Jump to content
SAU Community

Recommended Posts

I have no doubt the manual would be even better though the tip will be better off the mark 90% of the time as there is no driver error, just stomp the gas and whammo, easy repeatable results everytime.

I'm not suprised going uphill you'd smoke an mr2, is it aw11 or sw20 ? An n/a mr2 won't have the balls to keep up with power. It's easier going uphill as you're relying on power.. going downhill you're relying on carrying speed stressing handling characteristics more. It's also more daunting on a driver punting a heavy car downhill due to large tires giving high grip thresholds and that large bulk feeling etc.

E.g. Going on runs with my mate's ek civic with minimal mods, me in a v35 manual coupe 245/275 michelin ps2 tires springs shocks swaybars brembos light weight reduction etc and downhill i'm only tiny bit faster (no speeding in straights, just corner fun). Uphill is just not fair as even 3rd gear torque in the v35 would pull away lol. I consider him a better driver than myself. Had he have the same mods as me he would've completely lost me downhill.

The manual R34's are a lot better :)

As for handling mentioned a few posts ago, I've raced a few of my mates on mountain roads etc.. going downhill my mates NA mr2 (with coil overs etc) would smoke me but going uphill I'd totally smoke him as my car handles like shit going downhill on tight corners, uphill is a different story tho

my mate had a dyno comp at his workshop a few weeks back with the mr2 club. there was one of the older model mr2's there (the ones that are pointy, not the later model rounded shape - i don't care enough about them to know model numbers) and it only made about 80hp. the missus SSS pulsar on the same dyno made 110hp, so i could see how a NA skyline could easily beat it up hill.

Im on my L plates and just recently bought my first car, before I had test drove a 4 speed auto ba falcon xt and it pulled pretty hard, however i also test drove a manual 3.5l magna, one of them vr-x models and it shredded the falcon in every aspect, however it was pretty dodgy so I just left it alone, I ended up getting a manual R31 skyline gxe, It has plenty of power and torque for a first car and they are cheap to, even tho I haven't driven a na r33 I would wager that an R31 with Intake, Exhaust, Mini-spool and Timing to 20degrees would flog any na r32-r33, ive done these mods and it pulls HARD and it would cost you a fraction of the price you would spend on some battered out na r32-33.

The angular shaped ones is the aw11. There were two engine options, a high revving 1.6l and a supercharged 1.6. A n/a line will have alot more trouble against the supercharged aw11 or turbo sw20 (round shape one).

my mate had a dyno comp at his workshop a few weeks back with the mr2 club. there was one of the older model mr2's there (the ones that are pointy, not the later model rounded shape - i don't care enough about them to know model numbers) and it only made about 80hp. the missus SSS pulsar on the same dyno made 110hp, so i could see how a NA skyline could easily beat it up hill.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wideband is worth setting up if only for tuning purposes. I would not mess with the ignition system unless there's a misfire. HKS crank trigger is popular out here for the relatively easily sourced Denso crank sensor, not a bad idea to install as well regardless of power level on a standalone. Boost leak test is worth thinking about. Oil pressure sensor tied to a fuel cut isn't a bad idea either. Getting the tune figured out is a good idea. Without putting eyes on it and getting under it there's no way for us to tell you exactly what it needs but most likely you're down to the last 10% that will make a big, big difference in how happy you are with the car.
    • Doing a refresh of my 33 and can see a few websites stating they sell the entire main carpet for our cars, but they all have generic photos which is fine, i understand they are custom made to order.  Just seeing if anyone has got it done or had any experience with this, as i would only want to do it if the fit and finish was as good as oem https://carmatsdirect.com.au/products/moulded-carpet-or-vinyl-for-nissan-skyline-r33-1993-1998-coupe https://knoxautocarpets.com.au/moulded-carpets/nissan/skyline/skyline-r-33-1993-1998/
    • Any plans for E85? If so, add flex fuel sensor.   I'd probably add in the sensors I mentioned above if the Link will support using them for engine protection. With water pressure, you need to be able to effectively set it that "If temp > X, and pressure = atmospheric, shutdown" as at running temp, you should be able to read pressure in the cooling system. If pressure suddenly disappears, it means the water went some where, and this is a quicker reaction than waiting on water temp to go up (Which, can take a little longer than you'd like, considering it now has to wait for hot air to heat it up) Oil pressure, Oil temp, both would be on my list too if you're looking to add sensors. Wideband O2. And at least one EGT sensor. If you're feeling deluxe, put in individual runner EGTs. Single EGT sensor is more so forget about a specific number, get used to "What is normal EGTs", and then keep an eye on it, if it starts going away from "normal" it's a sign something is wrong (Also, things like the tune can still start going out of spec, but EGTs may not show it, for example one injector starts running leaning, so ECU richens everything up, now 5 out of 6 cylinders are rich, and running cool, with one cylinder lean and running hotter, so it's not perfect) Then there is your other things to look at non sensor related, but you may have already done, or have underway, and that would be things like building a sump for more oil, and better oil control under high G-Forces (Cornering, brakes, acceleration). Basically, the above is worth looking/thinking about, if the ECU can do protective stuff with it, and you continue to use it how you are (Drive it to the track, thrash it, drive home, repeat once every 3 to 4 months)
    • Can also confirm these work a treat for most balljoints and bushes. If you have access to a big rattle gun, they make the job so much easier and quicker, compared to using a socket wrench or shifter on the c-clamp 👍
    • Its sort of street but got used for circuit sprints on account of I never drive it on the road because I dont have the time to spare. So it usage was sits around for months at a time then gets driven either 50 or 250 kms to the track followed by 20 laps followed by 50 or 250kms home followed by stuck in the shed until next time. So yeah neither fish nor fowl. Just dont want to break it on the track as a preference. Hence the fairly short sensor/mod list. Probably more worried about it pinging itself to destruction more so than anything oil related.
×
×
  • Create New...