Jump to content
SAU Community

Recommended Posts

Hi Guys, just got myself some RB74 from DBA and also, some printed instructions on how to properly bed the pads. The RB74s are notoriously famous for squealing but I had no problems with it after following the guide. Thought I share it with you all because I am pretty sure that its applicable to all new pads. :(

-------------------------------------------------------------------------

BEDDING IN INSTRUCTIONS

1. Install disc pads and check fit.

2. Pump brake pedal until pedal is hard.

3. Perform 2 stops from 50Kph to 20Kph with medium pedal effort.

4. Perform 6 stops from 110Kph to 70Kph with high pedal effort.

5. Drive vehicle for 10-15 minutes at 70 to 100Kph without using the brakes to allow them to cool

6. Park vehicle and allow brakes to cool to ambient temperature.

DO NOT STOP VEHICLE WHEN PADS ARE HOT DURING BEDDING.

THIS WILL SEPARATE THE PAD FORM THE BACKING PLATE

Bedding should not be performed until disc rotor has been bedded.

The disc pads will smoke and smell whilst bedding.

-------------------------------------------------------------------------

btw, the pads rock!! :( They grip very well and even after a very hard drive with equally hard braking involved, i hardly noticed any brake fade at all.

cheers

glenn

Link to comment
https://www.sau.com.au/forums/topic/32849-brake-pads-bedding-in-instructions/
Share on other sites

I just had new discs/pads put on my '32 and was wondering (if it's not too nosy) what you guys paid for your pads, coz i had to skimp a bit on the pads after paying for the discs, and they don't seem to be doing as good a job as the ones i took off ! any thoughts would be great..

cheers, phil

My car had RB74s on it when i got it and they work really well, i have white wheels and have just given up on keeping them clean. Anyway, brake dust is the sign of a true street racer, or so ive heard. ;)

I also just got my discs machined for $100 the lot, after i could hardly keep my foot on the brake pedal as it vibrated so much. Work awesome now, almost forgot what it was like to be able to stop quickly.

PS how much were the RB74's?

My RB74's started to squeel a bit after about 1000ks when braking slowly from about 10ks to zero but other than that all good.

They do start to fade after alot of punishment, like midway through a runup the Old Pacific Hwy but even then they feel better than the dodgy stock pads

Greg, you will be able to find more info on RB74s and other pads as well on this thread. Dun worry about the RB74s, they dun chew into the disc but damn dusty.

http://www.skylinesaustralia.com/forums/sh...ead.php?t=32932

  • 2 months later...

I use RB74 purchase from http://www.racebrakes.com.au/. Ever since I have them until now, which is like 10 km's. Its still make a horrible squeakie metal noise when stopping. Could someone advise me what to do or check? By the way I got a mate to install its, but i don't think he bedded !!!

Looking at the RB74 brake pad, i do see alot of chunk of silver + gold metal particles on the pad itself. It's that normal or i just got a faulty one? Compare to my original pad, it's much more finner particles, it's that why it squeal more noise than the original brake pad?

  GTB055 said:
By the way I got a mate to install its, but i don't think he bedded !!!

The RB74's need to be bedded in really REALLY well, call racebrakes and ask for the bedding in instructions.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok guys thank you very much. GCG highflow it is then 🙂 
    • forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
×
×
  • Create New...