Jump to content
SAU Community

Recommended Posts

all parts are used but in working order.

pickup is prefered on items but some can be posted.

items located in south western sydney NSW

R33 GTST catback exhaust

TANABE branded catback for R33 GTST. twin 2 1/4 or 2 1/2 system into muffler and twin 3 inch tips.

looks a bit worse for wear but with a half assed scrub with a brush and some truck wash it came up really well. maybe some elbow grease and sandpaper could help. havent seen this exhaust on any other car. recieved numerous comments on it online and from the public.

it previously had DTM tips but i got them changed for the straight tips. previously had 3 hot dogs but had 2 removed to change the note of the system. sedate and fairly quiet sounding.

$550

http://img21.imageshack.us/i/zz094l.jpg/

http://img198.imageshack.us/i/image026ch.jpg/

http://img4.imageshack.us/i/photo112n.jpg/

http://img194.imageshack.us/i/photo113f.jpg/

http://img580.imageshack.us/i/photo114.jpg/

http://img413.imageshack.us/i/photo115q.jpg/

http://img806.imageshack.us/i/zz093.jpg/

after a quick clean

http://img4.imageshack.us/i/photo141f.jpg/

http://img4.imageshack.us/i/photo142v.jpg/

R33 GTST Just Jap front strut brace

Good condition. sprayed the mounts in Metalcast anondized blue to match my calipers. only selling due to getting a Cusco one for cheap.

$50

http://img695.imageshack.us/i/photo143k.jpg/

http://img683.imageshack.us/i/photo145az.jpg/

R33 GTST standard intercooler

Cleaned out thoroughly. works fine just upgraded to FMIC.

$50

http://img42.imageshack.us/i/photo119ra.jpg/

http://img571.imageshack.us/i/photo120k.jpg/

Manual boost controller

Works fine. just upgraded to electronic. bought this one from Shift performance and holds boost well from what i can remember.

$20

http://img248.imageshack.us/i/photo139bl.jpg/

Turbosmart Megasonic BOV with R33 GTST adapter

works perfectly. just over the whole BOV sound. has 2 different sounds changed by the soft to hard settings on top.

$350 but would prefer swap for standard and cash my way.

http://img685.imageshack.us/i/photo138e.jpg/

R33 GTST standard turbo intake pipe

nothing wrong with it just i bought a steel one.

$20

http://img269.imageshack.us/i/photo140p.jpg/

R33 GTST standard front and rear swaybars

nothing wrong with them just upgraded to whiteline

$100

http://img153.imageshack.us/i/photo118i.jpg/

Pioneer DVD player with fold down screen

works perfectly just over the whole big system phase.

7 inch fold down screen

$400 or swap for normal type headunit with cash my way

http://img199.imageshack.us/i/photo122zg.jpg/

http://img571.imageshack.us/i/photo123.jpg/

US audio 15 inch BMF series sub in box

works perfect, sounds great. as above, over the big system. 1000w peak and 500w rms

$250

http://img15.imageshack.us/i/photo124pc.jpg/

photo168.jpg

Uploaded with ImageShack.us

GTO 4000 series 4 channel 600w amp

works perfect, running the sub.

$200

http://img714.imageshack.us/i/photo129z.jpg/

PM is best form of contact

Edited by SLY-25T
Link to comment
https://www.sau.com.au/forums/topic/327462-r33-gtst-parts-cleanout/
Share on other sites

Hey bro, I would like to buy the pioneer head unit, just curious if you have the specs on it, like if it is touch screen, What output+inputs it has and what it can play (DVD, CD, MP3)

Hope to hear back from you soon bro.

I really need a new head unit mine is f**ked

yeah the player plays dvds perfectly.

heres a link to info and specs on it. http://www.mindlogic.com/CARVID_PION_avhp5750_DTL.shtml

Veeto- postage is around 30 bucks with Transdirect as aus post wont post anything over 105cm

head unit gone

strut brace gone

boost controller on hold

and now everything else is up on ebay.

will be selling my interior soon. hopefully itll get more attention

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
    • Did you use an electronic speedo drive? Does you speedometer read all the way to 180km?
×
×
  • Create New...