Rb30/26det, T04z, High Performance Stuff

[=premo=]

Garrett T04z (0.84 rear, 0.70 front) still for sale, not sold with setup

$1250 ono

[=premo=]

Price drop $7000 ono for engine or offers for head/bottom end/inlet gear

$700 for injectors delivered

$400 for engine loom delivered

[=premo=]

Would like to get some more bits moving, open to offers

[=premo=]

Power FC D-Jetro sold

Ported RB26 head with 1inch oil drain $2200 ono

RB30 block and crank, Precision Rods, ARP rod bolts, ACL race bearings, ARIAS pistons, Tomei oil pump, Jun crank collar, 1mm head oil restriction, twin tensioner belt setup and Modified larger sump $5100 ono

GTR inlet gear (plenum, throttle bodies, injector manifold, attachments) $1200

6x SARD 800cc top feed injectors $700

Garrett T04z $1100 ono

Engine loom (modified, use to link R32 gts-t to a GTR aftermarket ecu) $350

Edited September 1, 2010 by =premo=

[GTRBOYZ]

I was wondering if the Tomei Oil Pump will fit the RB26 and If your willing to trade the rear housing .84 for 1.00AR with some cash? let me know thanks

[=premo=]

Would like to sell turbo as is because its a very good setup for medium to high power RB25's and bigger.

Tomei pump will fit all RB engines (RB30 requires a lug to be ground back on some blocks but its easy to do with a grinder)

[GTRBOYZ]

OK so how did it go with the buyer for the bottom end? Are still willing to separate the pump? let me know thanks

[=premo=]

I've dropped the price on bottom end to $4500 ono

I'll let you know how it goes, cheers

[=premo=]

Anybody interested in the long or short motor and the head before I take an offer for the oil pump?

[polishstorm]

I am interested in the bottom end! How much to send I to Brisbane 4122?

[t04z]

hey mate still got the power fc?

would love to buy the bottom end but just cant afford it atm

[=premo=]

Power FC sold sorry.

Turbo, Injectors, inlet gear and engine still for sale

All PM's replied to

Thanks

[gm747]

how much for long motor with inletmanifold, no injectors PM ME

Edited September 26, 2010 by gm747

[t04z]

are you selling just the turbo beanie??

[=premo=]

Turbo beanie wasn't in very good condition so I sold it with the Turbo kit but I do have another stainless heat shield I could sell for $50 But it requires two bolting points to be made and welded to the turbo dump.

[t04z]

got a pic?

[=premo=]

I'll take one tomorrow for ya, cheers

[=premo=]

Sorry I took the pics but forgot to upload them.

Shield will go free with turbo or listed with turbo on ebay if they haven't sold soon

[=premo=]

GTR head sold

Bottom end, Turbo, wiring, plenum/manifold/throttlebodies and injectors still for sale. Need these bits gone

[=premo=]

price drop $3999 ono for bottom end (with Tomei oil pump, pistons, rods, crank, sump)