Jump to content
SAU Community

Recommended Posts

Hi all,

First of all, mods please do not close this thread as I would like this answered asap. Cheers.

First of all, the Northbridge tunnel has traffic cameras used to monitor the flow of traffic, and they CAN get the speed of any car within the sights of the camera/s.

Basically, if you are doing excessive speeds through the tunnel, let's say 60km/h+ over the speed limit of 80km/h, can Main Roads WA refer this footage to the West Australian Police, and can the WAPOL use this footage to either issue a traffic infringement or impound a car under the current hoon legislation?

The reason I ask this question is because a person I know asked me if this is possible (due to where I work, they thought I may know the answer). Now, as most of you are aware, a few months ago, the new speed/red-light cameras were implemented within WA and as far as I am aware, new legislation was passed with regards to the speed/red-light cameras?

Simply put, if you are doing excessive speeds through the Northbridge tunnel, can the West Australia Police confiscate your car under hoon laws?

Cheers, Jace.

P.S. This isn't a topic about hoon discussion, it's just a question I'd like answered as I am quite curious about it.

Link to comment
https://www.sau.com.au/forums/topic/328014-tunnel-traffic-monitoring/
Share on other sites

  • Replies 72
  • Created
  • Last Reply

Top Posters In This Topic

haha yeah thats the only sure way at the moment but as far as i know they only have cc tv cameras in there which cannot be used as evidence against u in court in terms of speed, basically they cannot put speed cameras in the tunnel, i cant remember why though but i could be wrong as its only something i remember hearing

Snozzle is right but there in regard to speeding...burnout and general reckless driving would be another issue. Still there is nothing stopping the Man from tying it on. I expect that given the foolsihness and the consequences of incidents in a tunnel environment that we wont be far away from seeing sped camers in the Poly.

I don't know WHY there are no speed cameras in the tunnel because it's definitely possible. They are all over the tunnels in Sydney, every couple of hundred metres there is a radar on the wall!

f**k I love the sound of a hi-po Nissan in the tunnel :laugh:

They can't do you for speeding in the tunnel based on the camera footage because they don't have a proven scientific approach to proving it. Multinova's and hand helds are a different story because they are approved, but there is no approved method from merely guaging someone's speed based on a video recording. They can "speculate" but then they'd have to prove it, and how are they going to do that? If a copper see's you speeding and pulls you over without evidence, that's a different story because it's your word against theirs. In this case, your mate shouldn't worry about the tunnel speed. Seriously, if it were an issue, there'd be a public outcry already don't you think? Any suggestion of copping a fine from speeding through the tunnel without being pulled over by the po-po, hit by a multinova in or out of the tunnel or such, is just hyperbole and I wouldn't worry. Not that I am advocating speeding through the tunnel, but after all, isn't it WA's safest stretch of road? :laugh:

You'd have more chance of being done by the sound you are creating inside. If there is a cop up ahead of waiting outside they will just wait for you.

And just quietly, antilag is capable of shutting v8's up inside there without having to speed

Nothing quietly about it at all mate, I've had a mate in his S15 w/ antilag sneak up beside me in the tunnel when I had the windows down, start smashing AL, omfg, I couldn't A: get the windows up fast enoug B: stop laughing and C: stop my ears from ringing :laugh: Also bee*r in tunnel is sweet aswel :laugh:

afaik the main reason the tunnel doesn't have cameras is the walls of the tunnel tend to bounce the waves and could interfere with the accuracy of a read out. MRWA do have speed sensing cameras that can determine the speed and do actually show it on their monitors, I have seen a readout.

The real reason MRWA does nothing else is the footage from MRWA cameras are not actually recorded at all, so even if you did 150km/h through the tunnel they wouldn't keep a record of it...some guy in the monitoring station would probably get a laugh though.

How they plan on pinning you through the tunnel is with average speed cameras at either ends, afaik they should be operational by now. These would average out the speed you do in the tunnel to see if you have exceeded the 80km/h on average.

What I'd like to know is, if it's because of the radar signal bouncing around and shit, why aren't they planning on using the SAME gear that the Sydney tunnel owners have been using, and works. Beurocratic crap if you ask me. Everything has to go through a process, then testing, then legislation, wasting more tax payers money etc etc whereas they can't just use the same thing that others are using to do the job.

just drop it back to second, youll only get to like 110 and still make all the right noises :D

Just do it late enough you can literally stop at one end, and then hammer it. If you've got a reasonably linear accelleration curve you can be doing 160 before your speeding, by any average measure=D

Plus, it'll sound awesome.

Might want to let them know not to anymore.. as there are now radars in the tunnel :) no idea if they are issuing fines or just trialing them, and they weren't there yesterday. Heading home from work this arvo, east bound through tunnel, detector goes mental as soon as I enter (never has there before), ~100m in on the right-hand wall was a radar like the ones they use in NSW. About half way through was another and then a third one about 100m before the exit. No idea if westbound has them yet but I'll find out on Monday heh.

Without having seen them or finding any press release about them, with 3 within 1.6km they could likely be point-to-point cameras??

They are definitely radars, they look identical to the ones in the tunnels in NSW.

The point-point cameras I have seen sit up on big trestles over the roadway with one at the start and one at the end, multiple cameras covering all lanes, no radars.. they just compare the time it saw your plate go through the first one to the time it saw you go through the second one.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • 2 spots that my exhaust guy joined the 2 pipes together  Made a big difference. I'm now able to live with it. I can make it louder if I want by removing the HKS caps.
    • Hi all, considering clutch upgrade to support 1130 engine hp from 1650cc injectors on e50 at 85% duty cycle (1650 x (11.85/14.7) x 85%). Narrows down to these three as they can be converted to use gm 26 spline input shaft if I ever want to use transmission with that input shaft (orc1000f and r3c easy/cheap just change center hub; tr2cd pricier must change clutch discs). Pricing orc1000f similar to tr2cd, r3c about usd 200 pricier. Orc1000f triple plate 200mm. Tr2cd twin plate 215mm. R3c triple plate 215mm. Claimed max torque : orc 1000f 723 lbs ft; tr2cd 800 lbs ft; r3c 1100 lbs ft. Why orc1000f triple plate but claims lower max torque vs tr2cd twins? Is orc1000f underrated? Any info maxing out these clutches? Info on street/traffic driveability/pedal feel? Thank you for any info on them.
    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
×
×
  • Create New...