Jump to content
SAU Community

R33 Gts-t Turbo Installation Perth.hi Guys, I Was Just Wondering If Any Of Yous Know Of Any Good Places To Get Turbos Installed Into R33 Gts-t's? Mo

fabb

By fabb,
in Western Australia

 Share

Recommended Posts

fabb Apprentice

fabb

Posted
Posted

Hi guys,

I was just wondering if any of yous know of any good places to get turbos installed into r33 Gts-t's? money wise and reliability wise.

Also any places in perth to purchase turbos of that nature?

thanks alot guys!

(ps im sort of a "noob" at all this car stuff)

XxNinjaxX Collaborator

XxNinjaxX

Posted
Posted (edited)

all the big name performance shops.

C-Red, hyperdrive, imports 101, allstar garage just to name a few i'd say KYP would be your cheapest option, they are really good too!!

Edited by XxNinjaxX
lachlanw Veteran

lachlanw

Posted
Posted

bit more info might help

it the car a non turb and you want to turbo it

is the car factory turbo and you blew up the turbo and need to replace it with aonther factory one

^ ^ ^ ^ and you want to fit a t3t4 or some other ebay shit to it

^ ^ ^ ^ and you afr fitting a kit like the hks gtrs kit to it

also a rb25det only has one turbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • stewart1
      How To Fix Tacho, R33 (maybe)

      By stewart1 · Posted

      Here is the before and after of the scraping/sanding of the IC pads on the tachometer board for the fix mentioned in this thread. And yes it worked fine after. Just a note if you change any components on the board the tach calibration can be wrong showing the wrong idle etc...only problem is once it is installed back in the cluster you can't get to it to adjust...ouch! My fix was to cut out the calibration pot (the blue one) from the board and run it with two wires to the fuse panel under the dash where I could adjust the idle calibration once everything was installed. And yes I soldered everything up again including the half soldered components either side of the IC in my photos                                
    • PotatoCake
      Oem radio & steering wheel shroud for r33 (vic)

      By PotatoCake · Posted

      After an excellent condition, working! oem radio for a 97 r33 And the steering wheel shroud/cover as mines a little bit scratched up Am in Melbourne
    • PotatoCake
      Exhaust silencers/varex exhausts

      By PotatoCake · Posted

      So my exhaust is loud and sounds awesome (good thing) but also is very loud when coming and going, dont want to piss off the neighours etc Are the varex adjustable mufflers any good? I contacted them but they dont make r33 specific exhausts Ive also see the adjustable inlets on this site but apparently they might restrict airflow too much which wouldnt be good for the engine. Would prefer something thats adjustable from in cabin so i can change it on the fly, dont really want to put in one of those permanent exhaust tip things.  Any other recommendations would be appreciated!
    • MBS206
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By MBS206 · Posted

      You don't need to lean as far to pour the oil in, or change the spark plugs either 😛
    • Duncan
      R32 Sedan - Grip and Drift (have my cake and eat it too build)

      By Duncan · Posted

      Indeed, it is much easier to get at the filter with the engine on a stand
×
×
  • Create New...