Jump to content
SAU Community

Recommended Posts

Hey guys,

my brother is putting me to work soon on his 32's boot. First i'm going to dynamat the whole inside of the boot but then he wants a audio setup through the back he does not mind if there is no access to the spare wheel ( as he hasn't even got one ). So i just need a bit of insperation if u could post below a Photo of your setup and maybe give me just one paragraph of what u have done and what equipment is included. Just a quick run down of the car.

Its a R32 M-spec, has nothing in the boot at the moment so its empty as can be, has got leak in the lights but will be fixing the seal when i start on the boot. battery is still at the front of car.

Also we dont mind if there is no extra space in the back. as we barely ever use the boot. And we don't even use it for storage its just there for show

anyway guys hope to hear back from you soon and see lots of nice setups

Link to comment
https://www.sau.com.au/forums/topic/328181-your-boot-setup/
Share on other sites

http://www.skylinesaustralia.com/forums/R3...ld-t328138.html

The center bottom panel lifts out and still has the factory spare wheel and jack.

How much did that setup set you back? ( cash wise ) and how long did it take to install

Link to comment
https://www.sau.com.au/forums/topic/328181-your-boot-setup/#findComment-5337101
Share on other sites

How much did that setup set you back? ( cash wise ) and how long did it take to install

So far $2.5k, all DIY. I only get to work on it after hours so like 2-3 hours a night on the nights I do get off, been slowly chipping away at it for about 2 months and almost finished.

Link to comment
https://www.sau.com.au/forums/topic/328181-your-boot-setup/#findComment-5337116
Share on other sites

So far $2.5k, all DIY. I only get to work on it after hours so like 2-3 hours a night on the nights I do get off, been slowly chipping away at it for about 2 months and almost finished.

.

looks difficult as. thats the thing im worried most about. but i definatly like it and im sure my bro will to.

So your actual boot works as sort of a sub box. thats why the backends of the subs are facing in ?

Link to comment
https://www.sau.com.au/forums/topic/328181-your-boot-setup/#findComment-5337146
Share on other sites

Not particularily difficult. Just time consuming to make sure it all works the way I want and prevent rattles. Google "inverted mount subs", the back of the subs is facing out purely for aesthetics, as the magnets on eclipse subs are massive (the subs are 10"s) so I preffered to invert mount them as they look better. There's a box built into the front of them above the fuel pump/below the parcel shelf that attaches to the first front panel, and the subs then seal into that. I'll upload some more pics tonight and you'll see what I mean.

Link to comment
https://www.sau.com.au/forums/topic/328181-your-boot-setup/#findComment-5337182
Share on other sites

Not particularily difficult. Just time consuming to make sure it all works the way I want and prevent rattles. Google "inverted mount subs", the back of the subs is facing out purely for aesthetics, as the magnets on eclipse subs are massive (the subs are 10"s) so I preffered to invert mount them as they look better. There's a box built into the front of them above the fuel pump/below the parcel shelf that attaches to the first front panel, and the subs then seal into that. I'll upload some more pics tonight and you'll see what I mean.

ok thanks man.

Anyone else wanna show of their boot

Link to comment
https://www.sau.com.au/forums/topic/328181-your-boot-setup/#findComment-5337226
Share on other sites

My setup is pretty simple but does the job and its pretty neat..

I bought the moulded sub boxes off ebay for $80 each

I can still use the boot, just need to order in some covers for the subs, they are the Alpine Type R's 12"

:)

In regards to rattles, I glued some rubber to the back of the number plate and thats pretty much done it for me..

P.

gallery_71124_3865_44618.jpg

gallery_71124_3865_22749.jpeg

gallery_71124_3865_58712.jpeg

Link to comment
https://www.sau.com.au/forums/topic/328181-your-boot-setup/#findComment-5337485
Share on other sites

You guys should see how awesome my boot is. current set up is awesome. it's light weight and flexible. It's currently empty. Unless it's full of shopping, or full of bags when I go away for a weekend. It's an expert set up. I love it. I could even throw a couple of chopped up dead bodies in the boot :D Better than 7 subs i reckon :blink:

Link to comment
https://www.sau.com.au/forums/topic/328181-your-boot-setup/#findComment-5347165
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nissan/Pitwork is fine stuff. HKS is just marketing wank. I personally wouldn't do the idler if it is already new. If it looks and feels fine, it is fine. But as D says - it's cheap to add it to the job. The water pump ditto. Even more so. If it show no signs of problems, then it is nearly new - leave it.
    • 1. I can't see a location on your profile but you do mention GBP so I'll assume you are in UK. In Australia, CBC make a timing belt kit with the gears and idler and tension bearing and that is what I use without any problems. I'm sure OEM or HKS are also fine but I wouldn't pay extra for HKS over anything else. 2. Yes, I would always change the idler and tensioner and the stud and bolt that hold them in. Assuming they were all done last time it is highly unlikely you would have a problem, but they are very cheap to add to the job considering the time it will take anyway.  3. No, you don't need to lock them as such (I think that is more for engines without timing marks), but you should make sure they move as little as possible once the belt is off as you can hit pistons on valves if they move too far. As always, make sure you line it all up to top dead centre with the timing marks aligned before you take the old belt off.
    • How to wreak havoc at a bogans party... Swap out the goon bag hanging from the clothes line with oil bag... Watch chaos ensue during Goon of Fortune....
    • Hey everyone,   I’m looking for some advice on replacing the timing belt on my RB25DET Neo-powered 1998 Skyline. The engine was fully built about five years ago, including a fresh timing belt, water pump, and other essentials. However, since then, the car has only covered around 2,000–3,000 miles. It’s currently making around 650hp.   Even though the mileage is low, I know timing belts have a time-based lifespan too, and most recommendations suggest changing them every five to six years or 50,000 miles. Since I’m at that time mark, I’d rather not take any risks and plan to swap it out soon.   A few things I’d like to hear opinions on: 1. What’s the best belt for this setup? Should I go with an OEM Nissan belt, or is the HKS fine-tune a better choice given the power level? 2. Would you bother replacing the idler pulley and tensioner at the same time, or only if they show wear? 3. When swapping the belt, is it necessary to lock the cam and crank gears in place, or is lining up the timing marks enough? I’ve seen different approaches, and I want to make sure I do it right.   The water pump was changed with the rebuild and isn’t run off the timing belt, so I don’t see a need to replace it again. I just want to make sure I approach this the right way.   Any insight would be much appreciated. Thanks!
×
×
  • Create New...