Torque Wrench Setting

[ms33]

Has anyone got the torque wrench settings for the front suspension on a R33 GTR?

Can't find any info anywhere.

[blk94r33]

Has anyone got the torque wrench settings for the front suspension on a R33 GTR?

Can't find any info anywhere.

What components mate? Might be able to help you out.

[ms33]

Hi mate, thanks for the reply, I'm fitting some new camber links to the front suspension so I need the torque settings on the 2 rear bolts that attach to the suspension turret and the large bush at the front of the arm.

Cheers

What components mate? Might be able to help you out.

[krzysztof]

just do them up as tight as u can it wont really matter so long as the arm has movement and its tight enough not to ever work itself loose.

my guestimate would be 100-120NM which i think is about what i tighten wheel nuts too.. not to sure its either NM or FT-LBS, dont have my torque wrench infront of me so cant tell ya....

[blk94r33]

Will have a look at work for you tomorrow. But as above, firm, but that also depends on the size of the bolt/nut/thread. So long as you loctite them and do them up firm, they'll hold. Check tomorrow anyway.

[ms33]

Will have a look at work for you tomorrow. But as above, firm, but that also depends on the size of the bolt/nut/thread. So long as you loctite them and do them up firm, they'll hold. Check tomorrow anyway.

Thanks guys and thanks for checking for me blk94r33.

[blk94r33]

Flicked through all our look up charts and Auto-Encyclopedias, got nothing sorry mate :-/

[doo doo]

The same bolt on the R32 is torqued to 88-108Nm, but uses the same bolt inner and outer whereas the R33 uses two on the inner.

[ms33]

Thanks guys and blk34r33 for looking.