Jump to content
SAU Community

Recommended Posts

I envy the quietness of your car! After a while off loudness you will be wishing you left it as is and IMO the induction noise is way cooler then a loud exhaust note.

If your exhaust flows well and your making the power your happy with and its nice and quiet. Thats something I would wish for before world peace!

I'm a fan for quietness but my exhaust was too restrictive so took out the middle muffler (don't have or need a cat in NZ) and now it goes well and is still not too loud.

Get a hacksaw (or better still a pipe cutter) and cut out your middle muffler and fit a bit of pipe temporarily. If you like the result get it welded in if not you can weld the middle muffler back in.

A loud exhaust is a good way to annoy the neighbours and attract the attention of the police.

Everyone has a different definition of "loud", that much is certain... and often the law has another view all together...

So do what you want TUF250, but just remember its highly likely any mods will almost ensure EPA's will come your way.

Are 3inch pipes any good for the car? Like say from the catback straight pipe no muffler or anything? could it mess my tune up if i change it? as i have a greddy one?

u mean flutes? be noisy as fark dont think its gona do anything to your performance positive or negative.

I dont want it to be silly, I had a V8 previously with just resinators and it sounded great but it really was stupid and eventually got annoying.

Unless my rb is over 4-5k rpm there really is no noise at all. My dads stock xr6 turbo makes more noise! I was just after a burble. Not into cannons, big resinators only or anything like that. Just wanted a bit of burble not bark.

Thats why I thought id leave the rear muffler (the biggest) and remove the centre but I dont want to make it too loud and get myself into trouble.

its a tricky one...

It literally makes almost no noise. It is completely drained drowned out by the induction noise.
If the induction noise is too loud, why not do something about quietening it, like enclosing it in an air box.
3 inch dump pipe high flow cat and lukey turbo muffler 3in 3 out. no police attention but loud enough and seems to flow enough

I have a 4 inch from my T88 turbo back. I had the exhaust custom made with a 4 inch dump coming out pointing at the ground (rotaflo muffler)

It's loud as f**k, on a piston engine it would probably be a little quieter.

  • 2 weeks later...

i've just got a 3" system from turbo back. with a single remus muffler. the sound is sweet. quiet when you're not on the gas and the system is nice and straight so a good note

coming down through the gears. but it has exceptional flow at WOT.

Edited by wacky_will

I would say to be cautious with mucking around with the exhaust chasing a given sound. Odds are you will end up with 'not quite what youre after' and louder than u want.

Quiet is better id say, and im in WA where you can do whatever the f*k you want :down:

My old R33 was loud as. Good for 10% of the time, annoying for the rest.

The current R33 makes twice the power but is quiet as. I love it. Then again i have a pod so it is dead quiet when chilling and an angry tornado under gas. Best of both worlds.

Maybe look at that mod to make turbo induction noise. I think it is a way sweeter noise than exhaust (as good as an RB can sound at the tailpipe) noted by another post above.

I turn way more heads with all induction noise on this one than all exhaust noise on the last one....

And yeah, Vic sounds very cop-strict so a loud exhaust is going to give you nightmares me-thinks.

Goodluck mate

thanks guys, ended up pulling that middle muffler out, quite happy now, only a touch louder and has a slightly deeper note, still very quiet highly doubt it will attract any more attention.

note. I am selling that straight through 3inch stainless muffler if anyone is interested in a high flow 'quiet' muffler

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If doing that ^, I'd take the idle up valve out and plug the hole in the pump.
    • You can try capping the power steering idle up valve at both ends if it's old. The valve and the intake manifold. That is something that is known to fail in Toyotas with age and it will suck power steering fluid into the intake and burn it in the engine which can cause issues. Then bleed it again with engine off first. Do like 30+ lock to lock turns with the front wheels off the ground.
    • Hi Brent, I am wondering if you ever worked this out? I have upgraded this unit to a newer one and everything works bar the reverse camera, so i really want to know what plugs are what so I can patch the camera through. many thanks in advance Mike
    • Once you have to get up in the morning and be useful, you suddenly value sleep it turns out :p
    • Update:   smoke test all pipes no issues cleaned reservoir   fluid put in ( dexron 3 atf)   steering turn side to side and could hearing  gurgling from steering rack which I assumed was air lock, opened one of the steering rack connections and could see loads of air getting pushed out( not sure if you meant to do that / whether it will re introduce air into system)   anyways, loads of side to side sound was gone. Turned car on, pump was slightly ( barely) wining so turned side to side few more turns and fluid level when car on was almost none in resorvoir which I guess is normal if car is one. Turned car of and fluid was gushing out. Almost 200-300cc was pushed out. Repeated engine off side to side followed  by engine on and same result       going mad now. It seems system is either sucking air in whilst on or there is tons of air which I am not giving it enough time to bleed. Thoughts?   would it work like brake caliper if I open steering rack copper pipes and let gravity pull all air out?   or maybe have a restriction somewhere? What is the red circled item, could that be blocked? It i
×
×
  • Create New...