Jump to content
SAU Community

Recommended Posts

I have the hks 2835 pro s turbo on my car. Happy enough with the power. Most I've had it at is 267kw @ 15psi. Didnt want to strain the turbo too much after blowing my last one. Happy with the power and the lag.

Also as far as im aware hks have now brought out the 2835 kai turbo, which I believe is an improvement on the pro s. If you really want the 3076r I'd talk to Mick as well, as he is running it on his 25.

edit: one of the reasons I went with the hks turbo, was apart from the heatshield it pretty much looks factory, and is a direct bolt on.

  • Replies 100
  • Created
  • Last Reply

Top Posters In This Topic

Given Kris' claimed results on an internal, and the mention of police attention (I haven't been looked at twice by cops since I bought the car....first 5 or so months it had 5% tint all round so go figure) I'm leaning towards internal a little more at this stage, depending on just how much more external will end up being.

v66 still runs wasted spark I believe....unless I missed the part where they changed it. It's just the v44 but plug-in

EDIT: you said injector not ignition, my bad.

Edited by Trozzle

having made a boo-boo and ordered an EXTERNAL pump, not INTERNAL like I thought (bloody hell 040 and 044 look the same at a glance hey...) I'm now going to be receiving something I can't necessarily use all too easily. Can anyone point me in the direction of info regarding what's needed to use an external pump in place of an internal one? Might as well go with my f**kup now and use it, if it can be without too much trouble...

This is what you want...Bargain

Garrett gt3540 / gt35r bolt on turbo kit.. $2100 ono

.70 front, .82 rear, great condition - looks brand new, no smoke or oil residue anywhere, minimal/negligible shaft play

Includes Highmount manifold, 3" dump/front pipe & o2 sensor, braided oil feed line, water lines & fittings, external wastegate w/ screamer, stainless intake pipe to AFM, hose clamps & reducers, everything in the pictures! Can ship it anywhere in Oz

http://www.skylinesaustralia.com/forums/Wr...ts-t328761.html

Hey krayzie he could get that but the lag is just too bad on a 3540, i was considering upgrading my turbo to that but everyone kept saying its not that good for street due to the lag. There is a reason why many people say that the 3076R is the best turbo for the rb25 for street.

Heres my dyno sheet for my claimed power.

post-8025-1279177133_thumb.jpg

having made a boo-boo and ordered an EXTERNAL pump, not INTERNAL like I thought (bloody hell 040 and 044 look the same at a glance hey...) I'm now going to be receiving something I can't necessarily use all too easily. Can anyone point me in the direction of info regarding what's needed to use an external pump in place of an internal one? Might as well go with my f**kup now and use it, if it can be without too much trouble...

Im sure you will be able to get it to fit internally, just might need to customize the bracket to where its mounted too.

044 on factory rail

post-a295315-DSCF2644-.jpg

sweet, yeah I read into it quickly now that I'm home, and it can be mounted internally....just with modification to the bracket. That's ok with me lol.

And thanks for the dyno sheet man, makes me happy to see that work so well with internal gate etc

I'm not even after top end too much anyway, so a small drop up the top doesn't phase me. I realise that since I'm not after top end, that means I'm after response and pull...which is better with an external gate anyway :( either way, can't wait Kris I know I'll love it :D once I sort out how you have to mod this bracket for the 044 >.>

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Please do not connect it to your manifold. If you do, as GTS suggested please record the lot in 4K with good mics attached.   On the factory Skyline, there's a upside down pipe that allows it to breathe, looks like this   
    • For me I'd need some serious justification for why it has blown out.  Have you questioned him on it?  To be honest if you didn't question him right from the get-go on the first invoice that was already way over the initial quote and then you've (presumably) then paid another $1375 on top of the first invoice, then you're pushing shit uphill to get a favourable result now... It was years ago I last got an engineer out but it was around $450-$550 per visit.  That was just to inspect each progress point he gave me for the project.  Is he just doing progress inspections or is he providing engineering diagrams, technical assistance, etc??  If he's not, he's a filthy rip off merchant.  If the $3100 is the final sign off then you need to cop it on the chin, pay it and move on.  If it's not, piss him off and get a new one.  Not many Jeeps I'd value at $10K full stop let alone just engineering fees on a written off, half actual value WOVR Jeep....
    • Oh, yes. If you connected it to the manifold your first drive would be very eventful. Very shit. Very interesting. Perhaps take a video if you feel the need to see. Terminating the breather at the top of the bellhousing is normal/stock. Some gearbox lubes (hello Redline Shockproof) like to foam up a bit and require the breather to be extended up higher, so you don't get spots of smurf jizz staining the floor under your car. Mine is thus right up behind the head. Make sure you fit a u-bend at the top so it points back downward so that dirt and schmutz has a harder time getting into it.
    • Cheers for the replies. So i don't connect it to the manifold I just run the hose high up on the firewall?
    • It doesn't really answer your question...but is the head unit full android or just android auto, are you happy with how quickly it boots and responds, and do you have a link?  If we can identify good Android alternatives it will really help people stuck with Japanese screens. Did it have a separate reverse camera input so you would replace the factory one, or are you just going without now...that would be a pretty big steps back. And finally, do you have a picture of the "wire" that you can't plug in? Most likely it is some sort of aerial that is not too important eg japanese traffic or am radio or something if you haven't noticed a functionality issue
×
×
  • Create New...