Jump to content
SAU Community

Recommended Posts

Yes. they were the one's that were good enough to record the car's current PB of 9.38 @ 152.25mph.

I have photo's, but they are over the 100kb limit here.

If you want them, give me your e-mail address and I will forward them on.

Just going for a different setup...and I'm tired of dealing with speedshops who want your money, but don't earn it.

Yes I will separate...if you can find someone else to buy the other one.

More or less buy both and sell one or share the purchase with another.

I would have thrown one on the REX if I was going to keep it. But I've just detuned it to sell....no more coilovers, mags, APS kit etc. back to almost stock.

This is the time to meet me on the street, when it's only half a weapon....it's all good fun though....there's a time and place for everything.

Have fun, live to enjoy life.

I have a td06-20g on my rb25det and its the ducks nuts. Been for a drive in my mates gt30 equiped rb25det and it's fast too but my car pulls harder and stronger and keeps pulling to the rev limiter, 7500rpm, we are considering taking it up another 500-1000rpm :D

do you have manifolds and dumps to suit the kit? if so im intrested on the whole deal. i have a near new hks T51R kit for a gtr if you want to do a trade deal or something down the line. its made over 720hp at all four wheels out off it on 28psi so im looking for some more power.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How much have you lowered?  I had 350Z springs in the rear and was able to pull the camber into factory spec with the factory arms on the rear, obviously the front ran negative camber as it isn't adjustable, but rotating the wheels regularly evened out the wear.
    • Either the installer needs to come back, you need an auto electrician, or you need to learn automotive electricals yourself.   First step Id look at is where that big thing came out of, is there still things unplugged at that location? Maybe they just forgot to put a relay in or something?
    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
×
×
  • Create New...