

post-73501-1278060857_thumb.jpg

post-73501-1278060870_thumb.jpg

post-73501-1278060878_thumb.jpg

post-73501-1278060886_thumb.jpg

  • 2 weeks later...
hiroe Rookie

hiroe

Posted
  • Author
Posted

Have had limited interested from here and carsales so have decided to drop the price to $25,500.

Ive just re-read my own original ad and I may have indicated that its not possible to get finance on this car - what I mean is that finance would only be given once the car has been registered. Once that is done there are no issues gaining finance on the car. Sorry if I confused anyone here.

Cheers,

James

win4ever Community Regular

win4ever

Posted
Posted

James,

I think many were suggesting that you post in the general car for sale forum instead as most guys here would already have a v35.

Hope you'll find a buyer soon! I gotta say, it looks like a fantastic car in the photo!

Always think pearl white looks really good on the car.

Cheers!

Have had limited interested from here and carsales so have decided to drop the price to $25,500.

Ive just re-read my own original ad and I may have indicated that its not possible to get finance on this car - what I mean is that finance would only be given once the car has been registered. Once that is done there are no issues gaining finance on the car. Sorry if I confused anyone here.

Cheers,

James

  • 3 weeks later...
  • 2 weeks later...
R6n350GT Experienced

R6n350GT

Posted
Posted
Thanks Loh,

Didnt notice your post until today. Thanks for the heads up, I didnt realise I could post in the FS section with a low post count, cheers!

James

Nice Car James, too bad ur not in QLD.

who did u import the car through?

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Is there a shroud around the tailshaft spline into the back of the box? They can rub and make a horrible noise if they are not on straight/damaged. The heat might have caused it to grow too much in one direction and rub.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Strangely I noticed it either disappear later in the day, or not be present. I definitely noticed when I was crawling around that open wheel thingy entering the pits (that part was audible in car). Driving home and commuting around town for example, I didn't hear it. It's plausible that it was a brake disc or something still slightly in contact. The brakes absolutely felt BAD for the first couple of sessions, huge amounts of shudder and grinding as they got up to temp - And then I actually just forgot about it as the day went on/didn't notice it. The videos were from the morning when this was more present than the afternoon/drive home when it wasn't. I've asked around and got a variety of responses including handbrake shoe contacting hub, CV joints, CB tailshaft bearing as above, and clutch input bearing. I didn't test if it disappeared when clutch was in. I haven't noticed it in any of the other videos nor did I notice it when driving to that extent. More or less hoping the microphone at the rear license plate giving some kind of clue of 'something' but it looks like "spin stuff and see if you can notice it" is the way forward here. I could be smart and use the gopro mic and re-mount it to that location to see if the sound is still present at low speed actually. Sounds like a decent test whenver I have the CBF'ness to drive the car again. Given it's almost 40C for the day of the track day and the next 3 days after, the CBF is high. All I've done since getting home is unpack the car, remove the remnants of the lip and undertray and left it there. I was surprised how well the PMU Club Racers actually worked. The brake performance on the track was absolutely fantastic, best I've ever personally used, no fade whatsoever and the bitiness was almost too good, I was scrubbing more speed off than I needed to, but I also ended up infield when I started trying to scrape off ... less speed.... so...
    • GTSBoy
      R34 GTT idle problem

      By GTSBoy · Posted

      Not really, no. Anything you would do is easily reversible.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      I would like more noise related info for my truly uneducated guess  Does it do it at idle or when revving, clutch engaged, and disengaged? Does it only do it when the car is moving? I've heard "similar" noises from a clutch pack that left the chat room, and CV joints that have chewed themselves out But as Matt said, how's the yokes, tailshaft and centre bearing going after their last little issue Fingers crossed it is something simple  Weird noises make me cringe 
    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      One other question, is there a chance that changing the idle speed can lead you down a rabbit hole and is the reason the tuner didn't touch it? Reason I ask is because if that's the reason the tuner avoided it then I probably shouldn't be touching it lol.
×
×
  • Create New...