Jump to content
SAU Community

Recommended Posts

Hi,

I own a mr30 sedan and have my eye on some patrol 2.8 petrol extractors from a local wrecker and was just wondering if some1 could please tell me the amount I need to bring the flange back to make them fit.

I also scored a pair of s1 red on red hotplates for it for free from a friend who wrote his off they have a chunk missing right at the top of the left one and i wouldnt worry as its hardly noticable when on the car but they get water behind, I was just wondering if anyone knows what i could repair this with doesnt have to look that great as i want them in more to make sure i like that style before tracking a good cond set down.

Thanks in advance,

Paul.

Link to comment
https://www.sau.com.au/forums/topic/327439-r30-extractors-and-hotplate-q/
Share on other sites

flange wont need modification. the last bend before the pipes go rear-ward will maybe need bending. (just depends, not every set out there is the same. there are a few manufacturers)

clear lexan/perspex or whetever the lights are made of is very hard to repair properly. most adhesives and epoxy will make the inside go all foggy and shit. your best bet is to just use the Aus lights, hotplates arent that special (car wont go any faster)

thanks for the replay mag86 are thats even easier to just get it bent to fit looked at mine properly i dont have the flange their anymore anyway my engine pipe has just been expanded at the end and welded straight to my 2.5' exhaust, I might just have a play with the lights, i have some plastics that might work.

If your trying to repair the lights, like just cracks, get some MEK and that will fuse the plastic together. If you cant get that, superglue is your only option and as Mags said, anything you use is going to create a frosting effect anywhere you put it and the end result will be VERY ordinary, but there is light at the end of the tunnel.

As you have S1 lights, that's all red, maybe you could consider colour coding the outer red zone and then nobody would be any the wiser and the light area would only be the visible red.

Just a thought that might get your problem solved.

Cheers, D

As you have S1 lights, that's all red, maybe you could consider colour coding the outer red zone and then nobody would be any the wiser and the light area would only be the visible red.

Just a thought that might get your problem solved.

Cheers, D

Thanks Dan didnt think of colour coding the whole light will give it a go lights didnt cost me anything so i have nothing to loose.

  • 2 weeks later...
Hi,

I own a mr30 sedan and have my eye on some patrol 2.8 petrol extractors from a local wrecker and was just wondering if some1 could please tell me the amount I need to bring the flange back to make them fit.

I also scored a pair of s1 red on red hotplates for it for free from a friend who wrote his off they have a chunk missing right at the top of the left one and i wouldnt worry as its hardly noticable when on the car but they get water behind, I was just wondering if anyone knows what i could repair this with doesnt have to look that great as i want them in more to make sure i like that style before tracking a good cond set down.

Thanks in advance,

Paul.

Paul,

You might be interested in these?

The left appears ok with a chip out of the right so you could end up with a good set for a little money.

http://cgi.ebay.com.au/DR30-tailights-RARE...=item3caef398c5

Cheers, D

I've seen those lights in person, i've been to that guys place to get some R31 Ti rims.

They looked fine to me, Chip is quite small 2cmish.

2cm sounds like a fair-sized chip. That's big enough to be called a chunk. Right-hand tail light looks a bit odd in the eBay pic, centre line doesn't seem straight.

JH

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I've uploaded logs / the current map to Gdrive if anyone has any ideas. https://drive.google.com/drive/folders/1FPnr22Z-EilG7tYdHSi0Qb07P2jfFLKV?usp=sharing
    • I'm running a Haltech Platinum Pro with the stock map for the RB20DET + tweaks for my build. When I started it this morning, the IAT was at 32F/0C (Outside temp was ~42F) and the AFRs went off the scale for my AEM gauge. I let it run for ~30 seconds then turned it off. I then did a smoke test, by hooking into a vacuum line directly behind the throttle body, and confirmed there was no leaks ( i let the smoke tester run for ~5 minutes / confirmed it was generating smoke before hand ). I then started the car again, after fixing a power steering leak.... and it seemed to be happy for ~30 seconds (was at ~11/12), but then seemingly shot back up to ~18 again. I then let the car run for a few minutes, thinking this was just cold start related, but the AFRs never came back down. I didn't let the car fully warm up, so maybe this makes sense, but I'm not sure what to do? The AFRs, when I last ran it, were normal, but because of personal reasons I haven't been able to break in the car. It was rebuilt last year. Engine / Mod list: Supertec pistons Spool rods Kelford 270 cams and Springs Stock crank Deatschwerks 900cc injectors Walbro 255 (Wired directly to the battery relocated in the trunk) NKG Audi R8 Coil packs + Conversion Harnesses from Wiring Specialties Holset HY35 turbo Haltech Platinum Pro ECU Haltech boost controller (wired in for high boost RB25 Neo transmission + needed bits for the speedo to work  
    • Not great at getting the camera out fast enough for cars driving. Even in traffic. S15 is in front of the kei truck.
×
×
  • Create New...