Jump to content
SAU Community

Remapped Ecu

1MP0R7

By 1MP0R7,
in General Maintenance

 Share

Recommended Posts

1MP0R7 Apprentice

1MP0R7

Posted
Posted

hi all the other day my mate gave me a remaped ecu that was done at turbotune from his r32gtst, our cars have very similar mods but 1 thing is it works better in his r32 than it dose mine. so my question is do i have to take the car for a run on open road so it can adjust to my mods???

Link to comment
https://www.sau.com.au/forums/topic/328579-remapped-ecu/
Share on other sites
RandomHero83 Veteran

RandomHero83

Posted
Posted

It won't just auto adjust. similar mods or not it will need to be tuned to your car. Something as simple as different spark plugs or a different level of spark from the coil packs can make a difference, this combined with a difference of air flow and exhaust it all add's up and before long similar turns into a totally different tune being needed. Take the time to do some research on who offers the best tune for the ECU you have and spend the cash on doing it properly or you'll regret it down the road.

Do I get bonus points for saying different a million times?

Link to comment
https://www.sau.com.au/forums/topic/328579-remapped-ecu/#findComment-5342320
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      MLR's Bogan cruise ship

      By Kinkstaah · Posted

      When wing then?
    • Triple OG
      RB26 Block Filler rigidity/deflection test

      By Triple OG · Posted

      I didnt present too many conclusions because I wanted your opinions and feedback based on your own experiences. I don't know the exact material, but it is similar to concrete and therfor only has valuable strength in compression. The forces on the set material once the head is removed would mostly be in compression since the grout wants to retain its shape and the block wants to return to its relaxed state since it's still within the elastic region. The grout would theoretically make the block more rigid. The exact amount would take a better setup on my end. Thought experiment: Instead of aliens, twist your favorite fleshlite. Now fill it with grout and allow it to sit for a week. Now try to twist it again. Observe what you see. Now get your other one and blow into it. Observe what you see. Now put it into a can and fill the space between your fleshlite and the can. After it sets blow into it. Less movement in torsion and less expansion i hope.   
    • Kapr
      R34 RB20DE NEO coilpack?

      By Kapr · Posted

      Hi. Yeah i think that DIS-008 should be ok too but i rather asked. The R8 coils are "sadly" no go for me cuz every solution is for forward plenum. The coils are too tall and one of the(4/5 DK) would not fit under stock J-pipe. And being this NA RB20 i dont even know where to get some forward plenum.(and of course i would need other stuff like custom AFM/ECU etc) and that is kinda non sense for NA without boost. I just looking for solutions for my case 🙂  I try look into those Yaris/Corolla ones.  
    • The Bogan
      HY51 Fuga Hybrid

      By The Bogan · Posted

      Damn it, no, I topped up before I got to yours I really should look at Costco locations more when I'm out and about burning through fuel
    • MBS206
      HY51 Fuga Hybrid

      By MBS206 · Posted

      Did you hit the one 5 minutes down the road from my place before heading back south? 😛
×
×
  • Create New...