Jump to content
SAU Community

Recommended Posts

If by internals you mean the interior im pretty sure your dash and seats are good for 800hp however after that they tend to spontaniously combust at random..

And you will also need to change your guages, its a good idea to put them on the bonnet as well

And you will most definately need racing harnesses that dont clash with your flame suit...

Edited by Arthur T3
Link to comment
https://www.sau.com.au/forums/topic/328468-new/#findComment-5340282
Share on other sites

If by internals you mean the interior im pretty sure your dash and seats are good for 800hp however after that they tend to spontaniously combust at random..

And you will also need to change your guages, its a good idea to put them on the bonnet as well

And you will most definately need racing harnesses that dont clash with your flame suit...

i have race seat and harness already and i have AVC-r plus gauges lol 800hp i thought 1000hp hahahaha

Link to comment
https://www.sau.com.au/forums/topic/328468-new/#findComment-5340351
Share on other sites

Yeah i thought it would handle 1000 too till myt guages exploded and I burst into flames oneday for no apparent reason,.maybe i had a nawz leak...This is why i stress the use of a quality flame suit... :banana:

If 450 can be acheived safely then its safe to say you could no doubt squeeze 500 out of it..

But like i said before how long do you want it to last..If you got the money just do it...

Link to comment
https://www.sau.com.au/forums/topic/328468-new/#findComment-5340365
Share on other sites

Yeah i thought it would handle 1000 too till myt guages exploded and I burst into flames oneday for no apparent reason,.maybe i had a nawz leak...This is why i stress the use of a quality flame suit... :banana:

If 450 can be acheived safely then its safe to say you could no doubt squeeze 500 out of it..

But like i said before how long do you want it to last..If you got the money just do it...

With all the supporting mods, a ZOOM feature car made 630rwhp from an internally stock RB25 neo.

But it won't last at all. For reliable power, I'd suggest no more than 450.

It also depends how your engine makes this power (boost, fuel type, headwork/cams etc).

i.e. 20psi from a GT3076 compared to 15psi from a GT3582, obviously 15psi puts less strain on the motor's internals.

Link to comment
https://www.sau.com.au/forums/topic/328468-new/#findComment-5340394
Share on other sites

KYP have warned me not to push my engine past 350rwhp if I want it to be reliable. Things are starting to feel the pinch at that stage. You could probably push 400-450, but I would be nervous every time I hit full boost at that power level on standard internals...

Link to comment
https://www.sau.com.au/forums/topic/328468-new/#findComment-5340433
Share on other sites

Live life on the edge boys, if your engine aint on the verge of shooting a rod you aint living.

I like this thread.

Right on,

It gunna cost 10-15k just for supporting mods, so if it does blow 2k for another engine is poo change..

turbo 2000+

injectors 1000+

top mount manifold 1500+

cooler 1000+

exhaust 1000+

inlet plenum 1000+

coilpacks 500+

Ecu+ tuning 3000+

Clutch 1000+

other assoretd bits n pieces that you never factor in to your original budget 2000+

Punching a hole through your block and having oil and coolant spew out all over the road in spectacular fashion while showing off in front of your mates....

PRICELESS :banana:

Link to comment
https://www.sau.com.au/forums/topic/328468-new/#findComment-5340655
Share on other sites

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • It's kind of interesting - They definitely do builds that split the difference between what they like and what will generate views and engagement. The NC Platform always surprises everyone in a good way, in an uncomfortably good way some may say. They could throw a LS in there and arguably have the best (and best performing) car of the entire stable. But that isn't necessarily what draws views, because people viewing don't want to accept the vegetables of a LS NC MX5 being a superior vehicle in every way (including fun) than a RB26 240Z. This is also why there's not a lot of content about the GR Yaris (on the web in general). They're too good, yet 'only a Yaris' The community doesn't want certain cars to be as good as they are - to beat their hero cars, and I believe the NC MX5 is absolutely one of those cars.
    • Yeah - My key still does the chime thing. I followed the procedure but it didn't activate on the (identical) third set of keyfob that I had. I vaguely remember the alarm saying you can only pair two keys with it. Now that I've dug it up, it appears that you very much can pair keyfobs to the alarm system. (which are the fobs I use to unlock the car). I have successfully diverted the thread and can probably not use the OEM keyfob ever again unless I use the aftermarket alarm and attempt to pair the OEM keyfob to it. Which might just work, or not :D. I definitely used the nissan method and not the aftermarket alarm method.
    • What makes it worse is that Nissan made keys in the same style, for example R34 and Stagea, but they work at different frequencies or something like that. So they look the same but the remotes are not interchangeable. I learned that from some guy selling aftermarket blank keys.
    • Does your door chime work when you have the key in the lock and open the door? I've had that disabled because it's f**king annoying and it is one thing that messes with the pairing. Because now the car doesn't detect key in ignition anymore and the slide-key-in-and-out sequence does not trigger the pairing mode anymore. The service manual has a section on the various bits involved in doing the syncing. I presume it'll be similar between Stagea and R34.
    • Agree, but meh, I think is is based more on LOLS than actually apples to apples, like, who would have thunk a turbo 4 cylinder would not beat a NA 4 cylinder  I think with just basic N/A mods, like a exhaust and tune, it would be equal to the Mini in its current form, maybe I know my current 2.5 would "chop the mini" as the midrange now has a night and day difference in power delivery compared to the tuned 2.0, by around 20kwatw and 30nm from around 2k rpm "ish"....... I'm kinda hoping that they do a N/A build, either with the MZR 2.0 or with whatever they decide to use If I recall correctly they did talk about K swapping one a while ago
×
×
  • Create New...