Jump to content
SAU Community

Recommended Posts

  • Replies 129
  • Created
  • Last Reply

Top Posters In This Topic

We noticed a massive increase in midrange switching from PowerFC to Nistune (same tuner) on an S15. Nistune is ftw.

should be no "real" difference, but ultimately there will be a smidge unless you swap each timing mark across and load point exactly (same with fuelling).

We have done a few swaps between the two as well and to TBH its around 50 / 50 and always within a smidge of each other.

bout the only ecu i find has bigger variances is the Microtech due to the way it manages timing in the software.

Getting Nistune(d) by Trent this Saturday... Can't wait!!!!!!!!

Had a mate go to Chasers (Paul) last week and he seems to be happy with his tune. Though I've heard more bad about Chasers as well. Never heard a bad thing about Trent and his tuning abilities :D

Edited by blk15
should be no "real" difference, but ultimately there will be a smidge unless you swap each timing mark across and load point exactly (same with fuelling).

We have done a few swaps between the two as well and to TBH its around 50 / 50 and always within a smidge of each other.

bout the only ecu i find has bigger variances is the Microtech due to the way it manages timing in the software.

We had three different tuners tune the PowerFC on the S15 - Rob @ Sabaddin, Sam @ Dr Drift & yourself. No-one got it right. You might remember the car - stock looking white jap-spec S15 - made 245rwkw. A bit's changed now though.

Now with the Nistune is runs like a factory car. Cold start is perfect, return to idle after backing off throttle is perfect. The car's also making more peak power on the same boost. Why was the PowerFC so bad? It used to idle hunt like crazy, cold start was terrible, return to idle was terrible. That's all gone. Unless it was just a 'bad' PowerFC, I would never go near one on an SR. That goes for all the DET-conversion Pulsars I've been around with PowerFC's as well, same rubbish idle.

We had three different tuners tune the PowerFC on the S15 - Rob @ Sabaddin, Sam @ Dr Drift & yourself. No-one got it right. You might remember the car - stock looking white jap-spec S15 - made 245rwkw. A bit's changed now though.

Now with the Nistune is runs like a factory car. Cold start is perfect, return to idle after backing off throttle is perfect. The car's also making more peak power on the same boost. Why was the PowerFC so bad? It used to idle hunt like crazy, cold start was terrible, return to idle was terrible. That's all gone. Unless it was just a 'bad' PowerFC, I would never go near one on an SR. That goes for all the DET-conversion Pulsars I've been around with PowerFC's as well, same rubbish idle.

Yeah i do remember now, just after we opened it had a real bad case of PFC 'itis.

Most of the rubbish idles on pfc's are cause of the intake pipe and afm position..... but some pfc's dont care either way.. its weird, i think build number has a lot to do with it as the early serial numbers are way worse.

eep i hope my rb26 doesnt do that bad idle when i get pfc on :(

getting my exhaust on today.. cam gears / service done by GT hyper then i'll give you a call Trent :thumbsup:

Its an SR20 thing :P turbo snout and airbox are too close and custom intakes pipes create bad reversion older version PFC's hate it.

Car got tuned @ Status today!!! Very friendly/helpful, would definitely recommend them. Below are the results:

Year/Model: 01 Spec S (adm)

Engine/Size: 2.0 SR20DET

Turbo: t28 bush bearing

Power @ boost level: 185rwkw @ 15psi

Torque: 362.5 Nm

ECU: Nistune

Modifications: gktech fmic, fujitsubo exhaust, apexi intake, walbro fuel pump, turbotech mbc

My car initially made 162rwkw @ 14psi but was pinging its head off @ 14.5 AFR (massive black smoke at end of exhaust). I was really shocked and worried as trent could see.

But all is good now with the tune, sits nicely at 12AFR though the coilpacks are on the way out...

scan0002.jpg

scan0001.jpg

You can see it pinging (red)

Car now drives extremely smooth especially down low where it felt like a slug previously. Love the pull at around 3500rpm.

Thanks Trent for saving my engine :D

Edited by blk15
tbh the big thing for me is that Trent is a regular poster on the forums, and is happy to offer free advice, not saying anything bad about anyone else, but that shows a real commitment to customer service.

so when are you coming down from outerspace to get a tune?

meh im still sorting out whether I'll need a replacement dump pipe, gotta get AFM, new intercooler kit to fix up the boost leaks, and then I should be ready to get some Nistune love happening (i did have an insane thought of getting the Microtech retuned but yeah nah).

Don't think I'll be driving it from here to Melb again either lol (roads are like a rollercoaster until Bendigo!)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah, new members can't post pics until they reach a certain post count. If I get a chance I'll promote you to full member, if @Prank or someone else doesn't get there first.
    • Drilled the rubber out on a slow speed and it didn't catch much at all. Probably only half a dozen holes was enough to shred the rubber and it dropped off easily leaving the inner sleeve behind. Will tackle that later
    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
×
×
  • Create New...