Jump to content
SAU Community

Recommended Posts

Got a few random bits lying around up for grabs. Prices firm.

1) Custom Hand Made Catch Can. $50

Not the sexiest looking thing but it was made specially to have 2 inlets, internal baffles running down to drop the oil and back then up for venting. Comes with breather and pirtek fittings and bits of hose. Mounting plate to sit on back of firewall with factory screw location.

2) Radiator Deflector $45

Bought from Just Jap and was fitted to S1 R33. A little out of shape as I had to bend it to fit my rare aftermarket grill.

3) Whiteline Rear Camber Kit KCA347 $80

Brand new. Never fitted. Comes with instructions, grease and 4 bushes.

4) Turbo Tech Bleed Valve $10

Bought but never fitted. It's missing a spring and ball?

5) Steering wheel. $45

Brand new. Never Used. 32 cm wide. Faux carbon look.

6) S2 Wing. $15

Resprayed in 2pak Black (non met) but got scratched in storage. Details as per pics.

7) Sunroof Glass with lining and bits. $30

Has some rust but easily fixed for a spare as these are hard to come by.

Contact Justin 0406 370 292

Please SMS/call for quick response as hardly check site since car sold.

post-19529-1278828092_thumb.jpg

post-19529-1278828131_thumb.jpg

post-19529-1278828197_thumb.jpg

post-19529-1278828233_thumb.jpg

post-19529-1278828274_thumb.jpg

post-19529-1278828408_thumb.jpg

post-19529-1278828458_thumb.jpg

post-19529-1278828484_thumb.jpg

post-19529-1278828535_thumb.jpg

post-19529-1278828612_thumb.jpg

post-19529-1278828651_thumb.jpg

Do you know how much camber the kit gives? Does it have an install guide and is it DIY to remove the old and in the new?

Hey there,

Sorry for late reply as I don't check site too often. If you need quick reply, call or SMS. The kit comes with instructions and is pretty straight forward. A single kit will you .75 reduction in camber if you do the inner and outer upper control and radius arm.

Hope this helps.

Cheers,

Justin

0406 370 292

Hey there,

Yup, still have it. Give me a call if you want to come buy and pick up. Best call as I haven't checked the site till now since posting the ad. Location is in Kensington

Cheers!

J

0406 370 292

Got a few random bits lying around up for grabs. Prices firm.

1) Custom Hand Made Catch Can. $50

Not the sexiest looking thing but it was made specially to have 2 inlets, internal baffles running down to drop the oil and back then up for venting. Comes with breather and pirtek fittings and bits of hose. Mounting plate to sit on back of firewall with factory screw location.

2) Radiator Deflector $45

Bought from Just Jap and was fitted to S1 R33. A little out of shape as I had to bend it to fit my rare aftermarket grill.

3) Whiteline Rear Camber Kit KCA347 $80

Brand new. Never fitted. Comes with instructions, grease and 4 bushes.

4) Turbo Tech Bleed Valve $10

Bought but never fitted. It's missing a spring and ball?

5) Steering wheel. $45

Brand new. Never Used. 32 cm wide. Faux carbon look.

6) S2 Wing. $15

Resprayed in 2pak Black (non met) but got scratched in storage. Details as per pics.

7) Sunroof Glass with lining and bits. $30

Has some rust but easily fixed for a spare as these are hard to come by.

Contact Justin 0406 370 292

Please SMS/call for quick response as hardly check site since car sold.

Bushes sold. Everything else still available.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Here is a recipe. Sonic blocks till you get one that has a good enough bore. Get a torque plate and block brace, use your choice of fasteners (arp ect) bolt the thing together empty, half fill it and let it cure. Release it when it has, go to a REPUTABLE RB Builder and get the thing line bored/honed and cylinder honed to size, then wash. Once its all clean and dandy, wash and blow it out again. Then again.  Assemble said engine to your desired clearances with oil control mods, gasket to suit desired CR/Squish ect. Attach your extended sump with proper trap door oil baffles and head drain plumbed to sump with a SUMP BREATHER SYSTEM. Build your front diff with a decent LSD, rebuild your transfer case with a few extra plates, more than likely replace your tailshaft centre bearing and tighten up the rear diff. Tune to minimise excessive midrange cylinder pressure (timing unless you like to split bores and rebuild engines) Enjoy your engine, but hate the fact you are now destroying engine mounts, gearboxes, gearbox mounts, diff output flanges and driveshafts, diff mounts, tailshafts and front CV's.   Disclaimer.... Ive never done any of the aforementioned stuff.......
    • 440s will support well over 400HP on petrol, which is a decent place to be for an RB20. 230+rwkW. Will be a safer bet for idle/low load. 550s would be nice for the extra headroom. I've made the same decision with mine (Neo25). 1000s are probably too big for the Nistuned ECU, so I have some smaller ones.
    • Appreciate everything guys. I did go ahead and get an alignment... most of my complains are solved. Car is not perfect, but it's good enough. If I notice uneven tire wear or anything I'll just take everything back to stock.  Thanks again!
    • They still have not shipped the 550cc injectors as they weren't in stock, so in theory I could ask to get the 440cc ones instead, if those work better in my scenario. They're the same price so really shouldn't be an issue. Unfortunately I am not so knowledgeable in most parts of tuning so I wasn't sure what's best to choose between the two. 440cc ones are the lowest they have (not in stock, but available to buy nonetheless).
×
×
  • Create New...