Jump to content
SAU Community

Recommended Posts

hey guys went to see a couple of supras today, dont worry im a gtr fan but p plates restrict me from buying one. Anyway the car i was looking at the exhaust was blowing white smoke i gave it time to warm up and was still blowing white smoke when pushing the accelerator down? what can be the cause of this im guessing clearly its not a good sign? also when looking for imports what are some good indications of how the car has been treated if the kms are legit? etc.. ? thanks guys any help will be appreciated.

Link to comment
https://www.sau.com.au/forums/topic/328624-buying-a-car/
Share on other sites

white smoke? indicates piston rings are worn... not a good sign

good way to see is get him to start it cold, say when u want to see it dont run it before u get to his house, so u can see what its like to start

see how long it takes to start the car with the key, if it turns over for ages to start its not a good sign, a quick ignition is a good sign

when the car is running when warm, open the oil filler cap and see if any blowby is coming out, maybe get ur mate to rev the engine a bit to see the blowby, blowby is bad

check the chassie for cracks and suss repairs

check the sump for bog (if people stack over a gutter, they might bog the sump up to hide damage, ive inspected a car with this done to it)

Link to comment
https://www.sau.com.au/forums/topic/328624-buying-a-car/#findComment-5342512
Share on other sites

the kms are never legit, that's part of import life im afraid. i read somewhere ages ago, before i bought my gtt, that the cars are often wound back 60000km, not sure how they knew that though...

hey clutch, will the blow by just look like sooty crap coming out?

Link to comment
https://www.sau.com.au/forums/topic/328624-buying-a-car/#findComment-5351527
Share on other sites

There are so many things to come in to play when buying a car.

You should really get hold of a workshop manual for the car and read towards the bottom of the manual. It will come up with common problems on the car and the symtoms and fixes for all these electrical and mechanical problems. These are a guide line too helping you with getting a car thats running well.

Its the best way because you will forget to check somthing while you are there, guaranteed!

Link to comment
https://www.sau.com.au/forums/topic/328624-buying-a-car/#findComment-5355264
Share on other sites

  • 4 weeks later...

My R34 blows white smoke and its because im missing a certain part in my Catconverter :blink: , at least i know its something i did thats causing that to occur and its not harming my car only the enviroment and anybody who want to hang around the back of it while its on. I suggest you leave that supra where it is at the dealer, my mates a mechanic so i had him check out my car before buying. Strongly suggest you do the same.

Link to comment
https://www.sau.com.au/forums/topic/328624-buying-a-car/#findComment-5400399
Share on other sites

white smoke? indicates piston rings are worn... not a good sign

good way to see is get him to start it cold, say when u want to see it dont run it before u get to his house, so u can see what its like to start

see how long it takes to start the car with the key, if it turns over for ages to start its not a good sign, a quick ignition is a good sign

when the car is running when warm, open the oil filler cap and see if any blowby is coming out, maybe get ur mate to rev the engine a bit to see the blowby, blowby is bad

check the chassie for cracks and suss repairs

check the sump for bog (if people stack over a gutter, they might bog the sump up to hide damage, ive inspected a car with this done to it)

on supras the main cause is valve steem seals, not really piston rings. two of my mates own turbo supra pushing out bulk power and they both blow white smoke due to valve steem seals. Changing the oil will stop it for about 2,500km and then it will start again.

do a compression test on each cylinder. gives you an accurate reading of warn piston rings.

Edited by BenSm
Link to comment
https://www.sau.com.au/forums/topic/328624-buying-a-car/#findComment-5402806
Share on other sites

the kms are never legit, that's part of import life im afraid. i read somewhere ages ago, before i bought my gtt, that the cars are often wound back 60000km, not sure how they knew that though...

hey clutch, will the blow by just look like sooty crap coming out?

when u open your filler cap IF THERE IS blowby then it will just be smoke, not soot

Link to comment
https://www.sau.com.au/forums/topic/328624-buying-a-car/#findComment-5402822
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • OK, well, in that case, the suspension specialist is either a moron, or you aren't understanding what he was trying to tell you. Nismo arms are not really different than stock arms. Both are fixed geometry. I don't know if the Nismo ones are a little shorter than the stockers (or perhaps even a little longer) or the same length, but....if you swap from stock to Nismo, whatever happens to one side will happen to the other side. It will not cause it to steer left or right. That is unless you have adjustable bushes in your stockers, and they happen to be adjusted to dial out some bent chassis shenanigans. But, if that were the case, you'd just put adjustables in the Nismo arms anyway, because Nismo arms are essentially just expensive stock arms. And doing a wheel alignment is just a weekly thing in my world. I have had the suspension apart so many times this year that I've lost count and just about worn out a torque wrench. I'm out in the shed right now cutting up some alloy section and making bases for my new stringline setup. Got to make new swivel plates next, then I'm good to do toe properly, as well as camber and bump steer.
    • Yeah, nah. Not a thing. The gasket between the top of the plenum and the runners is far more likely to blow out when it gets old, and not really at ~14 psi. These things have been run to double that for 30 years without that being a common thing.
    • I plan to pull the intake manifold off and check the gaskets, i read that the block to manifold gasket can blow over 14psi and when i picked up the car it was set to 1.2bar on the controller. Send the injectors out for cleaning. Ill also pull the cam covers off and do an inspection, check some valve lash. Someone also said that the timing belt can rub or vibrate against the belt cover and make that sound. Definitely need to get an AFR gauge on it, if it was lean idling im sure it wont be happy
    • Well, it is an unusual noise. Use a 2 foot long bit of garden hose stuck in your ear as a stethoscope to pin it down to a definite location. We'll never work it out across the internet.
×
×
  • Create New...