Jump to content
SAU Community

Hsvoc Sandown Track Day 1st August


Rekin
 Share

Recommended Posts

Was going to message you on the weekend to see if you were going to be running! Awesome! Was also going to see if you are up for a run up to Winton the following week?

Winton could be a definate maybe. A trailer would really help. Will keep you posted

You will be happy to know we are tackeling the brake issue head on and I dont mean by crashing in to oncoming traffic to slow down.

I have identified that all nissan master cylinders have a 50:50 proportioning up to a specific split point. At that point it goes to a 60/40 split to the rear +3/-7. I am varifying this on the weekend by tracing brake presures with a testing kit. Will provide the graph next week. If this comes out in factory spec which I think it will we are going back to std gtr calipers on the rear not the alcon setup. This in addition to the anit dive, the removal of the battey in the front and a mild brake pad should see the braking distances improve dramatically and stop the rears from locking.

Curently we have been using a 60% reducer to iliminate the rear lock up. This ment there was a 70/30 brake split when there should have been 50/50 which then decreased to a 76/24 split upon maximum braking. Obviously not ideal but better than random hand brake gremlin.

Will keep you posted.

Link to comment
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Will be interesting to see how you go. Is it using 4 channels one for each wheel, or just front and rear circuits?

If its up the duff it may simply be better to go aftermarket pedal box. Do you have all your fluff on the thing now, diffusers, wing etc?

Link to comment
Share on other sites

Its a static test kit that screws in to the bleed nipples on the calipers on one side of the car. So only two channel, front and rear.

No fluff yet but maybe by the 1st.

Link to comment
Share on other sites

I won't be driving. Might come for a watch though.

Dont want to risk $180 if I break something at winton tomorrow and can't drive and don't wanna pay $280 coz it will be less than a week till entries close.

Bit of a rip if you ask me.

Link to comment
Share on other sites

Road Trip? Will be seeing if Wakefield has a day on the following week so that after catchig up with family, the drive back to Melb for DECA wont be so boring :D Would trade it all for a 1.1 sec improvement at Sandown for a 1:21 :)

Link to comment
Share on other sites

Needs to be done? Basically new fuel pump, wheel alignment and service.

What i want done? New fuel rail, fuel filter, fuel reg, 6boost manifold install, plazmaman inlet plenum install, install titanium exhaust , SBC-R EBC installed, Gizzmo shift light installed, My-Chron wiring finished, new brakes put on, RB25box installed with new twin plate, new radiator and electic fans and fan controller, isntall front undertray, new upper and lower susp arms and bits, maybe try the cams i have sitting around...LOL, so much shit i have acquired for the car. To think i have sold some of the stuff i was going to install :)

LOL, the body got the overhaul after i took it off the road, but most of the mechanicals still need doing. Also want to give it a run down the qtr before going back OS, though not sure i have the time. Need to borrow some R32 GTR rims to buy some good drag radials. I want a 12.2 or better ;)

TRAITOR!!! Its all RB20 or go home :D

Link to comment
Share on other sites

Hey, the job looks like a 50% chance of being exported OS and buggered if i want the trouble of trying to find a replacement RB20 box abroad. Or being stranded in another country because she finally let up on me :blink:

Link to comment
Share on other sites

Wow it doesnt look good for this weekend. Sadely I will still be there sitting in a garage freezing my nutz off hoping for one semi dry lap.

Bris you keen for Winton next weekend. Both Sat and Sun have club sprints. One with Alfa and one with Jag.

Cant belive Sandown is free next weekend and no clubs are using it. Juz talked me out of enquiring for a private hire and a mass club mail out lol.

Link to comment
Share on other sites

Well, me being a fark knuckle compnay man. ..my leave has been postponed and my flight diverted to Singapore to fix fark up on a job. They are telling me its will only eb a few days but that means i wont have any time to work on the car....thats assuming i am not there for my entire two week holiday before returning to Inida on the 15th ! SO depressed right now, every time i make plans and get excited, work farks them up. I cant wait to quit this job, hopefully in the next week or two. Oer 6 years with them and whilst its good to be the go to guy, other people are treated and paid like royalty, whilst...well i stil cant afford anyting better then an R32 GTST :(

Link to comment
Share on other sites

Awesome session

I think it was a 1.35 , 1:18 then 1.17.02 then 17.2 then 16.6

Very impressive to watch and well worth waiting out the rain and wind.

Quickest car on the day by far, as the fat ambo said "that ice burner should go alright"

Link to comment
Share on other sites

Car looks so well sorted. Have to ask, has there been a change to the final drive ratio? Looks like you are pulling gears at about the same places so doesnt appear to be that different gear wise. Your power down is so much better then before, seems to help being in 3rd rather then 2nd onto the straights as well.

So, i am dieing to find out...what is the change? Rear diffuser and wing? Change in suspension and alignment? Car looks mega stable...but i am sure there was more to your wheel work then there was your footwork :domokun:

LOL, also sounds like no more gate :) Perhaps you should do a Red Bull and plumb your gate to your rear diffuser...yeh, that it, thats your big secret :)

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share




  • Similar Content

  • Latest Posts

    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
    • You can just get the injector bosses, which allows top feeds to fit. He can use the same injectors without issue, like these (another option): https://rocketindustries.com.au/af59-2210-rb25-fuel-injector-inserts     The Racework ones look a bit better: https://www.nzefi.com/product/raceworks-lower-injector-mounting-boss-kit-for-r33-rb25det-s14-s15-sr20det/   You could also just get a similar kit like the Radium one by Plazmaman: https://plazmaman.com/product/nissan-rb25det-r33-billet-fuel-rail/?srsltid=AfmBOoogfYq49X0fu2Wdbf8yOf6zt9egyPAif_gn3Qr3G8hzAphhTgOkO70  
    • You need the kit turbo taipan has shown you because that manifold ia designed have side feed injectors 
×
×
  • Create New...