Help And Parts Needed Asap

[skyline_freak_r33]

Hey guys,

I'm nearing to the end of my conversion to turbo.

I need a few parts by Saturday

R33 S1 or S2 speedo manual and low k's!

R33 dump pipe(Stock or aftermarket anything cheap!)

R33 front pipe (Stock or aftermarket anything cheap!)

R33 exhaust (Stock or aftermarket anything cheap!)

Also if anyones free tomorrow for a few hours and knows how to remove an R33 wiring loom and remove rear 5 stud hubs let me know

I have a bottle of red label for anyone who wants to help

The dash surrounding has already been removed and the engine plugs have been removed. the dash just needs to be removed and unplugged. Also the rear 5 stud hubs have to be removed (Just the 5 stud hub not the rotors or calipers)!

Cheers

[Madaz]

why you need Speedo just keep yours in and get an aftermarket boost guage

[skyline_freak_r33]

why you need Speedo just keep yours in and get an aftermarket boost guage

thats true isn't it

but then if i was to change the engine loom over does that still mean i can still run the old speedo off it?

[Aberax]

R33 S1 or S2 speedo manual and low k's!

R33 dump pipe(Stock or aftermarket anything cheap!)

R33 front pipe (Stock or aftermarket anything cheap!)

R33 exhaust (Stock or aftermarket anything cheap!)

I have an aftermarket 3" front/Dump pipe I will sell you for $100

[Damo_R34]

you regretting the conversion yet?

[skyline_freak_r33]

Nah not really

I will do a progress article on it

you regretting the conversion yet?

[r33 chris]

hope ur engine last's man

[Madaz]

speedo looms are the same RB25de det RB26dett across the R33 range

[skyline_freak_r33]

hope ur engine last's man

cheers chris

speedo looms are the same RB25de det RB26dett across the R33 range

ok. thanks for that at least i know now

so how does the psi show up on the turbo ones?

[DamageInc]

cheers chris

ok. thanks for that at least i know now

so how does the psi show up on the turbo ones?

dont even bother with that useless shit on the dash

just get a boostgauge

[Madaz]

correct get an aftermarket boost gauge

i have one once i install my new one

[Shazza24]

cheers chris

ok. thanks for that at least i know now

so how does the psi show up on the turbo ones?

Your boost readings come off the plenum via a little black hose that goes to a little black box in engine bay on drivers side near firewall.

Edited July 12, 2010 by Shazza24

[DamageInc]

Your boost readings come off the plenum via a little black hose that goes to a little black box in engine bay on drivers side near firewall.

can come off many parts of the engine

best way is putting a t piece in the front of the plenum near where the fpr line goes

ill pop round on Saturday and help Adrian hook everything up