Jump to content
SAU Community

Vic: R31 Executive Rb30 Auto 3 Litre


Recommended Posts

R31 executive Rb30 auto 3 litre beast.

280.000kms that’s early life for a r31.

Rego to October 10th.

Can supply rego I will be getting one soon in the next couple weeks if there is a serious buyer.

This is my daily I drive to work every day for the past 6 months. Has never had a problem at all.

Always serviced by myself or my mechanic.

Fantastic tow car towed my r32 to winton from hoppers crossing twice and not one problem or hassle at all.

Reason for selling is I have nearly completed my r32 to drive as a daily so won’t be needing this car.

Engine:

Bigger sump, cleaned and brand new Nissan oil pump can say it’s all brand new.

Head has been taken off and cleaned up.

Upgraded cams. Nothing extreme.

Engine bay is clean as a whistle,

Brand new bosch power steering pump

Brand new bosch alternator.

Brand new bosch belts x3.

Brand new bosch coil’s x6.

Brand new spark plugs x6.

Brand new radiator hoses.

Brand new water pump.

Brand new thermostat.

Brand new Nissan head gasket.

Brand new Nissan manifold and exhaust gaskets.

Brand new vacumme hoses, water lines, oil lines. Nearly every hose is brand new.

Gearbox:

Has been reconditioned everything is brand new in this gearbox and runs smooth as.

Brand new motul gearbox oil.

Diff:

standard diff.

brand new gearbox motul oil.

Suspension:

Brand new lowered king springs up front.

Standard rear choppies super low.

Has got heavy duty springs and shocks atm for towing. Cost over $500

Brand new front rods from bursons (forgot what brand).

Exhaust:

Stock all the way besides diff back is a 3 inch pipe its legal.

Wheels:

Unknown brand wheels. 17.8 +30, 17x8.5 +26. Bald tires will come with rwc tires from a roadworthy soon.

Interior:

stock blue seats everything is in good condition. No rips in seats nothing, floor is a blue fluffy material very nice.

Has 3 drift gauges water,oil temp, oil pressure,(not hooked up) from autobarn, big monster auto gauge tacho (working) from autobarn.

Sony headunit, with speakers and splits, all working.

All electrics, aircon/heater, lights, everything works. Besides roof little light lol I will fix that with a $2 globe.

exterior:

paint is really good. A light fade on the bonnet, roof and boot from the sun.

Painted black front bar and rear bar.

I have lots of spares. Wheels, pod, springs shocks.

pictures up soon guys

asking 3k at this point with rego and aftermarket springs, tow shocks and springs.

can take things off to make it cheaper.

only ring or sms me on 0430078630

located in victoria hoppers crossing

31006.jpg

IMG_0426.jpg

31pic1.jpg

Link to comment
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Luckily I haven’t bought one yet but I’ve had several people tell me different things and was trying to find out what’s going on with my car lol apparently type m had different lover knuckles like the gtr but someone put non type m knuckles on mine Ok on another topic does anyone have a spindle for sale mine is screwed bad lmao 
    • The vendor you bought from is a dickhead who can't tell the difference between AWD and RWD bearings. Their eBay listing is one of the first hits too, and is wrong. Any other hit shows the ones that are on your car. A search for GTR rear wheel bearings, unsurprisingly, finds the one you have from Shift. f**king muppets.
    • Got the flat door cards "good enough" for now. After cutting out the arm rest I removed all the stock trim material. Then filled the gap with a bit of Masonite and wrapped it in some adhesive foam to hide the  transitions as much as possible. Then I applied some black vinyl material to the panel with some spray on contact adhesive smoothing the edges as best as I could. Here is how it sits in the car with the door handle and cut down window switch mounted
    • Ok so I have a little bit of an issue. So I have a 1992 r32gtst and trying to replace the rear wheel bearing and spindle the research I’ve done shows a different style bearing than what is currently on my car. So the picture of the new bearing with the box says it’s the correct bearing as does my research but the picture shown of the old bearing is the one that came off the car. I’m a bit confused the new bearing has an ear on it that I’m assuming goes to where the top of the ebrake shoes mount as to where my old bearing does not. Any help would be awesome 
    • What in the absolute mind f**k. Generally speaking, you cannot diesel a petrol engine without sparkplugs which you don't have since you're disconnecting battery.... Something is very fishy here. 
×
×
  • Create New...